STUDY ON 1-HEXENE POLYMERIZATION BASED ON ZIEGLER-NATTA CATALYSTS WITH DOPED SUPPORT

A series of Ti/Mg supported catalysts are prepared by using ball-milled mixtures of MgCl2-ethanol adducts and NaCl as supports, and 1-hexene polymerizations catalyzed by the novel catalysts are studied. It is found that the molecular weight distribution of poly(1-hexene) becomes apparently narrower when catalysts with doped supports are used, indicating that changing the structure of the support is an effective way to regulate the active center distribution of heterogeneous Ziegler-Natta catalyst.     

Chemisorption of SO2 and Cl2 on indium oxide

The mutual influence of SO₂ and Cl₂ during their consecutive chemisorption on the In₂O₃ surface has been investigated. It was found that SO₂ is chemisorbed in the uncharged form, and the amount of chemisorption decreases as the temperature increases. The preliminary chemisorption of Cl₂ results in a dramatic decrease in the amount of SO₂ sorbed and in a change in the character of the bonding of SO₂ with the oxide surface. When SO₂ is sorbed first, the temperature of the formation of chlorides during subsequent chemisorption of Cl₂ decreases.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1718–1721, October, 1994.     

三核铁甲酸配合物的热解过程及其若干催化活性碎片的研究

三重桥氧三核铁甲酸配合物[Fe_3(μ_3-O)(μ-O_2CH)_6(H_2O)_2·(O_2CH)]·2H_2O的热反应行为十分有趣,其在热解过程某阶段失去部分配体后的碎片能活化乙炔进行加氢或加水反应生成乙烯、乙醛和丙酮,为揭示这些活性碎片的本质,我们应用了原位红外光谱(in situ IR),热重(TG)、差热分析(DTA),气相色谱(GC)、X-射线粉未衍射(XRD)和质谱(MS)等手段综合研究该化合物的热解过程,求出各热解碎片的组成,并研究它们在不同条件下的反应性能.本文报道它们相互验证的定性及定量结果.     

铁-钼/活性炭催化剂的费-托合成反应性能

用微型固定床反应器和原位穆斯堡尔谱考察了在活性炭担载的铁-钼双金属催化剂上的费-托合成反应和在反应条件下的物相。已知在费-托合成中铁有利于生成长链烃,钼有利于生成低碳烃。铁-钼/活性炭催化剂则综合了铁和钼的性质,其中铁-钼/油棕炭催化剂具有很好的活性和液化石油气选择性。在反应中,富钼催化剂的主要物相为铁-钼碳化物,而富铁催化剂的物相则为铁-钼碳化物和e’-Fe_2·2C碳化铁。     

Effect of Thiourea on the Kinetics of the Hydrogen Evolution Reaction at Iron and the Transport of Hydrogen through a Steel Membrane in Solutions of C<Subscript>2</Subscript>H<Subscript>4</Subscript>(OH)<Subscript>2</Subscript>-H<Subscript>2</Subscript>O-HCl

The effect of thiourea (0.5–10 mM) on the kinetics of the hydrogen evolution reaction (HER) at iron and the hydrogen transport through a steel membrane out of ethylene glycol (containing 2 and 10 wt % H₂O) and aqueous solutions containing HCl (0.1–0.99 M) with a constant ionic strength equal to unity is studied in parallel experiments. The presence of 0.5 mM of thiourea in the solutions raises the overvoltage of hydrogen evolution, while a subsequent increase in its concentration does not effect the HER kinetics. The dependence of the flux of hydrogen diffusion through the membrane on the thiourea content passes through a maximum.     

Triethylborane as an efficient promoter for palladium-catalyzed allylation of active methylene compounds with allyl alcohols

Without prior activation of allyl alcohols, allylation of a variety of active methylene compounds with allyl alcohols proceeds smoothly at rt-50°C in the presence of catalytic amounts of Pd(OAc)₂ (1-10 mol%), Et₃B (30-240 mol%), a phosphine ligand (1-20 mol%), and a base (0 to 50-60 mol%).     

Optically active polymers containing side-chain photochromic moieties: Synthesis and chiroptical properties of copolymers of trans-4-(phenylazo)-1-naphthyl acrylate and trans-4-(1-naphthylazo)-phenyl acrylate with (?)-menthyl acrylate

The synthesis of photochromic optically active copolymers from trans-4-(phenylazo)-1-naphthyl acrylate (PANA), or trans-4-(1-naphthylazo)-phenyl acrylate (NAPA), and (?)-menthyl acrylate (MtA) is described. The copolymers prepared, having different contents of trans-phenylazonaphthalene moieties, have been characterized by IR, ¹H-NMR, UV, and GPC techniques. The chiroptical properties have been investigated by circular dichroism (CD) and the induced optical activity on the side-chain trans-phenylazonaphthalene chromophores discussed in terms of different conformational situations of the macromolecules in both the copolymer series. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of new optically active poly(amide‐imide)s containing epiclon and L‐methionine moieties in the main chain

Epiclon [3a,4,5,7a‐tetrahydro‐7‐methyl‐5‐(tetrahydro‐2,5‐dioxo‐3‐furanyl)‐1,3‐isobenzofurandione] (1) was reacted with L ‐methionine (2) in acetic acid and the resulting imide‐acid 3 was obtained in high yield. The diacid chloride 4 was prepared from diacid derivative 3 by reaction with thionyl chloride. Thermostable poly(amide‐imide)s containing epiclon structure were synthesized by reacting of diacid chloride 4 with various aromatic diamines. Polymerization reaction was performed by two conventional methods: low temperature solution polycondensation and short period reflux conditions. In order to compare conventional solution polycondensation reaction methods with microwave‐assisted polycondensation, the reactions were also carried out under microwave conditions with a small amount of o‐cresol that acts as a primary microwave absorber. The reaction mixture was irradiated for 6 min with 100% radiation power. Several new optically active poly(amide‐imide)s with inherent viscosity ranging from 0.15 to 0.36 dl/g were obtained with high yield. All of the above polymers were fully characterized by ¹H‐NMR, FT‐IR, elemental analyses and specific rotation techniques. Some structural characterizations and physical properties of these new optically active poly(amide‐imide)s are reported. Copyright © 2005 John Wiley & Sons, Ltd.     

Doped Sol-Gel Films for Silica-on-Silicon Photonic Components

Further expansion of optical communication systems depends strongly on the development of cheap component technologies for functions such as switching, demultiplexing and amplification. Silica-on-silicon is increasingly recognised as the best approach to low cost integrated optics for such applications, but so far the functionality is limited. The purpose of NODES, a basic research collaboration sponsored by the European Union under the programme ESPRIT, has been to examine the application of sol-gel to a highly functional silica-on-silicon technology. In particular, the project has investigated film processing and characterisation, rare-earth doping for amplification, and semiconductor nanocrystallite doping for nonlinear functions. This paper presents the background and context to this work, summarises the technical results obtained, and discusses requirements and challenges for successful application of sol-gel in photonics.     

Performance of quantitative analyses by liquid chromatography–electrospray ionisation tandem mass spectrometry: from external calibration to isotopomer-based exact matching

Liquid chromatography–tandem mass spectrometry (LC-MS/MS) is a versatile coupling system which combines both selectivity and sensitivity and certainty. Hence, it is generally considered as the most reliable technique to quantify chemical compounds in complex matrices. In the present paper, we evaluate the performance of LC-MS/MS methods for the quantification of 3-nitrotyrosine in human urine in order to point out its dependence on the design of the quantification method, and emphasize the role of matrix effects in the performance. We compare external and internal calibrations, isotope dilution and isotopomer-based exact matching. The role of both sample preparation and multiple transitions monitoring is particularly addressed.