SYNTHESIS OF MESOPOROUS POLY(STYRENE-co-MALEIC ANHYDRIDE)/SILICA HYBRID MATERIALS VIA A NONSURFACTANT-TEMPLATED SOL-GEL PROCESS*

Mesoporous poly (styrene-co-maleic anhydride)/silica hybrid materials have been prepared. The synthesis wasachieved by the HCl-catalyzed sol-gel reactions of tetraethyl orthosilicate (TEOS) and styrene-maleic anhydride copolymerin the presence of 3-aminopropyl triethoxysilane (APTES) as a coupling agent and citric acid as a nonsurfactant template orpore-forming agent, followed by ethanol extraction. Characterization results from nitrogen sorption isotherms and powder X-ray diffraction indicate that polymer-modified mesoporous materials with large specific surface areas (e.g. 900 m~2/g) andpore volumes (e.g. 0.6 cm~3/g) could be prepared. As the citric acid concentration is increased, the specific surface areas, porevolumes and pore diameters of the hybrid materials increase.     

Five new derivatives of nonactic and homo-nonactic acids from Streptomyces globisporus

In addition to the known compounds of the type of nonactic and homononactic acids and their lactones, dilactones and tetralactones, five new compounds, namely homononactyl-nonactoate, a dilactone consisting of nonactic and homononactic acids and three cyclic trimers with nonactic and homononactic acids, were isolated from a strain of Streptomyces globisporus. Their structures, including the absolute configurations of the hydroxyl and methyl groups, were determined by extensive spectroscopic techniques such as UV, IR, MS, 1D and 2D NMR.     

A Rapid and Convenient Synthesis of Derivatives of Imidazoles under Microwave Irradiation

An efficient and a quick microwave‐assisted synthesis of benzimidazoles and trisubstituted imidazoles was developed. Three benzimidazoles were obtained as a result of the condensation of 1,2‐phenylenediamine with carboxylic acids and acetoacetic ester without catalyst. A series of trisubstituted imidazoles were synthesized by condensation of benzil, aromatic aldehyde and ammonium acetate in the presence of glacial acetic acid.     

An optical surface plasmon resonance biosensor for determination of tetanus toxin

Surface plasmon resonance (SPR) has been successfully applied for the simple, rapid, and label-free assay of various biomolecules. This assay evaluates a novel wavelength modulation SPR biosensor for the detection of tetanus toxin. The wavelength modulation SPR biosensor is designed based on fixing the incident angle of light and measuring the reflected intensities in the resonance wavelength range spanning 400-800 nm simultaneously. Tetanus toxin (TeNT), one of the most potent toxins known, is synthesized as a 150 kDa single polypeptide chain. The SPR biosensor has been shown to be capable of directly detecting concentration of tetanus toxin as low as 0.028 Lf ml⁻¹. Under selected experimental conditions, the SPR biosensor has a good reproducibility, sensitivity and reversibility. The results illustrate how wavelength modulation SPR biosensor can be used to detect biomolecular interactions.     

Ascorbate oxidase

Ascorbate oxidase fromCucurbita sp. was isolated by ammonium sulfate precipitation and DEAE-dextran-silochrome column chromatography. The thermal and pH stabilities of the purified enzyme were investigated. TheK _M forl-ascorbic acid (1.5 mM) and chlorohydroquinone (0.37 mM) was determined. Substrate specificity of ascorbate oxidase was investigated and compared with those of laccases fromCoriolus hirsutus andCerrena maxima. Ascorbate oxidase was covalently bound to a polymeric membrane and used in an enzyme electrode for ascorbic acid.     

Clinical applications of chemiluminescence

This article reviews the clinical applications of chemiluminescence in routine testing and surveys the diverse applications of chemiluminescence in clinical research. In routine clinical testing, chemiluminescent labels (acridinium ester, acridinium sulfonamide) and detection reactions for peroxidase and alkaline phosphatase enzyme labels (luminol and adamantyl 1,2-dioxetane-based reactions, respectively) are widely used in immunoassay and nucleic acid probe assays (e.g. hybridization protection assay, Hybrid Capture^® assay). In clinical research the sensitivity, dynamic range and diversity of chemiluminescent assays has led to a vast range of applications, notably in protein and nucleic acid blotting, microarray-based assays, monitoring reactive oxygen species, and as detection reactions for substances separated by HPLC, capillary electrophoresis (CE), and flow-injection analysis.     

A Branched Pore Model Analysis for the Adsorption of Acid Dyes on Activated Carbon

A new branched-pore adsorption model has been developed using an external mass transfer coefficient, K _f, an effective diffusivity, D _eff, a lumped micropore diffusion rate parameter, K _b, and the fraction of macropores, f, to describe sorption kinetic data from initial adsorbent-adsorbate contact to the long-term adsorption phase. This model has been applied to an environmental pollution problem—the removal of two dyes, Acid Blue 80 (AB80) and Acid Red 114 (AR114), by sorption on activated carbon. A computer program has been used to generate theoretical concentration-time curves and the four mass transfer kinetic parameters adjusted so that the model achieves a close fit to the experimental data. The best fit values of the parameters have been determined for different initial dye concentrations and carbon masses. Since the model is specifically applicable to fixed constant values of these four parameters, a further and key application of this project is to see if single constant values of these parameters can be used to describe all the experimental concentration-time decay curves for one dye-carbon system.The error analysis and best fit approach to modeling the decay curves for both dye systems show that the correlation between experimental and theoretical data is good for the fixed values of the four fitted parameters. A significantly better fit of the model predictions is obtained when K _f, K _b and f are maintained constant but D _eff is varied. This indicates that the surface diffusivity may vary as a function of surface coverage.     

Synthesis and Crystal Structure of Glycin·3,5-Dihydroxybenzoic Acid

The title compound glycin·3,5-dihydroxybenzoic acid (GDB) has been synthesized and characterized by single-crystal X-ray analysis. It crystallizes in orthorhombic, space group Pca21 with a = 25.513(10), b = 4.668(2), c = 9.150(4)(A), Z = 4, V = 1089.8(8)(A)3, C9H13NO7, Mr = 247.20, Dc = 1.507 g/m3, μ(MoKα) = 0.132 mm-1, F(000) = 520, R1 = 0.0322 and wR2 = 0.0611 for 885 observed reflections (I > 2σ(I)). The title compound is a 1:1 molecular complex of glycin and 3,5-dihydroxybenzoic acid, which is linked by O-H…O and N-H…O hydrogen bonds to form a three-dimensional framework. Test of SHG (second harmonic generation) indicates that NLO generation of the crystal is higher than that of KDP.     

Synthesis and new rearrangements of 4-isoxazolin-4,5-dicarboxylic acid derivatives

Acyclic nitrones react with dimethyl acetylenedicarboxylate (DMAD) to give stable isoxazolines, from which the ones that contain electron-donating aromatic rings at the C3 position (R¹) were shown to undergo unprecedented fragmentation at room temperature, giving the R¹-aldehyde and inseparable product mixtures, probably due to the formation of highly reactive species such as iminocarbenes. Attempts to convert the isoxazolines to the corresponding stable azomethine ylides, by refluxing in toluene, again led to the same product mixtures as above (e.g., the room temperature decomposition). Isoxazolines when reacted with methoxide at room temperature afforded highly functionalised diastereomeric mixtures. Also, isoxazolines, when reacted with propylamine, gave the corresponding amides regioselectively, all of which were more stable than the parent isoxazolines.     

Electrochemical Preparation of Poly(Malachite Green) Film Modified Nafion‐Coated Glassy Carbon Electrode and Its Electrocatalytic Behavior Towards NADH,Dopamine and Ascorbic Acid

Poly(malachite green) film modified Nafion‐coated glassy carbon electrodes have been prepared by potentiodynamic cycling in malachite green solution. The pH of polymerisation solution has only minor effect on film formation. Electrochemical quartz crystal microbalance (EQCM) was used to monitor the growth of the poly(malachite green) film. Cyclic voltammogram of the poly(malachite green) film shows a redox couple with well‐defined peaks. The redox response of the modified electrode was found to be depending on the pH of the contacting solution. The peak potentials were shifted to a less positive region with increasing pH and the dependence of the peak potential was found to be 56 mV per pH unit. The electrocatalytic behavior of poly(malachite green) film modified Nafion‐coated glassy carbon electrodes was tested towards oxidation of NADH, dopamine, and ascorbic acid. The oxidation of dopamine and ascorbic acid occurred at less positive potential on poly(malachite green) film compared to bare glassy carbon electrode. In the case of NADH, the overpotential was reduced substantially on modified electrode. Finally, the feasibility of utilizing poly(malachite green) film electrode in analytical estimation of ascorbic acid was demonstrated in flow injection analysis.