Aerobic Double Dehydrogenative Cross Coupling between Cyclic Saturated Ketones and Simple Arenes

The synthesis of 3‐aryl‐2‐cyclohexenones is a topic of current interest as they are not only privileged structures in bioactive molecules, but they are also relevant feedstocks for the synthesis of substituted phenols or anilines, which are ubiquitous structural elements both in drug design and medicinal chemistry. A simple and sustainable one‐pot aerobic double dehydrogenative reaction under mild conditions for the introduction of arenes in the β‐position of cyclic ketones has been developed. Starting from the corresponding saturated ketone, this reaction sequence proceeds under relatively low Pd catalyst loading and involves catalytic amounts of electron‐transfer mediators (ETMs) under ambient oxygen pressure.     

气固相法合成的Ti-ZSM-5催化剂上苯乙烯氧化反应的宏观动力学

 采用TiCl4气固相同晶取代法制得的Ti－ZSM－5作催化剂,对H2O2氧化苯乙烯反应的宏观动力学进行了研究,考察了催化剂、苯乙烯和H2O2用量及反应温度对苯乙烯氧化反应速率的影响．结果表明,催化剂Ti－ZSM－5和底物苯乙烯对苯乙烯氧化反应速率的贡献均为一级,而H2O2为1／2级;苯乙烯氧化反应的表观活化能Ea＝48．14kJ／mol．当以丙酮为溶剂,在n（PhCH∶CH2）／n（H2O2）＝7．91,催化剂用量为20g／L,反应温度为343K的条件下,反应360min时,苯乙醛选择性和H2O2利用率分别可达91．9％和88．6％．     

Iron carbonyl complexes from 2-[2,3-diaza-4-(2-thienyl)buta-1,3-dienyl]thiophene: N---N bond cleavage and cyclometalation

When thienyl Schiff base 1, derived from 2-formylthiophene and hydrazine, reacted with Fe₂(CO)₉ in n-hexane, three major complexes were obtained: (1) a diironhexacarbonyl complex with two 2-thienylmethylideneamido bridging ligands 2, which resulted from the =N---N= bond cleavage of ligand 1; (2) a doubly cyclometalated di-μ-di-(η¹:η²-thienyl; η¹:η¹(N))bis(hexacarbonyldiiron) complex (3); and (3) a cyclometalated (μ-η¹:η²-thienyl; η¹:η¹(N))hexacarbonyldiiron complex (4). Molecular structures of compounds 1a, 1c, and 2a have been determined by single-crystal X-ray diffraction.     

Metrological role of neutron activation analysis. IA. Inherent characteristics of relative INAA as a primary ratio method of measurement

In a series of three papers, the inherent characteristics of relative instrumental neutron activation analysis (INAA) as a primary ratio method of measurement, the unique functions of parametric INAA as an ideal back-up method of the relative INAA, and the valuable role of INAA in characterization of sampling behavior of individual elements in certified reference materials (CRMs) will be discussed. In this paper, the first of the series, the uncertainty evaluation and the traceability of values measured by neutron activation analysis (NAA), especially instrumental NAA (INAA), will be described to demonstrate the method at its ”the state-of-the-art” level can meet CCQM criteria for a primary ratio method. The scope and examples will be given. Received: 19 March 2001 Accepted: 2 October 2001     

The Characteristics of Mechanically Activated Mixtures of Copper Hydroxocarbonate With Aluminium

The chemical and physical processes occurring during grinding of copper hydroxocarbonates mixtures with aluminium were studied. A planetary ball mill was used. A thermogravimetry and X-ray powder diffraction method allowed to determine the composition of solid products after mechanical activation. The amount of the Cu₂(OH)₂CO₃ undecomposed andAl₂O₃⋅3H₂O, CuO, Al₂O₃, Cu⁰, Cu_xAl_y alloys and remained Al0 in the systems is strongly dependent on the duration of grinding and on the proportion of components. The comparative results are presented. This revised version was published online in July 2006 with corrections to the Cover Date.     

Microwave activation of electrochemical processes: enhanced PbO2 electrodeposition, stripping and electrocatalysis

Microwave activation of electrochemical processes has recently been introduced as a new technique for the enhancement and control of processes at electrode|solution (electrolyte) interfaces. This methodology is extended to processes at glassy carbon and boron-doped diamond electrodes. Deposition of both Pb metal and PbO₂ from an aqueous solution of Pb²⁺ (0.1 M HNO₃) are affected by microwave radiation. The formation of PbO₂ on anodically pre-treated boron-doped diamond is demonstrated to change from kinetically sluggish and poorly defined at room temperature to nearly diffusion controlled and well defined in the presence of microwave activation. Calibration of the temperature at the electrode|solution (electrolyte) interface with the Fe^3+/2+ (0.1 M HNO₃) redox system allows the experimentally observed effects to be identified as predominantly thermal in nature and therefore consistent with a localized heating effect at the electrode|solution interface. The microwave-activated deposition of PbO₂ on boron-doped diamond remains facile in the presence of excess oxidizable organic compounds such as ethylene glycol. An increase of the current for the electrocatalytic oxidation of ethylene glycol at PbO₂/boron-doped diamond electrodes in the presence of microwave radiation is observed. Preliminary results suggest that the electrodissolution of solid microparticles of PbO₂ abrasively attached to the surface of a glassy carbon electrode is also enhanced in the presence of microwave radiation. Electronic Publication     

Cobalt activation of Bacillus BR449 thermostable nitrile hydratase expressed in Escherichia coli

Expression of nitrile hydratase enzymes utilized in a new “green” process for acrylamide production has proven difficult in Escherichia coli owing to lack of a cobalt transport system to introduce the required cobaltion into this host. We describe the expression of a thermostable nitrile hydratase from a moderatethermophile Bacillus sp. BR449 in E. coli in which the cobaltrequired for enzyme activation is introduced by incubation, of the apoenzyme in the presence of Co⁺⁺ ion at 50°C, yielding active and thermostable, enzyme.     

Mechanisms of the reactions of propane with CBr3+ cation and superelectrophilic complex CBr4+·AlBr3- containing a bromine-centered cationic center: a theoretical study

Fragments of the potential energy surfaces (PES) of the systems [C₃H₈ + CBr₃ ⁺] and [C₃H₈ + Br₂CBr⁺·Br₂AlBr₂ ^–] were simulated by the MNDO/PM3 method. Energy minima corresponding to weakly bound adducts of propane molecule with the CBr₃ ⁺ cation or neutral complex CBr₃ ⁺·AlBr₄ ^– were found on the PES's of both systems. These are adducts with the coordination of a H atom of the methylene group of the propane molecule to the electrophile at the Br atom carrying the largest positive charge. As the fragments of the adducts are brought close together, the coordinated H atom migrates to the C atom of the CBr₃ ⁺ fragment. The potential barriers of these migrations were found to be low for both systems. The reactions proceed without formation of cyclic intermediates or transition states typical of the Olah mechanism.     

Effects of Initial Phenol-formaldehyde (PF) Reaction Products on the Curing Properties of PF Resin

Differential scanning calorimetry(DSC) was used to study the effects of varying NaOH concentrations on the thermochemical curing properties of 2,4-dimethylol phenol (2,4-DMP), and 2,6-dimethylol phenol(2,6-DMP). Analysis of the DSC curves showed significant differences in the thermochemical curing behavior of these compounds with increasing NaOH:DMP molar ratios, in terms of the peak shape, position of the reaction peaks, (T _p), along the temperature scale and energy of activation, E. The curves consisted of either a single, two or three exothermic peaks which indicated the occurrence of multiple reactions. One of these peaks was observed for the entire range of NaOH molar ratios, and is attributed to the self-condensation reaction. For the 2,4-DMP, NaOH had the effect of lowering the T _p of curing from 212°C in the uncatalyzed state to135°C between 0.15–0.75 molar ratios. The lowest value of E, however, was 111 kJ mole⁻¹, only through 0.45–0.60 molar ratios and this combined with the above, points to this concentration range as the optimum NaOH level. Similarly, the T _p of curing for the 2,6-DMP was lowered from 211°C in the uncatalyzed state, to a minimum of 116°C at the NaOH:2,6-DMP molar ratio of 0.45. At this ratio, Ealso had the lowest value of 117 kJ mole⁻¹ and this suggests that 0.45 molar ratio is the optimum NaOH level. This revised version was published online in July 2006 with corrections to the Cover Date.     

Co (II)‐C12 alkyl carbon chain multi‐functional ionic liquid immobilized on nano‐SiO2 nano‐SiO2@CoCl3‐C12IL as an efficient cooperative catalyst for C–H activation by direct acylation of aryl halides with aldehydes

Nano‐silica supported ionic liquids composed of alkyl carbon chain and transition metal chlorides anions have been prepared and successfully applied as a heterogeneous catalyst in the direct aldehyde C‐H activation. Catalytic results indicated that nano‐SiO₂ supported ionic liquid consisting C12 alkyl carbon chain and CoCl₃ anion nano‐SiO₂@CoCl₃‐C12IL showed excellent catalytic properties with good to excellent yields towards the desired aryl ketones. The excellent recyclability of the supported catalyst, mild reaction conditions, low catalyst loading, and operational simplicity are the important features of this methodology.