Experimental assessment of a multicarrier underwater acoustic communication system

This paper presents a multicarrier communication system which transmits information on independent subcarriers to achieve an increased data rate. For this system, a passive-phase conjugation (PPC) based receiver structure is assessed by processing data collected in sea trials. Based on temporal diversity (pulse compression) exploited by PPC processing, an adaptive multichannel decision feedback equalizer is used to remove intersymbol interference, where spatial diversity is exploited by adaptive multichannel combination. The digital phase-locked loop (DPLL) technique is implemented for carrier-phase tracking. In the scenario of low input signal-to-noise ratios (SNRs), the receiver structure achieved superior performance using a common DPLL. In a depth-fluctuated environment, two sea experiments were conducted over ranges of 2 km and 4 km, respectively, and this communication system was assessed with a data rate of 4 kbps. In terms of mean square error, output SNR and bit error rate, this receiver structure has demonstrated its performance for the multicarrier communication system.     

Potential solutions to improved sound performance of volume based lightweight multi-storey timber buildings

Lightweight building systems in general suffer from poor sound insulation, especially in the low frequency region. Since no reliable mathematical models that can predict the impact sound pressure level exists, the lightweight building design is to a high extent based upon previous experience and upon measurements. A special difficulty is related to experimental measurements since the variation among identical units must not be neglected. A modern volume based lightweight wooden building concept has here been tested by numerous well controlled measurements, in laboratory as well as in more field like conditions. The volume construction technique offers new possibilities and challenges to improve sound insulation in light weight timber construction. The main purpose was to investigate how different constructional solutions in the floor, like plaster board, mineral wool, elastic glue, dividing board, floating floor etc., affect the sound insulation. Many of the tested modifications resulted in only marginally changed impact sound pressure level but parameters that substantially can improve the sound insulation were found in using elastic glue to mount the floor boards, to install extra board layers and to use floating floors.     

大孔径双向聚能射孔弹的研究

 设计了一种双锥药型罩与双向装药结构相结合的聚能射孔弹模型,通过数值模拟方法研究其射流成型机理,并计算其射流参数。结果显示：双锥药型罩的小锥角部分形成聚能射流,大锥角部分形成翻转弹丸,射流头部和弹丸的速度分别为6 250 m/s和1 620.9 m/s,弹丸长度和平均直径分别为26.1 mm和8.6 mm。结合数值模拟结果,对射流侵彻公式进行了修正,并利用修正公式预测该射孔弹侵彻钢靶的深度,计算结果为69.6 mm。最后,按照该模型进行侵彻实验,实验回收弹丸的长度和平均直径分别为28.1 mm和8.8 mm,侵彻钢靶的深度和孔径分别为70 mm和17 mm。实验表明：数值模拟与理论计算方法相结合是可行的,能够有效地计算射孔弹的射流参数并预测其侵彻深度;该射孔弹侵彻性能优越。     

Effects of the piezoelectric field on the modulation of exciton–polaritons by surface acoustic waves

Surface acoustic waves (SAWs) provide a powerful tool for the modulation of polaritons in GaAs-based microcavities. In this contribution, we compare the modulation introduced by SAWs propagating along piezoelectric and non-piezoelectric crystal directions of the sample surface. Strain calculations reveal that the type-I band-gap modulation induced by the strain field is comparable for both SAW types. Piezoelectric SAWs have, however, an intrinsic longitudinal electric field, which can dissociate quantum well (QW) excitons and, thus, degrade the modulation. Images of the polariton far-field photoluminescence reveal this behavior for different excitation conditions.     

全息声压场的加权范数外推方法

全息声压外推是Patch近场声全息技术的关键步骤.本文提出了全息声压的加权范数外推方法,该方法首先通过实测声压数据的功率谱信息构造频域加权范数,然后通过极小化频域加权范数实现全息声压外推.由于外推过程中同时利用了声压信号的波数域带宽和波数谱形状信息,因此其外推结果优于传统带限外推方法.数值仿真结果表明,该方法无论在外推精度还是计算效率上都明显优于经典的全息声压波数域外推方法.刚性箱体上的声激励固支板声压外推实验进一步验证了该方法的有效性和实用性. 关键词： 近场声全息 全息声压外推 加权范数     

界面条件下线型超声相控阵声场特性研究

开展了界面条件下线型超声相控阵声场特性的研究.将带有楔块的超声相控阵问题合理简化为液固界面的情况进行讨论.根据射线声学理论,计算了单阵元在液固界面存在时的辐射声场,进而推导了聚焦法则,得到了超声线型阵在液固界面存在时的声场、位移场表达式.对安装在楔块上的相控阵换能器的辐射声场进行了仿真,并讨论了聚焦对换能器轴向和横向声场的影响,结果表明利用聚焦能提高分辨率和灵敏度,但聚焦区域之外声束性能更差,在实际检测中要合理利用聚焦. 关键词： 超声相控阵 界面 声场 聚焦     

Measurements of degree of sensitization (DoS) in aluminum alloys using EMAT ultrasound

Sensitization in 5XXX aluminum alloys is an insidious problem characterized by the gradual formation and growth of beta phase (Mg₂Al₃) at grain boundaries, which increases the susceptibility of alloys to intergranular corrosion (IGC) and intergranular stress-corrosion cracking (IGSCC). The degree of sensitization (DoS) is currently quantified by the ASTM G67 Nitric Acid Mass Loss Test, which is destructive and time consuming. A fast, reliable, and non-destructive method for rapid detection and the assessment of the condition of DoS in AA5XXX aluminum alloys in the field is highly desirable. In this paper, we describe a non-destructive method for measurements of DoS in aluminum alloys with an electromagnetic acoustic transducer (EMAT). AA5083 aluminum alloy samples were sensitized at 100 °C with processing times varying from 7 days to 30 days. The DoS of sensitized samples was first quantified with the ASTM 67 test in the laboratory. Both ultrasonic velocity and attenuation in sensitized specimens were then measured using EMAT and the results were correlated with the DoS data. We found that the longitudinal wave velocity was almost a constant, independent of the sensitization, which suggests that the longitudinal wave can be used to determine the sample thickness. The shear wave velocity and especially the shear wave attenuation are sensitive to DoS. Relationships between DoS and the shear velocity, as well as the shear attenuation have been established. Finally, we performed the data mining to evaluate and improve the accuracy in the measurements of DoS in aluminum alloys with EMAT.     

Estimation of anharmonic parameters, molecular radius, Mr and Beyer's non-linearity parameter, B/A in TBnA series

The thermodynamic parameters like Moelwyn-Hughes parameter (C₁), reduced molar volume (V^~), isochoric temperature coefficient of internal pressure (X), Huggin's parameter (F), Gruneisen parameter (Γ_p), isothermal microscopic Gruneisen parameter, Sharma parameter (S_o), fraction free volume (f) and (A^?) a dimensionless thermal parameter, etc and the Beyer's nonlinearity parameter (B/A) were deduced employing the thermal expansion coefficient derived from density data for the homologues series of compounds terephthalyidene-bis-p-n-alkyl anilines, TBnA with n = 5 to 10,12,14,16 and 18. Further, it is found that the variation of molecular radius, M_r increases with the increase of alkyl chain number, with a core radius of 4.78 Å and the increment for methylene unit is 0.086 Å . The results were discussed with the body of the data available.     

Note on the Design Differentiability of the Static Response of Elastic Structures

This paper provides a new proof of design sensitivity of the static response of some typical structures. These structures (beams, plates, and plane elastic solids) have been described previously. A proof of design sensitivity of the inverse state operator was provided there, and design sensitivity of static response was derived. The proof presented here is simpler and self-contained.