Studies on the growth,structural, optical,SHG and thermal properties of γ-glycine single crystal: An organic nonlinear optical crystal

Single crystals of the organic nonlinear optical material γ-glycine have been grown in the presence of Zinc sulphate by slow evaporation technique at ambient temperature for the first time. Bulk growth of γ-glycine single crystals was grown by Top-seeded solution growth method. The γ-phase of glycine was confirmed by powder X-ray diffraction and the FTIR analysis. Elemental analysis CHN was performed to confirm the non-inclusion of zinc sulphate species into the solution. Inductively coupled plasma optical emission spectrometry study (ICP-OES) was employed to quantify the concentration of Zinc element in the grown γ-glycine single crystals. The optical transmission was ascertained from UV–Vis–NIR spectrum. The optical band gap was estimated for γ-glycine single crystal using UV–Vis–NIR study. Differential scanning calorimetry analysis was employed to explore information about thermal stability, phase transition and melting point of the grown crystal. The second harmonic generation relative efficiency was measured by Kurtz and Perry powder technique.     

Synthesis,spectral and thermal characterization of Bis(diethylammonium) tetrachloromercurate(II)-An nonlinear optical material

A new semiorganic compound, bis(diethylammonium) tetrachloromercurate(II) was grown by slow evaporation solution growth technique at ambient temperature from its aqueous solution. The crystal system and the cell parameters have been identified from the powder X-ray diffraction pattern. The UV–visible absorption of the compound shows absorption at 246 nm and there is absorption observed in the entire visible region indicates that the compound can be used as a nonlinear optical material. The UV–visible transmittance spectrum of grown crystal shows a lower cut-off wavelength at 275 nm and it was found that the crystal is suitable for optoelectronic applications. Thermal studies were carried out to find out the thermal stability and confirm the stoichiometric ratio of the compound. The thermal anomalies in DSC study indicate the occurrence of first order transition in the compound at low temperatures. The FTIR spectrum of the compound characterizes various functional groups. The various kinds of protons and carbons were assigned through NMR (¹H and ¹³C) spectroscopic techniques. The SHG efficiency of the compound was studied by Kurtz-Perry power technique and observed that it has SHG efficiency 1.5 times greater than that of potassium dihydrogen phosphate (KDP). The dielectric constant and dielectric loss of the compound decreases with increase in frequency.     

High pressures: Recent trends in materials science

Abstract

Pressure was developed during the 20th century. The most important illustration of the use of high pressure in Materials Science was the synthesis of diamond at the beginning of the fifties.

This contribution will describe the main scientific research axis developed these last years and based on high pressure (synthesis of new materials, stabilization of specific structures, crystal-growth, preparation of finely divided materials…).

In parallel some industrial developments will be analyzed.

In conclusion, the potential of high pressure will be sketched for the near future.     

Observation of transcrystalline growth of PLA crystals on sisal fibre bundles and the effect of crystal structure on interfacial shear strength

Hot-stage microscopy was used to characterise crystal growth at the interface between sisal fibre bundles and a polylactic acid (PLA) matrix in order to better understand the mechanical properties of sisal fibre–PLA composites. Cooling rates and crystallisation temperatures and times were varied to influence crystalline morphology at the interface. Single sisal fibre bundles were evaluated in their as received state or treated with 6 wt.% caustic soda solution for 48?h at room temperature. A microbond shear test was used to characterise the shear strength of the interface as a function of fibre surface treatment. These tests were performed on sisal fibre bundles carefully embedded in flat films of PLA supported on card mounts. Fibre bundles in a PLA matrix were cooled from 180?°C at rates from 2 to 9?°C/min and then crystallised isothermally. For as received fibre bundles uneven growth of PLA spherulites occurred at all cooling rates and crystallisation temperatures. For caustic soda treated fibres, uneven spherulitic growth was observed at crystallisation temperatures at and above 125?°C. In contrast, transcrystalline growth was observed for samples cooled to 120?°C at cooling rates from 2 to 6?°C/min and then allowed to crystallise. The microbond shear strengths of untreated and caustic soda treated fibre bundles were evaluated using Weibull statistics and the caustic soda treated fibres exhibited higher interfacial shear strengths in comparison to untreated fibres, reflecting the development of a transcrystalline layer at the fibre to matrix interface.     

Fractal and structural aspects of adhesion in particulate-filled polymer composites

Two types of composites based on poly(hydroxy ether) and graphite with various amounts of a filler have been investigated by various methods. The methods have been used to estimate the characteristics of adhesion and interfacial layer, including its thickness and tensile strength and interdependence between these values and adhesion. The results are treated on the basis of the theory of irreversible aggregation, cluster theory of the polymer structure and fractal analysis. It is established that all important characteristics of adhesion, interfacial layer and mechanical properties are interconnected with the difference between fractal dimensions of the surface of the aggregates of filler particles and of a polymer matrix, whose structure is distorted under the influence of the filler surface.     

分形烟尘簇团粒子的消光特性研究

根据物质的电结构,将烟尘簇团粒子离散为一系列的偶极子,利用离散偶极子近似方法,获得了不同波长电磁波入射情况下分形烟尘簇团粒子不对称因子、吸收和散射效率因子的值.结合偶极子在电磁场中的力学性质,分析了烟尘簇团粒子在外加电磁场中所受的力和力矩,给出三种分形结构烟尘簇团粒子的电磁辐射压力及电磁辐射力矩效率因子随入射波波长变化的数值结果,分析了烟尘粒子对电磁能量吸收的宏观表现和微观机理.结果显示:入射波长、烟尘簇团粒子的分形维数及所含原始微粒数目都将影响烟尘粒子的消光特性.     

Poly(butylene terephthalate‐co‐5‐tert‐butyl isophthalate) copolyesters: Synthesis,characterization, and properties

A series of poly(butylene terephthalate) copolyesters containing 5‐tert‐butyl isophthalate units up to 50 mol %, as well as the homopolyester entirely made of these units, were prepared by polycondensation from a melt. The microstructure of the copolymers was determined by NMR to be random for the whole range of compositions. The effect exerted by the 5‐tert‐butyl isophthalate units on thermal, tensile, and gas transport properties was evaluated. Both the melting temperature (T_m) and crystallinity were found to decrease steadily with copolymerization, whereas the glass‐transition temperature (T_g) increased and the polyesters became more brittle. Permeability and solubility slightly increased with the content in substituted isophthalic units, whereas the diffusion coefficient remained practically constant. For the homopolyester poly(5‐tert‐butyl isophthalate), all these properties were found to deviate significantly from the general trend displayed by copolyesters, suggesting that a different structure in the solid state is likely adopted in this case. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 92–100, 2005     

Influence of cation substitution on the magnetic properties of the FeCr2S4 ferrimagnet

The influence of cation substitution on the magnetic properties of single and polycrystals of FeCr₂S₄ spinel has been studied. The tetrahedral A-site substitution of the Fe by Cu in Fe_1−xCu_xCr₂S₄ was found to increase significantly the value of temperature T_m of the spin-glass like magnetization anomaly, whereas the octahedral B-site substitution of the Cr by In decreases T_m. This effect is suggested to result from a structural transformation influenced by variation of internal (chemical) pressure due to lattice contraction (Cu) or expansion (In). The observed reduced values of the Curie temperature for Cu-substituted single crystals compared to that of the polycrystalline samples are attributed to presence of Cl ions in samples detected by electron-probe microanalysis. The observed reduced value of saturation magnetization in the polycrystals compared to the single crystals is ascribed to the effect of surface anisotropy. Based on the experimental data the superexchange is concluded to be the dominant exchange interaction for 0≤x≤0.5 in Fe_1−xCu_xCr₂S₄, whereas the indirect exchange through the charge carriers is considered of minor importance.     

外来种喜旱莲子草的克隆生长特性

通过对外来种喜旱莲子草（Alternanthera philoxeroides（Mart．）Griseb）生长指标的测定和分析，研究了它的克隆生长规律，并探讨丁它的觅食行为．在一个生长季节内，喜旱莲子草生物量增加了近30倍，一级葡萄茎分株数增加了近50倍，最长的一级葡萄茎长度增长了近40倍，一级葡萄茎总长度增长了近13倍；一、二、三级葡萄茎上的总分株数增加了近130倍，3个级别匍匍苇总长度增长了近28倍．通过各级葡萄茎个数，葡萄茎总长度和葡萄茎总分株数比较发现，二级葡萄茎比一、二级葡萄苇生长的都要快，而一级葡萄茎的间隔物平均长度远远大于二级和三级葡萄茎．克隆植物的觅食行为与它的克隆生长紧密相连，从觅食行为来看，喜旱莲子草克隆构型随生长季节的变化说明了它对生长季节具有很强的适应性．这种快速克隆生长的特性和对生长季节的适应性有利于喜旱莲子成功入侵新的生境。