基于数字式MEMS传感器的声阵列成像系统设计*

常规驻极体传声器阵列成像系统存在数据采集系统复杂、体积大的问题,因而阵列传感器数量一般不超过60个,成像质量较差。为此,本文以数字式MEMS声传感器基础设计了260个传感器的声阵列,数据采集系统由FPGA控制,并嵌入到前端阵列中,后端是在另一个FPGA控制下的1个DSP芯片和2个PC104模块组成的集成系统,其中高速DSP芯片完成阵列信号处理以实现声成像功能。该系统能够实现对普通车间环境下机械设备噪声、气体泄漏噪声的现场成像测试,形成动态声像图。测试表明,该系统抗干扰能力强、声像分辨率高、成像速度快,实用效果良好。     

润湿剂促进燃煤细颗粒声波团聚脱除的实验研究

在声波团聚室中研究了润湿剂液滴与细颗粒碰撞团聚脱除特性,提出了一种利用润湿剂促进细颗粒在声波场中捕集的新方法。结果表明,不同润湿剂溶液对细颗粒在声波场中的团聚脱除效果存在较大差异,采用JFC和FS-310润湿剂溶液时,细颗粒分级脱除效率与采用水时的分级脱除效率相近。而SDS和Silanol w22溶液,则可有效提高细颗粒在各粒径段的分级脱除效率。细颗粒在声波场中的脱除效率与润湿剂润湿性能具有很好的相关性,随润湿剂对细颗粒相对接触角增大而降低,在声压级为150 dB时,相对接触角由83°降低到0°,细颗粒脱除效率提高了18%,在无声场作用下,脱除效率仅提高了5%。细颗粒脱除效率随声压级的增大而提高,在低声压级条件下,添加润湿剂可有效提高细颗粒脱除效率,声压级在130 dB时,添加SDS溶液液滴后细颗粒脱除效率比声场单独作用时的脱除效率提高了25%。表明添加润湿剂可有效提高细颗粒在声波场中的团聚脱除效率,实现在低声压级条件下,获得高的细颗粒脱除效率。     

计算流管声场的三维有限元数值模型

发展了一种三维有限元数值模型和计算方法来对矩形流管声场进行整体的计算.与以往的二维方法相比,此种数值方法不仅全面反映了矩形流管内声波的传播情况,而且提高了网格精度,从而大大扩展了对铺设有声衬的流管的计算领域.结果表明,该数值模型是有效和准确的,与其它方法和文献的计算结果吻合得非常好.同时,在大大增加计算量的同时,也对程序代码进行了优化工作,提高了计算效率.     

Meshless acoustic analysis using a weakly singular Burton-Miller boundary integral formulation

The Burton-Miller boundary integral formulation is solved by a complex variable boundary element-free method (CVBEFM) for the boundary-only meshless analysis of acoustic problems with arbitrary wavenumbers. To regularize both strongly singular and hypersingular integrals and to avoid the computation of the solid angle and its normal derivative, a weakly singular Burton-Miller formulation is derived by considering the normal derivative of the solid angle and adopting the singularity subtraction procedures. To facilitate the implementation of the CVBEFM and the approximation of gradients of the boundary variables, a stabilized complex variable moving least-square approximation is selected in the meshless discretization procedure. The results show the accuracy and efficiency of the present CVBEFM and reveal that the method can produce satisfactory results for all wavenumbers, even for extremely large wavenumbers such as k = 10 000.     

Stochastic sensitivity analysis of coupled acoustic-structural systems under non-stationary random excitations

This paper presents a new sensitivity analysis method for coupled acoustic–structural systems subjected to non-stationary random excitations. The integral of the response power spectrum density (PSD) of the coupled system is taken as the objective function. The thickness of each structural element is used as a design variable. A time-domain algorithm integrating the pseudo excitation method (PEM), direct differentiation method (DDM) and high precision direct (HPD) integration method is proposed for the sensitivity analysis of the objective function with respect to design variables. Firstly, the PEM is adopted to transform the sensitivity analysis under non-stationary random excitations into the sensitivity analysis under pseudo transient excitations. Then, the sensitivity analysis equation of the coupled system under pseudo transient excitations is derived based on the DDM. Moreover, the HPD integration method is used to efficiently solve the sensitivity analysis equation under pseudo transient excitations in a reduced-order modal space. Numerical examples are presented to demonstrate the validity of the proposed method.     

声表面波技术检测糜烂性毒剂芥子气的研究

声表面波技术是这些年来得到迅猛发展的一门前沿学科,是传感器技术中引人注目的新兴分支。由于声表面波化学传感器具有体积小、成本低、灵敏度高、易于集成化、智能化、实现远距离检测等多种优点,因而在军用、民用领域显示了良好的应用前景[1-3]。芥子气是糜烂性化学毒剂中最为     

Nanoscale detection of faint machinery vibration using the NV center in diamond

We propose a novel method for detection of the faint machinery vibration at the nanometer resolution based on the spin magnetic resonant effect. A suspension magnet acts as a vibration sensor to transfer the vibration signals as the magnetic field fluctuation to excite the spin magnetic resonance. Due to the high sensitivity of the magnetic field of the nitrogen-vacancy center in diamond, the theoretical detection limit of mechanical vibration is as high as 5.7 nm, and the actual measurement resolution reached 12.8 nm, and proved the potential for further improvement to ∼pm resolution. The feasibility of this method is verified by dynamic tests. This method provides a novel approach for the detection of micro-mechanical vibrations.     

水下对转螺旋桨流致辐射噪声机理与预报方法*

水下对转螺旋桨流致辐射噪声的预报对于水下目标的特征提取和分类识别具有重要意义。由桨叶的旋转引起的湍流场是水下对转螺旋桨流致辐射噪声的源场。分述了水下对转螺旋桨湍流边界层脉动、旋转干涉效应和空化效应引发的水动力噪声机制和研究进展,比较了目前工程应用中的3种对转螺旋桨流致辐射噪声预报方法的特点。在分析对转螺旋桨流致辐射噪声数值预报难点的基础上,综述了对转螺旋桨流致辐射噪声计算方法的研究进展,指出间接数值模拟方法是工程中进行对转螺旋桨流致辐射噪声预报的有效方法。     

单颗金刚石切削无氧铜的声发射关联维特征*

声发射技术可以实现无氧铜切削加工特征的监测与评价。采用声发射技术监测单颗金刚石磨粒旋转切削无氧铜,利用G-P算法重构出声发射时域信号相空间,采用自相关函数法计算出相空间时间延迟参数,通过相空间双对数曲线的计算,得到不同切削工况下的关联维数。研究结果表明,进给速度和切削速度对声发射信号影响较不显著,切深与声发射信号振幅呈正效应关系;声发射信号双对数曲线呈现阶段性增加趋势,并逐渐收敛于饱和状态,关联维数随着嵌入维数的增加先快速下降后趋于平稳;金刚石切削无氧铜的声发射信号具有混沌运动变化特性,在较小嵌入维数时,关联维数与切深和切削速度呈现线性负效应关系,与进给速度呈现线性正效应关系。该研究为无氧铜的切削加工提供理论参考。     

椭球粒子声辐射力计算及分析

针对水下椭球粒子,以声散射理论为基础,采用分波序列的方法,建立了椭球粒子声辐射力的理论计算模型。进而根据声辐射力计算公式,以刚性椭球粒子和液体椭球粒子为例,计算并分析不同Bessel波束作用下椭球粒子的轴向声辐射力函数特征。数值仿真计算结果表明,对于刚性椭球粒子,扁平椭球粒子相对于细长椭球粒子更有助于激发负声辐射力;对于液体椭球粒子,细长椭球粒子相对于扁平椭球粒子更加容易产生负声辐射力;对于不同介质的椭球粒子,不同的入射波束激发的负声辐射力的效果也存在明显的差异。该结果为复杂的尺寸和介质粒子声操控技术提供了理论的可行性。