Polymer crystallization dynamics,as reflected by differential scanning calorimetry. Part 2: Numerical simulations

With the aid of a model for the kinetics of polymer crystallization, as put forward in previous publications, the shape of DSC-curves and their position on the temperature scale were simulated for various conditions of heat transfer in the apparatus. It turns out that the outcome is very dependent on the assumptions made with respect to these heat transfer conditions. For the ideal condition — no temperature differences between sample, pan and furnace — an invariable shape is predicted for the DSC-curves. They only shift to lower temperatures with increasing cooling rates. For more realistic conditions, the curves not only shift but become broader and their maxima decrease. They show a more familiar appearance. These calculations are very involved, however, A simple balance equation is shown to yield equivalent results, if a dimensionless characteristic number like the Nusselt number remains considerably smaller than one. This number contains an effective heat transfer coefficient between sample and furnace which, surprisingly, should not be too high. Apparently, the heat capacity of the pan does not play an important role under these conditions. This is investigated in Appendix II. Appendix I describes the procedure of the numerical simulations.     

Thermodynamic characterization of different actin isoforms

Summary The thermodynamic properties of the cardiac and skeletal a-actin isoforms were studied to characterize the molecular bases of the functional differences between them with the method of differential scanning calorimetry (DSC). The thermal properties of the actin filaments were described in the presence of calcium and magnesium ions as well. Based on the calculated free energy changes the α-cardiac actin filaments appeared to be more stable in its physiologically more relevant, magnesium saturated form. The magnesium saturated form of the α-cardiac actin filaments seemed to be more stable compared to the calcium saturated form of it. The enthalpy and entropy changes could differentiate between the α-cardiac and α-skeletal actin isoforms and between the calcium and magnesium saturated cardiac actin isoforms as well. Our results can demonstrate that the few differences between the amino acid sequences of the α-actin isoforms have an influence on the thermal properties and maybe on the function of these proteins as well.     

Microscopic Models for Proton Transfer in Water and Strongly Hydrogen-Bonded Complexes with a Single-Well Proton Potential

A new mechanism and formalism for proton transfer in donor-acceptor complexes with long hydrogen bonds introduced recently [1], is applied to a proton transfer in liquid water. Structural diffusion of hydroxonium ions is regarded as totally adiabatic process, with synchronous hindered translation of two closest water molecules to and from the reaction complex as crucial steps. The water molecules induce a gated shift of the proton from the donor to the acceptor in the double-well potential with simultaneous breaking/formation of hydrogen bonds between these molecules and the proton donor and acceptor. The short-range and long-range proton transfer as structural diffusion of Zundel complexes is also considered. The theoretical formalism is illustrated with the use of Morse, exponential, and harmonic molecular potentials. This approach is extended to proton transfer in strongly hydrogen-bonded donor-acceptor complexes. In contrast to the above model [1], the short hydrogen bond between the donor and acceptor moieties, however, completely erodes the barrier along the proton transfer mode. This introduces some physical pattern differences from proton transfer reactions in truly double-well potentials with a finite proton transfer barrier at the transition configuration with respect to the environmental nuclear coordinates. The differences apply particularly to the origin of the kinetic isotope effect. We discuss explicitly details of the excess proton conductivity in aqueous solution, but the concepts and formalism apply broadly to acid-base reactions, proton conduction channels, and other strongly hydrogen-bonded O- and N-proton donor-acceptor systems.     

Thermodynamics of Dipeptides in Water. Influence of the hydrophobic forces of the side-chains on the dissociation processes for some series of dipeptides

A calorimetric study has been carried out on the dissociation processes in water of both the free α-amino group belonging to the amino terminal residue and the free α-carboxyl groups belonging to the carboxyl terminal residue for a series having phenylalanine as the first common term. These thermodynamic quantities have been compared with those of the proton dissociation processes related to the same groups of the corresponding singleα-amino acids. The dissociation process values of this series have also been considered in connection with those obtained from others series of dipeptides previously studied, in an effort to compare the alkyl groups and benzene ring hydrophobic effects on the salvation processes of the zwitterions, undissociated molecules and ionic forms. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermodynamic study of the three isomers of bromo and iodobenzoic acids. Part II

Using our technique of combustion of small amount of a substance, we determined by calorimetry the standard molar enthalpy of formation in the condensed state and atT=298.15 K of the three isomers of bromo and iodobenzoic acids. Associating to these values their standard molar enthalpies of sublimation previously measured, it was possible to determine their standard molar enthalpies of formation in the gaseous state and atT=298.15 K. The experimental values of the thermodynamic properties _f H _m ^o (cr, 298.15 K), _f H _m ^o (cr, 298.15 K), _sub H _m ^o (298.15 K), and _f H _m ^o (g, 298.15 K) are given for the two series. From the experimental value of the standard molar enthalpy of atomization, it was possible to determine an enthalpy value for the C_b-Br and C_b-I bonds. The experimental and theoretical values of the resonance energy of bromo and iodobenzoic acids are compatible. The relative stability of some monosubstituted derivatives of benzoic acid studied in our laboratory is also discussed.Part I is concerned with Ref. 22 (for bromobenzoic acids) and with Ref. 23 (for iodobenzoic acids).     

The Use of Adiabatic Calorimetry for the Process Analysis and Safety Evaluation in Free Radical Polymerization

Adiabatic calorimetry is a technique that has been introduced as an important approach to hazard evaluation of exothermically reactive systems. In this paper the free radical polymerization of methyl methacrylate (MMA) has been studied. One of the most important aspects of MMA polymerization is its exothermicity and autoaccelerating behaviour, these characteristics can generate the occurrence of a runaway reaction.In a runaway situation the reacting system is close to adiabatic behaviour because it is unable to eliminate the heat that is being generated. An even worse situation can be reproduced in the laboratory with the Phi-Tec pseudo-adiabatic calorimeter. Process design parameters that are usually calculated from thermodynamic data or using semiempirical rules, such as adiabatic temperature rise or maximum attainable pressure, can be directly determined.The existence of the ceiling temperature has been experimentally demonstrated.This revised version was published online in November 2005 with corrections to the Cover Date.     

Using a new solvation model for thermodynamic study on the interaction of nickel with human growth hormone

Thermodynamics of the interaction between Ni²⁺ and human growth hormone (hGH) were determined at 27 °C in Nail solution by isothermal titration calorimetry. A new method to predict protein penetration and the effect of metal ions on the stability of proteins is introduced. The new solvation model was used to reproduce the enthalpies of Ni²⁺-hGH interaction over the whole range of Ni²⁺ concentrations. The solvation parameters recovered from the new equation, attributed to the structural change of hGH and its biological activity.     

Standard enthalpy of formation of lanthanum oxybritholites

Lanthanum-bearing silicate-oxyapatites or britholites, Ca_10–xLax(PO₄)_6–x(SiO₄)_xO with 1≤x≤6, have been synthesized by solid state reaction at high temperature. They were characterized by X-ray diffraction and IR spectroscopy. Using two microcalorimeters, the heat of solution of these compounds have been measured at 298 K in a solution of nitric and hydrofluoric acid. A strained least squares method was applied to the experimental results to obtain the solution enthalpies at infinite dilution, and the mixing enthalpy in two steps. In the first step the mixing enthalpy obtained is referenced to the britholite monosubstituted and to the oxysilicate. The mixing enthalpy referenced to the oxyapatite and to the oxysilicate is then extrapolated. In order to determine the enthalpies of formation of all the terms of the solution, thermochemical cycles were proposed and complementary experiments were performed. The results obtained show a decrease of the enthalpy of formation with the amount of Si and La introduced in the lattice. This was explained by the difference in the bond energies of (Ca–O, P–O) and (La–O, Si–O).     

An equilibrium and calorimetric investigation of the hydrolysis of L-tryptophan to (indole + pyruvate + ammonia)

Apparent equilibrium constants and calorimetric enthalpies of reaction have been measured for the reaction L-tryptophan(aq) + H₂O(l) = indole(aq) + pyruvate(aq) + ammonia(aq) which is catalyzed by L-tryptophanase. High-pressure liquid-chromatography and microcalorimetery were used to perform these measurements. The equilibrium measurements were performed as a function of pH, temperature, and ionic strength. The results have been interpreted with a chemical equilibrium model to obtain thermodynamic quantities for the reference reaction: L-tryptophan(aq) + H₂O(l) = indole(aq) + pyruvate^–(aq) + NH ₄ ⁺ (aq). At T=25°C and I_m=O the results for this reaction are: K^o=(1.05±0.13)×10^–4, G°=(22.71±0.33) kJ-mol^–1, H°=(62.0±2.3) kJ-mol^–1, and S°=(132±8) J-K^–1-mol^–1. These results have been used together with thermodynamic results from the literature to calculate standard Gibbs energies of formation, standard enthalpies of formation, standard molar entropies, standard molar heat capacities, and standard transformed formation properties for the substances participating in this reaction.Presented at the Symposium, 76^th CSC Congress, Sherbrooke, Quebec, May 30–June 3, 1993, honoring Professor Donald Patterson on the occasion of his 65^th birthday.     

Combined study of thermochemical properties of nitroform and its salts

A combined method for determination of the standard enthalpies of formation of nitroform and its salts was proposed. The enthalpies of dissolution of nitroform and its ammonium, hydrazinium, guanidinium, and potassium salts in water were measured. The enthalpy of combustion of hydrazinium salt of nitroform was determined by a combustion calorimetry, and its standard enthalpy of formation was calculated. The enthalpy of formation of trinitromethyl anion in indefinitely diluted aqueous solution −24.94±0.79 kJ mol⁻¹, was calculated on the basic of the data obtained for enthalpies of formation and dissolution of ammonium and hydrazinium salts of nitroform. Standard enthalpies of formation of nitroform and its salts were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2451–2454, December, 1998.