用任意偏向角测量三棱镜折射率

本文给出用任意偏向角测量三棱镜折射率的理论公式和实验方法，并给出与最小偏向角法测量结果的比较，具有几乎一样的误差。     

NONLINEAR THEORY OF MULTILAYER SANDWICH SHELLS AND ITS APPLICATION(III)──LARGE DEFLECTION AND POSTBUCKLING OF SHALLOW SHELLS

Exactsolutionsoflargedeflectionandpostbucklingofrectangularplatesaredifficultproblems.Usually,appropriateseriesofsolutionsbasedonspecificboundaryareassumedtosolvetheproblems['].LiuandChengl'lsolvedthenonlinearbendingproblemofsimplysuPPortedrectangularsand…     

THE METHOD OF THE RECIPROCAL THEOREM OF FORCED VIBRATION FOR THE ELASTIC THIN RECTANGULAR PLATES(Ⅲ)—CANTILEVER RECTANGULAR PLATES

In this paper,applying the method of the reciprocal theorem,we give the stationarysolutions of the forced vibration of cantilever rectangular plates under uniformly distributedharmonic load and concentrated harmonic load acting at any point of the plates,the figuresand tables of number value of bending moment and the deflection amplitudes as well.     

Cornerning radial tyres

An angular difference between direction of wheel motion and wheel plane produced a lateral force on a rolling tyre. A simple mechanism of shear stress generation in the contact area of tread is used. The coefficient of friction plays a limiting role. The resulting lateral force and self-aligning torque are computed by means of the belt model of a radial tyre. Finally, some numerical results are given to illustrate the theory.     

Bit Constraints Analysis of Multihop All-Optical Networks with Deflection Routing

１ＩｎｔｒｏｄｕｃｔｉｏｎＴｏｏｖｅｒｃｏｍｅｔｈｅｅｌｅｃｔｒｏｎｉｃｂｏｔｌｅｎｅｃｋｏｆｃｏｎｖｅｎｔｉｏｎａｌｏｐｔｉｃａｌｐａｃｋｅｔｓｗｉｔｃｈｉｎｇｎｅｔｗｏｒｋｓ，ａｌｏｐｔｉｃａｌｐａｃｋｅｔｓｗｉｔｃｈｉｎｇｎｅｔｗｏｒｋｓａｒｅ...     

关于声光效应光束偏转角的实验研究

对声光效应中光束偏转角进行了一系列实验研究.基于传统声光效应的基本原理,建立了光束偏转角理论模型并进行了相关计算.在此基础上进行声光效应的布拉格衍射实验.大量实验结果显示,所测量到的光束偏转角和理论值存在一定的差距.     

光热偏转光谱法的研究

为了建立棱镜型光热偏转光谱法的理论框架,采用棱镜的光色散特性研究了激励光源对待测样品表面周期性照射情况下的探测光偏转角与光热信号之间的解析关系。得到了棱镜型样品表面周期性变化的偏转角表达式。实现结果表明,该方法比传统型光谱法具有理论模型简单、实验容易实现、分辨率高、灵敏度高等优点。     

Thermal noise limit in measuring the gravitational constant G using the angular acceleration method and the dynamic deflection method

A general comparison is made between two methods of measuring the gravitational constant G. The angular acceleration method can avoid the anelasticity effect since the torsion fiber is not twisted. The dynamic deflection method is similar in principle but it does not use feedback, therefore a major noise introduced by the feedback control system in the angular acceleration method can be avoided. Both methods have their advantages and can be performed with the same device. Based on different expressions of G, we have expressed the signal-to-noise ratio and calculated the thermal noise limit for both methods. In order to get a lower thermal noise limit, the dynamic deflection method should avoid resonance.     

用于瞬态力学量测试的光学传感器设计及应用

基于光纤耦合反射式光束偏转法,提出了一种可用于瞬态力学量测试的光学传感器,并详细给出了该测试机理.采用该传感器,在靶材对心处实时检测到由于空泡在固体靶材附近溃灭时射流冲击力引起的靶材瞬态微小变形.通过对该传感器定标可以进一步得到作用冲击力大小.这种传感器的应用将有助于了解激光诱导产生空泡射流运动特性及其对靶材的损伤机制.