直接测距型激光主动成像系统发展现状

对直接测距型激光主动成像系统进行了深入研究。按照工作方式分类介绍了国外相关研究机构激光主动成像系统的工作原理及系统参数, 归纳总结并比较分析了各工作方式的优缺点。分析认为:基于单点或小面阵探测器配合光机扫描方案可实现较远作用距离, 但其对激光器重频要求较高, 后续数据处理复杂, 且系统体积、功耗较大;而基于Flash探测器的激光主动成像系统易于实现小型化, 对激光器重频要求较低。作用距离受限问题可通过电子扫描得以有效解决。在具体应用时, 需根据实际需求, 综合考虑系统体积、质量、功耗、激光器输出峰值功率及脉冲重复频率、所能获取的探测器类型、后续数据处理能力等多种因素折衷选取。     

脉冲单频Nd:YVO4激光器及其倍频输出特性研究

为了研制激光干涉成像所需的主振荡功率放大(MOPA)结构脉冲单频激光器,本文完成MOPA激光器的种子源即声光调Q脉冲单频1 064 nm激光器的特性研究,同时完成种子源腔外倍频绿光特性研究。脉冲单频激光器采用声光调Q模块实现脉宽约20 ns的1 064 nm脉冲激光输出,采用环形腔设计并采用一组不同厚度的标准具实现单纵模运转。实验研究基频1 064nm和倍频532 nm激光脉冲的线宽,得出在全脉宽范围内都具有较高时间相干性的结论。实验分别获得脉宽约28 ns峰值功率约6.5 kW的1 064 nm脉冲单频激光和脉宽约20 ns、峰值功率约0.5 kW的532 nm脉冲单频激光,腔外倍频效率为5.6%。实验同时也验证了腔外倍频的激光脉宽压缩效应。     

New optically active poly(amide–imide)s from N-trimellitylimido-l-amino acid and 1,2-bis[4-aminophenoxy]ethane in the main chain: Synthesis and characterization

Six new optically active poly(amide–imide)s (PAIs) with good inherent viscosities were synthesized from the direct polycondensation reaction of N-trimellitylimido-l-amino acids with 1,2-bis[4-aminophenoxy]ethane by direct polycondensation in a medium consisting of N-methyl-2-pyrrolidone (NMP)/triphenyl phosphite (TPP)/calcium chloride (CaCl₂)/pyridine (py). Diamine was synthesized by using a two-step reaction. At first 1,2-bis[4-nitrophenoxy]ethane was prepared from the reaction of two equimolars 4-nitrophenol and one equimolar 1,2-dibromo ethane and the dinitro compound was reduced by using Pd/C. Also N-trimellitylimido-l-amino acids were synthesized by the condensation reaction of trimellitic anhydride with two equimolars of various l-amino acids in acetic acid solution. The polymerization reactions produced a series of optically active PAIs with a high yield and good inherent viscosity. The resulted polymers were fully characterized by means of FTIR and ¹H NMR spectroscopy, elemental analyses, inherent viscosity, specific rotation, solubility tests, thermogravimetric analysis (TGA), and a derivative of thermogravimetric (DTG) analysis.     

Tandem CH Activation/Arylation Catalyzed by Low‐Valent Iron Complexes with Bisiminopyridine Ligands

Tandem C?H activation/arylation between unactivated arenes and aryl halides catalyzed by iron complexes that bear redox‐active non‐innocent bisiminopyridine ligands is reported. Similar reactions catalyzed by first‐row transition metals have been shown to involve substrate‐based aryl radicals, whereas our catalytic system likely involves ligand‐centered radicals. Preliminary mechanistic investigations based on spectroscopic and reactivity studies, in conjunction with DFT calculations, led us to propose that the reaction could proceed through an inner‐sphere C?H activation pathway, which is rarely observed in the case of iron complexes. This bielectronic noble‐metal‐like behavior could be sustained by the redox‐active non‐innocent bisiminopyridine ligands.     

Scanning Droplet Cell for Chemoselective Patterning through Local Electroactivation of Protected Quinone Monolayers

A reagentless strategy for template‐free patterning of uniformly inert surfaces is suggested. A layer of p‐hydroquinone (HQ) protected by the tert‐butyldimethylsilyl (TBDMS) group is electrografted onto glassy carbon electrodes. Chemoselective activation is performed through electrochemically controlled cleavage of the TBDMS group, which yields the redox‐active surface‐confined quinone moieties. The latter are shown to undergo electrochemically induced Michael addition, which serves for subsequent functionalization of the electrode surface. Patterning of the TBDMS–quinone‐modified surface is accomplished by using selective localized cleavage of the protecting group. State‐of‐the‐art direct‐mode scanning electrochemical microscopy (SECM) patterning fails to yield the anticipated interfacial reaction; however, the electrochemical scanning droplet cell (SDC) is capable of conducting the localized chemoselective reaction. In a small area, dictated by the dimensions of the droplet, electrochemically induced cleavage of the protecting group can be performed locally to give rise to arrays of active quinone spots. Upon deprotection, the redox signals, attributed to the hydroquinone/benzoquinone couple, provide the first direct evidence for chemoselective electrochemical patterning of sensitive functionalities. Subsequent SECM studies of the resulting modified areas demonstrate spatial control of the proposed patterning technique.     

大孔Mo-Ni/Al_2O_3催化剂的催化裂化柴油加氢性能研究

采用三次纳米自组装合成法,制备了一种以二次纳米自组装Al2O3为主体的大孔主客体催化剂FA-40,具有0.78 cm3·g-1的孔容、114 m2·g-1的比表面积、27 nm的平均孔径、6.0 nm和40 nm的双峰孔结构、孔分布在10~100 nm高度集中、低堆积密度为0.56 g·cm-3、活性金属含量高达35.70%。XRD和TEM分析结果显示,活性金属以直径小于2 nm的微晶态纳米粒子形式均匀分散于主体表面。采用劣质催化裂化柴油进行20 h加氢实验评价,反应趋于稳定时,FA-40的脱硫、脱氮及芳烃饱和率分别达到94.4%、95.5%和67.9%,与F-5相比分别提高了20%、80%和140%。300 h的长周期加氢实验表明,FA-40具有良好的加氢性能。     

Co3O4纳米晶催化氧化甲烷的理论研究：C-H键活化的晶面效应及活性中心

甲烷是一种在自然界中大量存在的原材料,在取代原油和合成重要化工产品等许多领域具有潜在的应用价值. 然而,由于CH₄中C-H键的键能特别大（约~4.5 eV）,如何实现甲烷的绿色有效转化在化学化工领域仍然是一个挑战. 本文采用密度泛函理论对Co₃O₄（001）和（011）晶面活化甲烷C-H键的机理进行了理论研究,得到了如下结论：（1） CH₄的C-H键在Co₃O₄晶面的解离具有很高的活性,只需要克服大约1 eV的能垒;（2）与Co^2＋相连的Co-O离子对是CH₄活化的活性位点,其中两个带正负电荷的离子对C-H解离起着协同作用,帮助产生Co-CH₃和O-H物种;（3）（011）面的反应活性明显大于（001）面,与实验的观察一致. 本文的计算结果表明,Co₃O₄纳米晶面对CH₄中C-H键的活化表现出明显的晶面效应和结构敏感效应,Co-O离子对活性中心对于活化惰性的C-H键发挥了关键作用.     

Copper–Oxygen Dynamics in the Tyrosinase Mechanism

The dinuclear copper enzyme, tyrosinase, activates O₂ to form a (μ-η²:η²-peroxido)dicopper(II) species, which hydroxylates phenols to catechols. However, the exact mechanism of phenolase reaction in the catalytic site of tyrosinase is still under debate. We herein report the near atomic resolution X-ray crystal structures of the active tyrosinases with substrate l -tyrosine. At their catalytic sites, CuA moved toward l -tyrosine (CuA1 → CuA2), whose phenol oxygen directly coordinates to CuA2, involving the movement of CuB (CuB1 → CuB2). The crystal structures and spectroscopic analyses of the dioxygen-bound tyrosinases demonstrated that the peroxide ligand rotated, spontaneously weakening its O−O bond. Thus, the copper migration induced by the substrate-binding is accompanied by rearrangement of the bound peroxide species so as to provide one of the peroxide oxygen atoms with access to the phenol substrate's ϵ carbon atom.     

Unveiling the Promotion of Surface-Adsorbed Chalcogenate on the Electrocatalytic Oxygen Evolution Reaction

Transition metal chalcogenides (TMCs) are efficient oxygen evolution reaction (OER) pre-electrocatalysts, and will in situ transform into metal (oxy)hydroxides under OER condition. However, the role of chalcogen is not fully elucidated after oxidation and severe leaching. Here we present the vital promotion of surface-adsorbed chalcogenates on the OER activity. Taking NiSe₂ as an example, in situ Raman spectroscopy revealed the oxidation of Se-Se to selenites (SeO₃²⁻) then to selenates (SeO₄²⁻). Combining the severe Se leaching and the strong signal of selenates, it is assumed that the selenates are rich on the surface and play significant roles. As expected, adding selenites to the electrolyte of Ni(OH)₂ dramatically enhance its OER activity. And sulfates also exhibit the similar effect, suggesting the promotion of surface-adsorbed chalcogenates on OER is universal. Our findings offer unique insight into the transformation mechanism of materials during electrolysis.     

Effects of acid etching on the structure of PtNi catalyst and total exposed active sites

The integration technology of hydrogen preparation–hydrogen storage not only can utilize hydrogen energy efficiently but also can improve the selectivity of the electrode maximally. In the present work, the structure and composition of the PtNi catalyst was characterized by X-ray diffraction (XRD); and its electrochemical properties, morphology, and surface binding energy were analyzed by cyclic voltammetry (CV) and linear scanning voltammetry (LSV), scanning electron microscopy equipped with energy-dispersive spectrometry (SEM-EDS), and X-ray photoelectron spectroscopy (XPS), respectively. The effects of different acid etching treatments (e.g., etching time, etchant concentration, and etching temperature) on the structure and surface active sites were investigated by the orthogonal experiment. The experimental results reveal that after etching with 0.5 mol/L of perchloric acid for 0.5 h at 60°C, the electrode weight loss of the PtNi catalyst is mainly attributed to the large loss of Ni atoms in film layer. This results in the reduced alloy phase in film layer and the appearance of Pt characteristic diffraction peak. The relative content of Pt on the surface of the film electrode increases significantly, and the total number of active sites also increases correspondingly. The binding energy of Pt4f_7/2 decreases by 0.19 eV, and the number of active sites involved in hydrogen release decreases, indicative of the reduced promotion effect of the PtNi catalyst on hydrogen release.