Effects of the piezoelectric field on the modulation of exciton–polaritons by surface acoustic waves

Surface acoustic waves (SAWs) provide a powerful tool for the modulation of polaritons in GaAs-based microcavities. In this contribution, we compare the modulation introduced by SAWs propagating along piezoelectric and non-piezoelectric crystal directions of the sample surface. Strain calculations reveal that the type-I band-gap modulation induced by the strain field is comparable for both SAW types. Piezoelectric SAWs have, however, an intrinsic longitudinal electric field, which can dissociate quantum well (QW) excitons and, thus, degrade the modulation. Images of the polariton far-field photoluminescence reveal this behavior for different excitation conditions.     

超声波波型转换与表面波的检测

分析了超声波纵波、横波、表面波3种波型的产生条件和声速关系,检测了超声波在固体表面的波型转换,并测量了声表面波的速度,讨论了声表面波在超声延迟线方面的应用.     

基于集合卡尔曼变换的东中国海声学 敏感区判定方法*

为改善海洋与水声环境预报质量,针对常规观测成本高、资料利用率低等问题,将适应性观测方法应用于海洋声学领域。结合海洋-声学耦合模式与集合卡尔曼转换敏感区诊断方法,以东中国海宫古海峡北部区域为验证区,计算并分析不同条件下海洋环境敏感区与声学敏感区分布,通过观测系统模拟试验验证适应性观测对验证区预报的提升效果。结果表明,两种敏感区位置随时间间隔增加均向验证区上游移动,海洋环境敏感区相比于声学敏感区分布更为集中,且平移特征更明显;对海洋环境敏感区和声学敏感区添加适应性观测均能提升海洋与水声环境的预报质量,提升效果随时间间隔增加而减小,在某种类型敏感区的适应性观测对相对应参数的预报质量提升效果优于对其他类型敏感区进行观测的效果。     

基于超声波干涉的峰谷法计算声速值及实验误差探讨

介绍了基于Cassy Lab软件下的超声波干涉实验,提出了利用超声波干涉现象测量声速的方法.根据干涉理论推导了峰谷法测量声速的计算公式.分析和探讨了峰谷法计算声速的误差来源和改进方法.     

Acoustic dipole radiation model for magnetoacoustic tomography with magnetic induction

An acoustic dipole radiation model for magnetoacoustic tomography with magnetic induction (MAT-MI) is pro-posed,based on the analyses of one-dimensional tissue vibration,three-dimensional acoustic dipole radiation and acoustic waveform detection with a planar piston transducer.The collected waveforms provide information about the conductiv-ity boundaries in various vibration intensities and phases due to the acoustic dipole radiation pattern.Combined with the simplified back projection algorithm,the conductivity configuration of the measured layer in terms of shape and size can be reconstructed with obvious border stripes.The numerical simulation is performed for a two-layer cylindrical phantom model and it is also verified by the experimental results of MAT-MI for a tissue-like sample phantom.The proposed model suggests a potential application of conductivity differentiation and provides a universal basis for the further study of conductivity reconstruction for MAT-MI.     

主振荡功率放大装置中的放大自发辐射效应和能量提取效率

 建立了放大自发辐射(ASE)和相干激光能流耦合的模型,使用迭代算法,计算了长方体形状放大级中的ASE能流和相干激光能流的分布以及放大级出口0.5 m处的ASE分布,并讨论了入射光强、饱和光强对输出功率及能量提取效率的影响。对于增益区呈长方体、增益系数沿流场方向呈抛物线分布的放大级的计算结果表明：输入光的存在不仅会降低放大级中ASE光强的大小,而且将改变ASE的分布,使放大级中ASE能流的极大值向入口处移动;在饱和光强一定的情况下,输出功率和能量提取效率将随着入射功率的增大而增大;在入射光强一定的情况下,输出功率将随着饱和光强的增大而增大,而能量提取效率将随着饱和光强的增大而减小。     

变延迟进动定制激发(DANTE)序列在工程中的优化设计

变延迟进动定制激发（Delays Alternating with Nutation for Tailored Excitation,DANTE）序列作为一种黑血预脉冲序列,通过连续施加小角度激发脉冲,以及结合散相梯度,使得流动物质和静态物质达到不同的稳态,从而抑制流动的血液.对于静态物质而言,施加DANTE序列后在图像等间隔的位置会出现暗条纹,暗条纹的宽度与梯度幅值和小单元持续时间乘积相关：乘积越大,暗纹宽度越小.对于动态物质而言,为达到较好的抑制效果,需要增加整个DANTE序列模块的准备时间,并且增大梯度幅值和小单元持续时间的乘积.因此,该方法对于梯度系统的要求较高,而实际梯度放大器（Gradient Amplifier,GPA）有一定的限额.在有限的GPA条件下,为使得DANTE序列具有更好抑制流动信号效果,本文在读出方向以及片层旋转两个方面进行了梯度优化,实现了更好的黑血效果.     

Stable multiwavelength and passively mode-locked Yb-doped fiber laser based on nonlinear polarization rotation

Based on the nonlinear polarization rotation (NPR) technique and a fiber Mach–Zehnder interferometer (MZI), a fiber laser which can work in two different modes has been demonstrated. In one mode, it works as a continuous wave (CW) multiwavelength laser, and stable dual-, triple- and tetra-wavelength lasing with the wavelength spacing of 1.1 nm are obtained. In the other mode, it works as a passively mode-locked fiber laser, and the generated pulses have a repetition rate of 10.6 MHz, an FWHM width of 800 ps and the largest energy of 1 nJ. The multi-functional property makes this fiber laser a very convenient, cost effective and multi-purpose laser source.     

掺铒聚合物狭缝波导放大器的增益特性研究

设计了一种高浓度稀土铒掺杂聚合物填充硅狭缝结构的平面光波导放大器（工作波长1 550 nm,泵浦波长1 480 nm）,能够在低泵浦下获得高增益,可以应用于硅基光互联的损耗补偿。通过扫描电镜照片观察发现,合成的铒掺杂聚合物材料具有良好的纳米狭缝填充能力。考虑铒离子的合作上转换和激发态吸收,利用铒离子四能级跃迁模型,建立原子速率方程和光功率传输方程,数值仿真分析了聚合物光学性质、狭缝波导结构参数及信号光泵浦光功率等放大器增益特性的影响因素。这种具有纳米截面尺寸的光波导放大器,获得4.5 dB的信号光相对增益仅需要1.5 mW的泵浦光,展现了良好的集成光学应用前景。为了进一步提高增益,引入了多层狭缝结构,四层狭缝波导的重叠积分因子比一层狭缝的高42%。     

50W功率放大器的研制

介绍了一种L波段50W功率放大器的研制情况,采用功率合成技术获得了61W的输出功率,放大器增益大于40dB。给出了1W功放、10W功放和八路功率分配器的设计分析过程。