整体X光透镜性能实验研究

利用高计数率探测器和低功率光源,在大的能量范围内,同时测量了整体X光透镜的传输效率和焦斑直径与能量的关系。实验结果表明：透镜的焦斑直径随着能量的升高而减小;对04-5-10-5透镜而言,在高于5．8keV的能量范围内,透镜的传输效率随着能量的升高而降低,在低于5．8keV的能量范围内,透镜的传输效率随着能量的升高而增加。通过测量不同能量的X射线在透镜会聚光束中的空间分布,研究了短出口焦距透镜的光晕现象,光晕会导致透镜焦斑直径增大和传输效率测量值的增加。利用轴向扫描法研究了整体X光透镜出口焦距和能量的关系,实验结果表明：会聚透镜的出口焦距随着X射线能量的升高而增加。     

固体浸没透镜飞行高度的气浮控制

采用固体浸没透镜的光存储方法是提高光存储密度的比较实用的近场光存储方法,而严格控制SIL下底面与光存储介质之间的亚波长级距离是此光存储系统正常工作的前提.本文采用电容法测量SIL的飞行高度,采用弹性悬臂将SIL加载在转盘表面上,转盘以不同速度转动时SIL将悬浮在不同的高度.计算机首先采集到SIL的飞行高度信息,再与设定的飞行高度作比较,根据比较结果调整转盘转速,从而达到调整SIL飞行高度的目的.采用此方法,可以动态地将SIL的下底面控制在距高速转动的转盘表面上150～600 nm范围内的一定高度上.     

自聚焦透镜的傅里叶变换性质及成像性质

对自聚焦透镜的二维傅里叶变换性质,成像性质以及脉冲响应作了系统论述.并从理论上对自行研制的自聚焦透镜的光斑尺寸进行了计算.在不考虑像差的情况下,直径为1.8 mm的透镜其出射光斑直径为1.2 μm,利用狭缝扫描法进行了实际测量,测量值为1.5 μm,理论值与实验值基本吻合,从而说明理论分析的合理性.     

红外热成像鱼眼镜头设计中若干特殊问题的处理

提出鱼眼镜头光阑球差的级数表达式及其基于有限差分的近似计算方法,解决了通常的光阑倒追方法面临的难题;讨论孔径光阑与入瞳的特殊"共轭"关系,分析了光阑彗差和像差渐晕;运用Aitkin插值技术填补"溢出"光线在像面上的落点,以保证像质函数定义的一致性,维持自动优化持续进展,从而克服频繁的光线"溢出"造成的严重困难;提出充分利用像差渐晕改善像面照度均匀性的方法;论述标定轴外光束边界的逐次渐近过程和运用入瞳距离变量实现孔径光阑位置全域优化的技术.     

Investigation of scattering of elastic waves by cylinders in 1-3 piezocomposites

The scattering behavior of P-waves in piezoelectric composites with 1–3 connectivity is studied. The method of wave function expansion is adopted for the theoretical derivations. Analytical expressions are obtained for the distributions of mechanical displacement in z-direction along the circumferences of piezoelectric cylinders. These solutions are used to study the influence of each element of the stiffness matrix and the piezoelectric matrix on the various resonant modes of vibration. Numerical results obtained indicate that perturbations of the elements c₄₄ and e₁₅ significantly affect resonant frequencies and amplitudes, perturbations of c₁₁ and c₁₂ have pronounced effects on resonant modes of high frequencies also. However, the resonant modes are not so sensitive to the perturbations of c₁₃, e₃₁ and e₃₃. The dynamic characteristics of 1–3 connectivity piezoelectric composites exposed here are meaningful for the design and manufacture of sensor/actuator elements by this kind of composites as well as the on-line health monitoring of the mechanical properties variations of the composites itself.     

Travel Time Tomography

We survey some results on travel time tomography. The question is whether we can determine the anisotropic index of refraction of a medium by measuring the travel times of waves going through the medium. This can be recast as geometry problems, the boundary rigidity problem and the lens rigidity problem. The boundary rigidity problem is whether we can determine a Riemannian metric of a compact Riemannian manifold with boundary by measuring the distance function between boundary points. The lens rigidity problem problem is to determine a Riemannian metric of a Riemannian manifold with boundary by measuring for every point and direction of entrance of a geodesic the point of exit and direction of exit and its length. The linearization of these two problems is tensor tomography. The question is whether one can determine a symmetric two-tensor from its integrals along geodesics. We emphasize recent results on boundary and lens rigidity and in tensor tomography in the partial data case, with further applications.     

Design and fabrication of fluid controlled dynamic optical lens system

A novel small fluid controlled optical lens system that is capable of displaying dynamic variation of its focal length and field-of-view (FOV) is designed and fabricated. In this active lens system, appropriate volume of the optical fluid can be pumped into or out of the lens chamber to provide double-convex (DCX) or double-concave (DCV) lens effect. Simple optical imaging experiments were performed using different sets of glass lenses with fixed focal lengths to determine the optimum lens configuration required for designing a dynamic optical lens system. The experimental results obtained from the glass lenses demonstrate that a combination of a single DCX lens with three DCV lenses provides a wider FOV. The flexible membranes for fluid controlled lenses were fabricated using polydimethylsiloxane polymer material, which has good optical transparency and elasticity. A simple fluid injection system is used to vary the radius of curvature of the lenses, and thereby to change the focal length. A dynamic optical lens system with a combination of one DCX and multiple variable focal length DCV lenses as designed here can image an object with a wide range of focal length and FOV. With this fluid controlled optical system, the FOV and focal length could be continuously varied and a maximum FOV of 118.3° could be achieved. The smallest f-number (f_/#) for this fluid controlled single lens system was found to be 1.3, which corresponds to the numerical aperture value of 0.35.     

二维解卷积波束形成水下高分辨三维声成像

针对水下三维成像的空间分辨率难以提高,且具有较高旁瓣级的问题,提出了一种二维解卷积波束形成高分辨三维声成像算法,该算法首先完成任意距离切片的平面阵波束形成,近场情况下采用菲涅尔近似实现近场平面阵波束形成,然后通过二维解卷积技术对任意距离切片的二维波束形成结果进行解卷积处理,去除阵列指向性函数的影响,改善波束响应非理想冲击函数所造成波束形成主瓣宽及旁瓣级高的问题。通过计算机仿真分析,新算法可以有效的提高水下三维成像的空间分辨率,抑制旁瓣级,并能够在较宽频带和不同阵列孔径内保持与常规波束形成相当的稳定性。通过试验研究,新方法比常规波束形成实际目标成像分辨率提高一倍,最高旁瓣级下降20 dB,验证了该算法在实际系统中的有效性.     

多层介质中超声相控阵声场仿真*

由于良好的声束偏转与聚焦特性,超声相控阵已经广泛应用于多层固体介质的缺陷检测。当超声束经过多层介质时,由于反射、透射以及模式转换的存在,多种声束存在于这种结构中,使得声场分析变得复杂。为了提高多层介质检测的准确性,有必要对超声声场的分布规律进行深入地了解。该文结合高斯声束等效点源模型以及射线追踪法,给出了相控阵声源在多层固体介质中激发声场的仿真方法,并且模拟计算了一维线型相控阵在楔块-铝-黄铜-钢四层固体介质中的辐射声场。通过对不同延时法则的计算,实现了声波在这种复杂介质中的偏转与聚焦,进而研究了不同焦点处聚焦声场的分布。结果表明:相控阵方法能使聚焦点处的声场幅值增大,能量集中,提高了检测分辨率;不同聚焦点处声场聚焦效果不同,实际检测时应根据检测区域结构及位置特点,合理放置相控阵换能器。与瑞利积分法的比较表明,该文的仿真方法适用于多层介质相控阵声场的计算。