基于单透镜的空间光-单模光纤耦合方法

将自由空间光耦合进单模光纤产生超连续谱的实验中,空间光与单模光纤的耦合效率是其中的一个关键问题。常采用的单透镜或显微物镜进行耦合存在耦合效率低、调整难度大、端面易损伤等问题。提出了先将自由空间的光耦合进纤芯尺寸较大的单模光纤,然后将纤芯较大的单模光纤和纤芯较小的单模光纤进行熔接。实验结果表明,改进的耦合系统耦合效率大大提高,达到60％以上,且调整难度降低,光纤端面的损伤概率降低,大大提高了超连续谱产生的效率。     

大口径光学非球面轮廓测量过程可视化研究

研究了大口径非球面光学元件表面轮廓测量过程可视化,并设计、开发了基于双向链接边表的软件系统。提出一种改进的双向链接边表数据结构完成三维模型加载方法,建立数据结构及其相关图形元作为软件的基础层。计算非球面曲面方程获得表面轮廓的数据生成图形场景节点,并自动生成曲面测量轨迹。在非接触检测平台上进行测试,对测量数据进行平滑处理,拟合出测量获得的非球面面形,完成面形精度和表面粗糙度的评价。实验结果表明,该可视化系统技术路线正确高效、稳定性好,为非球面检测数据及其综合分析仿真提供直观的可视化平台。     

采用大口径投影光学系统监测远场散斑特征参数

大口径投影光学系统采用低成本、大口径菲涅耳透镜制作,可将远场散斑强度分布投影到CCD成像探测器上。通过CCD图像处理,能够对给定孔径上的接收功率、闪烁指数进行量化评估;在接收孔径足够大、保障散斑不会因为光束漂移效应而脱离菲涅耳透镜的条件下,该系统还可以对光束漂移和特征半径进行量化评估。同时讨论了CCD像元响应非均匀性误差及其影响、CCD辐照响应函数和图像几何投影系数的定标方法。实验表明,系统能够对激光大气传输过程中的远场散斑特征参数进行监测。特别对自由空间激光通信系统而言,可以为大气衰减和多种大气湍流效应综合作用下的中值电平慢衰落研究和检测阈值优化设计提供实验数据支撑。     

2D-C/SiC拉伸损伤的声发射信号聚类分析

对2D-C/SiC复合材料进行常温拉伸试验,利用声发射(AE)仪在线监测其损伤过程.应用K-均值聚类算法对AE信号进行模式识别,结合扫描电镜观察,发现2IC/SiC复合材料拉伸过程的损伤模式包括基体开裂、界面层脱粘、层间剥离、纤维断裂以及纤维束断裂等,并得到了各种损伤模式AE信号参数的中心值.通过对不同损伤模式AE累积事件数和累积能量随时间变化的统计分析,描述了2DC/SiC复合材料拉伸损伤演化过程.     

Application of Two Novel Acoustic Emission Parameters on Identifying the Instability of Granite

The issue of monitoring and early warning of rock instability has received increasing critical attention in the study of rock engineering. To investigate the damage evolution process of granite under triaxial compression tests, acoustic emission (AE) tests were performed simultaneously. This study firstly introduced two novel parameters, i.e., the coefficient of variation (CoV) of the information entropy and correlation dimension of the amplitude data from the AE tests, to identify the precursor of the failure of granite. Then the relationship between the changes in these parameters and the stress-time curve was compared and analyzed. The results of this study show that: (1) There is a strong correlation between the CoV of the information entropy and the failure process of granite. The granite failed when the CoV curve raised to a plateau, which could be used as an indicator of rock instability. (2) The fluctuation of the correlation dimension indicates the different stages during the loading process, i.e., the initial compaction stage, the linear elastic stage, the yield stage, and the failure stage. Each stage contains a descending and a rising process in the correlation dimension curve, and the exhibited starting point or the bottom point at the correlation dimension curve could be selected as the indicator point for the rock instability. (3) The combined analysis of the Information entropy and Correlation dimension can improve the accuracy of rock instability prediction. This study provides new insights into the prediction of rock instability, which has theoretical implications for the stability of subsurface engineering rock masses.     

利用“神光-Ⅱ”激光装置多路光束叠加直接驱动下的冲击波平面性及稳定性

利用“神光-Ⅱ”的3路基频光输出及小透镜列阵束匀滑技术,通过优化设计和合理地选择光路组合,实现了多路叠加斜入射的驱动激光, 在靶材料中产生一个650~750μm范围内平面性良好的冲击波,有效地提高了“神光-Ⅱ”输出光束的利用率。同时,利用斜面靶进行的冲击稳定性实验表明,在靶面功率密度分别为3.26×1014及2.56×1014W/cm2时,冲击波至少在28.38~55.82和22.13~35.07μm的Al样品厚度内是稳定传播的。     

大面阵激光二极管阵列端面泵浦耦合技术

为了满足常温Yb:YAG激光放大器对泵浦功率密度的要求,设计了一种高缩束比的耦合系统。根据激光二极管（LD）的发光特性,将输出功率为80 kW的LD阵列进行拟球面排列,采用正交柱面透镜配合空心导光管进行泵浦耦合,耦合系统的面积缩束比高达86∶1。模拟计算表明,该耦合系统的耦合效率对导光管反射板的反射率依赖性较低,且脱离耦合系统后的泵浦光传输8.5 mm后,依然可以保持泵浦光场的轮廓,满足端面泵浦的常温Yb:YAG片状放大器对泵浦耦合系统的要求。     

基于反射体布拉格光栅谱组束的设计

针对反射体布拉格光栅谱组束中缺乏精密控制仪器的实验条件,采用透镜作为光束入射角和准直控制器件,设计了一种结构简单的谱组束系统。基于衍射效率方程,得到了光栅最佳设计参数;基于像差理论,得到了透镜最佳设计参数。针对该设计系统,对影响组束效果的因素进行了分析,并对组束效果进行了预测。结果表明：当激光束的谱宽小于1.5 nm时,设计系统的组束效率能超过90%;而当光束的谱宽达到2.1 nm时,设计系统也能获得超过88.7%的组束效率。     

润湿剂促进燃煤细颗粒声波团聚脱除的实验研究

在声波团聚室中研究了润湿剂液滴与细颗粒碰撞团聚脱除特性,提出了一种利用润湿剂促进细颗粒在声波场中捕集的新方法。结果表明,不同润湿剂溶液对细颗粒在声波场中的团聚脱除效果存在较大差异,采用JFC和FS-310润湿剂溶液时,细颗粒分级脱除效率与采用水时的分级脱除效率相近。而SDS和Silanol w22溶液,则可有效提高细颗粒在各粒径段的分级脱除效率。细颗粒在声波场中的脱除效率与润湿剂润湿性能具有很好的相关性,随润湿剂对细颗粒相对接触角增大而降低,在声压级为150 dB时,相对接触角由83°降低到0°,细颗粒脱除效率提高了18%,在无声场作用下,脱除效率仅提高了5%。细颗粒脱除效率随声压级的增大而提高,在低声压级条件下,添加润湿剂可有效提高细颗粒脱除效率,声压级在130 dB时,添加SDS溶液液滴后细颗粒脱除效率比声场单独作用时的脱除效率提高了25%。表明添加润湿剂可有效提高细颗粒在声波场中的团聚脱除效率,实现在低声压级条件下,获得高的细颗粒脱除效率。     

Photoreversibility and Biocompatibility of Polydimethylsiloxane‐Coumarin as Adjustable Intraocular Lens Material

Polydimethylsiloxane (PDMS) constitutes an interesting material for a variety of biomedical applications, especially as intraocular lenses (IOLs), for its excellent transparency. In this work, a photoreversible PDMS‐coumarin network, whose shape and properties can be adjusted postoperatively in a noninvasive manner, is developed. The synthesis of PDMS‐coumarin is achieved by amidation of a coumarin acid chloride derivative with amine‐functionalized PDMSs. Under exposure of λ > 300 nm, these polymers can be cured by dimerization of coumarin. The cured polymers can be uncrosslinked via photocleavage of cyclobutane dimers upon illumination at λ < 290 nm. The diffusion of linear PDMSs in a crosslinked network and the controlled shape modification are studied, which demonstrate that these polymers are good candidates for adjustable IOL application. IOL disks prepared from these materials show high hydrophobicity and good transparency. In vitro cytotoxicity, lens epithelial cell adhesion assays, and rabbit host reaction against implanted disks demonstrate the biocompatibility of the polymer.