利用远场模式反演声波阻尼系数

1．引言声波反散射理论在二十世纪的数学物理领域占有重要的地位,在这方面已有大量的研究工作,而对声波反散射理论的研究,大量的研究才是近十多年的事＞51．由于声波反散射理论在雷达、声纳及地球物理勘探等领域的迫切需要,对反散射理论及计算方法的研究有着广泛的应用前景．本文研究时间调和声波的反散射问题,利用散射波的远场模式（farfieldPattern）反演边界条件中的阻尼系数．考虑在均匀介质中传播的声波,此声波碰到一个无限长的柱体．设柱体的截面DCRZ,母线平行于。轴,设人射波为平面波。如）二exphkx·叫,其中k为波数,a为…     

混凝土中的声发射波速特性及其在源定位中的应用

利用声发射技术监测受载混凝土裂缝发展特征的首要任务是对声发射源的准确定位.为了解混凝土中声发射波速特性,提高声发射源定位精度,该文开展了一系列室内试验,构建了考虑衰减现象的声发射波速修正模型,优化建立了基于修正波速的区域穷举定位法.结果表明:水灰比越小,基准波速越大,波速随距离的衰减越大.骨料粒径越大,基准波速越大,波...     

Surface Acoustic Wave Characterization of Equivalent Young's Moduli for Patterned Films北大核心CSCD

Based on the equivalent elasticity theory for layered materials, the micro-mechanics equivalent models for single and dual damascene structures were established. The equivalent elastic constant of the patterned structure was introduced, to establish the propagation model for the surface acoustic waves propagating in the layered structure of the patterned film/ substrate, and the theoretical dispersion curves of the surface acoustic waves were calculated with Green’s function and the matrix method. The finite element method was used to calculate 24 numerical examples of damascene structures with different volume ratios, and the results were compared with those of the strain energy method. The results show that, the average relative errors of the equivalent Young’s moduli of the 300 nm-thick dual damascene film and the 100 nm-thick single damascene film are 2.06% and 2.27%, respectively. The research verifies the correctness of the equivalent patterned structure model and the feasibility of the surface acoustic wave method to characterize the mechanical properties of patterned films, and provides a reference for the development of suitable chemico-mechanical polishing technologies for patterned films under low pressure. © 2023 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

Nebulization of siRNA for inhalation therapy based on a microfluidic surface acoustic wave platform

The local delivery of therapeutic small interfering RNA or siRNA to the lungs has the potential to improve the prognosis for patients suffering debilitating lung diseases. Recent advances in materials science have been aimed at addressing delivery challenges including biodistribution, bioavailability and cell internalization, but an equally important challenge to overcome is the development of an inhalation device that can deliver the siRNA effectively to the lung, without degrading the therapeutic itself. Here, we report the nebulization of siRNA, either naked siRNA or complexed with polyethyleneimine (PEI) or a commercial transfection agent, using a miniaturizable acoustomicrofluidic nebulization device. The siRNA solution could be nebulised without significant degradation into an aerosol mist with tunable mean aerodynamic diameters of approximately 3 µm, which is appropriate for deep lung deposition via inhalation. The nebulized siRNA was tested for its stability, as well as its toxicity and gene silencing properties using the mammalian lung carcinoma cell line A549, which demonstrated that the gene silencing capability of siRNA is retained after nebulization. This highlights the potential application of the acoustomicrofluidic device for the delivery of efficacious siRNA via inhalation, either for systemic delivery via the alveolar epithelium or local therapeutic delivery to the lung.     

基于扩频码的单载波迭代频域均衡水声通信

单载波时域均衡在长时延扩展水声信道中计算量大,并对接收机参数的选择较为敏感,可靠性低,而正交频分复用信号峰均功率比高、对频率偏移敏感. 针对这些问题,提出基于扩频码的单载波块传输高速率水声通信方法和基于T/4分数间隔迭代频域均衡的接收机算法. 该接收机利用已知扩频码进行信道估计以及对由多普勒偏移引起的旋转相位进行估计,并通过一种低复杂度迭代频域均衡算法改善系统性能. 开展了湖上实验研究,结果表明在浅水1.8 km距离且复杂多径干扰条件下,利用BPSK/QPSK调制可实现10^-2–10^-4的误码率并达到1500–3000 bit/s的有效数据率. 关键词： 水声通信 单载波 频域均衡 迭代处理     

Dressed ion acoustic solitary waves in quantum plasmas with two polarity ions and relativistic electron beams

A theory for dressed quantum ion acoustic waves (QIAWs), which includes higher-order corrections when QIAWs are investigated by the reductive perturbation method, is presented for unmagnetized plasmas containing positive and negative ions and weakly relativistic electron beams. The properties of the QIAWs are investigated using a quantum hydrodynamic model, from which a Korteweg–de Vries equation is derived using the reductive perturbation method. An equation including higher-order dispersion and nonlinearity corrections is also derived, and the physical parameter space is discussed for the importance of these corrections.     

超声波作用下泡群的共振声响应

从球状泡群气泡动力学方程出发, 考虑泡群间次级声辐射的影响, 得到了声场中两泡群共同存在时气泡振动的动力学方程, 并以此为基础探讨声波驱动下双泡群振动系统的共振响应特征. 由于泡群间气泡间的相互作用, 系统存在低频共振和高频共振现象, 两不同共振频率的数值与泡群内气泡的本征频率相关. 泡群内气泡的本征频率又受到初始半径、泡群大小和泡群内气泡数量的影响. 气泡自由振动和驱动声波的耦合激起泡群内气泡的受迫振动, 气泡初始半径、气泡数密度和驱动声波频率等都会影响泡群内气泡的振动幅值和初相位. 关键词： 气泡群 共振 声响应 超声空化     

椭球粒子声辐射力计算及分析

针对水下椭球粒子,以声散射理论为基础,采用分波序列的方法,建立了椭球粒子声辐射力的理论计算模型。进而根据声辐射力计算公式,以刚性椭球粒子和液体椭球粒子为例,计算并分析不同Bessel波束作用下椭球粒子的轴向声辐射力函数特征。数值仿真计算结果表明,对于刚性椭球粒子,扁平椭球粒子相对于细长椭球粒子更有助于激发负声辐射力;对于液体椭球粒子,细长椭球粒子相对于扁平椭球粒子更加容易产生负声辐射力;对于不同介质的椭球粒子,不同的入射波束激发的负声辐射力的效果也存在明显的差异。该结果为复杂的尺寸和介质粒子声操控技术提供了理论的可行性。     

Elastic friction drive of surface acoustic wave motor

Importance of elastic deformation control to obtain large output force with a surface acoustic wave (SAW) motor is discussed in this paper. By adding pre-load to slider, stator and slider surfaces are deformed in a few tens nanometer. Appropriate deformation in normal direction against normal vibration displacement amplitude of SAW existed. By moderate deformation, the output force of the SAW motor was enlarged up to about 10 N and no-load speed was 0.7 m/s. To produce this performance, the transducer weight and slider size were only 4.2 g and 4 x 4 mm(2).By traveling wave propagation, surface particles of the SAW device move in elliptical motion. Due to the amplitude of the elliptical motion is 10 or 20 nm order, the contact condition of the slider is very critical. To control the contact condition, namely, the elastic deformation of the slider and stator surface in nanometer order, a lot of projections were fabricated on the slider surface. The projection diameter was 20 micro m. In static condition, the elastic deformation and stress were evaluated with the FEM analysis. From this calculation and the simulation result, it is consider that the wave crest is distorted, hence the elasticity has influence on the friction drive condition.Elastic deformation of the stator surface beneath the projection from the initial position were evaluated. In 4 x 4 mm(2) square area, the sliders had from 1089 to 23,409 projections. Depression was independent to the contact pressure. However, the output force depended on the depression although the projection density were different. From the view point of the output power of the motor, the proper depression was independent to the projection density. Around 25 nm depression, the output force and output power were maximized. This depression value was almost same as the vibration displacement amplitude of the stator transducer.     

Propagation of Bleustein-Gulyaev waves in a prestressed layered piezoelectric structure

Based on the theories of nonlinear continuum mechanics, piezoelectricity and elastic waves in solids, theoretical analysis of Bleustein-Gulyaev surface acoustic wave propagation in a prestressed layered piezoelectric structure are described. Numerical calculations are performed for the case that the layer and the substrate are identical LiNbO(3) except that they are polarized in opposite directions. It is found that an almost linear behavior of the relative change in phase velocity versus the initial stress is obtained for both surface electrically free and shorted cases. Potential applications in the design of acoustic wave devices are suggested.