Real-time acoustic classification of sperm whale clicks and shipping impulses from deep-sea observatories

The automated real-time detection and classification of cetacean and anthropogenic sounds from deep-sea observatories can play a key role to study cetaceans in the field, to quantify the impact of anthropogenic sounds or to initiate mitigation measures during potentially harmful human activities. In the area of the NEMO-ONDE deep-sea observatory, sperm whales are often present together with heavy shipping. The spatial coincidence of both sound sources allows for the long term monitoring of their interaction. Some ships produce impulsive sounds and the automated separation of these impulses from sperm whale clicks is not a trivial task. As part of a detection, classification and localisation system for acoustic data from marine observatories, we present four modules performing the automated real-time classification of clicks from sperm whales and impulsive sounds produced by ships. First, two modules detect segments that contain impulsive sounds within a specifiable frequency band and return the impulses’ positions. Then, two modules classify the detected impulses as sperm whale clicks or ship impulses. Finally, at the level of 22 s segments, the classification outputs from individual impulses are combined into a decision on the presence of sperm whale clicks or ship impulses. The modules’ reliability was tested on data from the NEMO-ONDE observatory. Training and testing data were separated by more than 2 months, enabling to assess the consistency of the predictions over the long term. The automated separation between segments of the two classes was high with area under the ROC curve (AUC) values between 0.94 and 0.98.     

Finite element modeling of the interaction of laser-generated ultrasound with a surface-breaking notch in an elastic plate

The interaction of surface acoustic waves generated by laser line source in the thermoelastic regime with surface notches are investigated. The finite element method is used to establish the model of the transient displacement field for surface notches with various depths and orientation. The magnitude of the signal enhancement in the near field and the mechanism by which this occurs are explained. The positions of notches were evaluated by the reflected Rayleigh wave. The depths and orientations of the notches were also determined using a shear wave that was generated through mode conversion of a surface acoustic wave at the notch tip. The results agree with previously published experimental measurements.     

Elastic friction drive of surface acoustic wave motor

Importance of elastic deformation control to obtain large output force with a surface acoustic wave (SAW) motor is discussed in this paper. By adding pre-load to slider, stator and slider surfaces are deformed in a few tens nanometer. Appropriate deformation in normal direction against normal vibration displacement amplitude of SAW existed. By moderate deformation, the output force of the SAW motor was enlarged up to about 10 N and no-load speed was 0.7 m/s. To produce this performance, the transducer weight and slider size were only 4.2 g and 4 x 4 mm(2).By traveling wave propagation, surface particles of the SAW device move in elliptical motion. Due to the amplitude of the elliptical motion is 10 or 20 nm order, the contact condition of the slider is very critical. To control the contact condition, namely, the elastic deformation of the slider and stator surface in nanometer order, a lot of projections were fabricated on the slider surface. The projection diameter was 20 micro m. In static condition, the elastic deformation and stress were evaluated with the FEM analysis. From this calculation and the simulation result, it is consider that the wave crest is distorted, hence the elasticity has influence on the friction drive condition.Elastic deformation of the stator surface beneath the projection from the initial position were evaluated. In 4 x 4 mm(2) square area, the sliders had from 1089 to 23,409 projections. Depression was independent to the contact pressure. However, the output force depended on the depression although the projection density were different. From the view point of the output power of the motor, the proper depression was independent to the projection density. Around 25 nm depression, the output force and output power were maximized. This depression value was almost same as the vibration displacement amplitude of the stator transducer.     

Propagation of Bleustein-Gulyaev waves in a prestressed layered piezoelectric structure

Based on the theories of nonlinear continuum mechanics, piezoelectricity and elastic waves in solids, theoretical analysis of Bleustein-Gulyaev surface acoustic wave propagation in a prestressed layered piezoelectric structure are described. Numerical calculations are performed for the case that the layer and the substrate are identical LiNbO(3) except that they are polarized in opposite directions. It is found that an almost linear behavior of the relative change in phase velocity versus the initial stress is obtained for both surface electrically free and shorted cases. Potential applications in the design of acoustic wave devices are suggested.     

Grüneisen parameter for HCP iron at extreme compression

The Thomas–Fermi approximation gives the Grüneisen parameter γ=γ_∞=1/2 for all materials at extreme compression (P→∞ or V→0). After re-analyzing the existing experimental data of volume dependence of Grüneisen parameter γ of hexagonal close-packed (HCP) iron, we find that γ=1/2+a(V/V ₀)^1/3+b(V/V ₀) ⁿ , where a, b and n are constants. Based on this new form of γ, the second Grüneisen parameter q, the Debye temperature θ_D and the shear sound velocity v _s of HCP iron are discussed in the present work. It is found that the zero pressure second Grüneisen parameter q ₀=0.654, which is consistent with the previously determined value of HCP iron for Earth's core physics from Dubrovinsky et al. The calculations for the Debye temperature and the shear sound velocity are also found to be in good agreement with the experimental data.     

An Investigation into the Migration of Segments in Crosslinked Fluorinated Polyimide Adhesive

Crosslinked fluorinated polyimides (CFPI) were successfully synthesized to study and explore the effect of cross-linkage on the migration of fluorinated segments and on the adhesion strength. Characterization by dynamic thermomechanical analysis (DMA) and thermo gravimetric analysis (TGA) confirmed good thermal properties of CFPI. X-ray photoelectron spectroscopy (XPS) results showed that the ratio of fluorinated component (6FDA-ODA) concentration of the surface to the bulk decreased with the crosslink density. The water contact angle of CFPI was lower than that of non-crosslinked fluorinated polyimide, indicating that the migration of fluorinated groups to the surface was reduced by the presence of cross-linkage. Therefore, CFPI, with no fluorine segregation on the surface, exhibited excellent wetting of adherent surfaces and adhesion strength, which was proved by lap shear strength (LSS) measurements and scanning electron microscopy.     

Acoustic behaviour and equation of state of amorphous ethylene–vinyl acetate copolymer studied by means of high-pressure Brillouin scattering spectroscopy

The determination of the equation of state (EOS) of amorphous materials is very important for fundamental understanding of the glass transition and applications as well. Simultaneous observation of both longitudinal and transverse acoustic modes by Brillouin scattering spectroscopy has been one of the major methods to obtain EOS of amorphous materials. However, the transverse acoustic mode is hardly seen from some of the amorphous polymers, which makes it difficult to derive EOS. The temperature and pressure dependences of the acoustic properties of amorphous ethylene–vinyl acetate (EVA) copolymer were measured by using high-pressure Brillouin scattering spectroscopy. The temperature variation induced large changes in the frequency shift and linewidth of the longitudinal acoustic mode due to strong coupling between the structural relaxation process and the propagating density fluctuations. The residual linewidth in the glassy state was attributed to the remnant intramolecular motions of EVA, the activation energy of which was estimated to be ～3.30 ± 0.27 kcal/mol. The pressure–density relationship of EVA could be obtained for the first time by measuring the refractive index and using the Lorentz–Lorenz equation. The density and the refractive index exhibited monotonic increase up to approximately 12 GPa. The strong reduction of the acoustic damping at low pressures below ～3 GPa was attributed to the collapsing free volume in EVA. The present study clearly shows that measuring the refractive index by high-pressure Brillouin spectroscopy may be an alternative method to get the EOS of polymeric materials whose transverse acoustic mode is too weak to be observed.     

Nonlinear acoustic waves in a collisional self-gravitating dusty plasma

Using the reductive perturbation method,we investigate the small amplitude nonlinear acoustic wave in a collisional self-gravitating dusty plasma.The result shows that the small amplitude dust acoustic wave can be expressed by a modified Korteweg-de Vries equation,and the nonlinear wave is instable because of the collisions between the neutral gas molecules and the charged particles.     

非线性对大气介质中阵列聚焦声场分布影响的研究

基于时域有限差分算法将大气中近似到二阶微小项的非线性声波波动方程进行离散化,得到了模拟采用的差分波动方程.在此基础上,数值模拟了初始声压强弱不同的5个点声源组成的线阵列垂直或斜向辐射的连续正弦波在大气中传播时二维声场的分布情况.将线性条件下的模拟结果与非线性条件下的模拟结果进行比较后发现:弱非线性会对声场的分布和阵列聚焦增益产生一定的影响,使声场分布波形比线性条件下的声场分布波形更加靠近阵列,聚焦效果变差;强非线性会使波形发生更严重畸变,这是由于产生了基频以外的其他频率声波引起的;非线性对斜向传播时声场分布的影响与垂直传播时的影响效果基本相同,但由于斜向辐射时的声波几何扩展造成的轴向声压衰减要大于垂直辐射时的轴向声压衰减,因此聚焦增益和强非线性的影响都将小于垂直辐射时的情况.