Differential FBG sensor for temperature-compensated high-pressure (or displacement) measurement

A differential fiber Bragg grating (FBG) sensor with a free active element bulk-modulus for high-pressure (or displacement) measurement is presented. Based on the differential measurement method and an isosceles triangle cantilever structure, problems of cross-sensitivity and chirped signal in FBG sensor are improved both theoretically and experimentally. Preliminary experiments indicate that temperature-compensated measurement results agree well with the theoretical analysis. Displacement measurement sensitivity is 1.75 pm/μm, and the estimated pressure measurement resolution can reach 0.27 MPa in case the wavelength shift measurement resolution is 0.01 nm.     

Determination of Hydrogen Single Ion Activity Coefficients in Aqueous HCl Solutions at 25°C

The single ion activity coefficients of hydrogen and chloride ions in aqueous HCl solutions have been estimated at 25°C at concentrations up to 1 mol-kg^–1, using potentiometric measurements with ion-selective electrodes and appropriate calibration procedures. Two methods are described for an internal calibration of the electrodes in the extended Debye–Hückel concentration range. The results are compared to the conventional pH calibration with external buffer solutions. Since the latter calibration method does not account for the liquid junction potential E _J which arises at the reference electrode, the resulting activity coefficients are quite different in HCl solutions of higher concentration. These differences between internal and external calibration decrease significantly, when a correction for E _J is introduced into the conventional pH calibration. Hence, in solutions of higher ionic strength the accuracy of the conventional pH electrode calibration using buffer solutions is very limited, when exact H⁺ activities are required. The consistency of the results indicates that the liquid junction potentials in the examined systems calculated by the Henderson/Bates approximation are of reasonable precision.     

Surface roughness investigation of semi-conductor wafers

Conventionally, surface roughness is predominantly determined through the use of stylus instruments. However, there are certain limitations involved in the method, particularly when a test specimen, such as a silicon wafer, has a smooth mirror-like surface. Hence, it is necessary to explore alternative non-contact techniques. Light scattering has recently been gaining popularity as an optical technique to provide prompt and precise inspection of surface roughness. In this paper, the total integrated scattering (TIS) model is modified to retrieve parameters on surface micro-topography through light scattering. The applicability of the proposed modified TIS model is studied and compared with an atomic force microscope. Experimental results obtained show that the proposed technique is highly accurate for measuring surface roughness in the nanometer range.     

应用无衍射贝塞尔光束的固体线膨胀系数测量系统

测量固体线膨胀系数是工程设计中的一项重要工作。这套非接触固体线膨胀系数测量系统利用激光三角法进行了设计。通过采用线阵CCD作为信号传感器来实现自动化测量。通过采用无衍射贝塞尔光束来提高测量精度和增大测量范围。     

光学系统光阑应用的实例

介绍了一种光学组合系统，通过构造光学系统虚拟的视场光阑实现人眼屈光度测量，它是光学系统光阑应用的生动实例.     

Measurement of wire diameter by optical diffraction

A combined interference and diffraction pattern, in the form of equidistant interference fringes, resulting from illuminating a vertical metallic wire by a laser beam is analyzed to measure the diameter of four standard wires. The diameters range from 170 to 450 μm. It is found that the error in the diameter measurements increases for small metallic wires and for small distances between the wire and the screen due to scattering effects. The intensity of the incident laser beam was controlled by a pair of sheet polaroids to minimize the scattered radiation. The used technique is highly sensitive, but requires controlled environmental conditions and absence of vibration effects. The expanded uncertainty for k=2 is calculated and found to decrease from U(D)=±1.45 μm for the wire of nominal diameter 170 μm to ±0.57 μm for the diameter 450 μm.     

工业污染排放中气──固两相流的光学测量

烟尘及各种工业性粉尘排放是典型的气-固两相系．迄今为止，国内外尚缺少有效的监测其排放的手段．本文基于光的散时原理，提出了一种非接触的光学方法，能对上述固体颗粒物的污染排放浓度及粒径大小进行实时、在线的监测。计算机模拟和实验研究表明，该方法具有广阔的工业应用前景。     

Assignments of methanol laser lines by frequency measurements and Fourier transform spectroscopy

We have measured the frequencies of four CH₃OH far-infrared laser lines that were previously known only by wavelength measurement. Two of these lines turned out to be doublets, bringing the total number of measured lines to six. We can now confirm the assignments of five of them and definitely disprove the assignments proposed for the sixth.In particular we confirm the assignments for the four strong laser lines at 205 and 208 µm pumped by the 9-P(34) CO₂ laser line. These lines share a common upper level in the first excited CO-stretch state, and terminate in the upper and lower levels of a hybrid state with J=5. Heterodyne frequency measurements and conventional microwave spectroscopy show that both lines are split into two components approximately 3.5 MHz apart. The origin of this further splitting is interpreted as a perturbed K-splitting.Work supported by Consiglio Nazionale delle Ricerche -Italia     

Experimental verification of drop/impact simulation for a cellular phone

Conducting drop tests to investigate impact behavior and identify failure mechanisms of small-size electronic products is generally expensive and time-consuming. Nevertheless, strict drop/impact performance criteria for hand-held electronic products such as cellular phones play a decisive role in the design because they must withstand unexpected shocks. The design of product durability on impact has heavily relied on the designer's intuition and experience. In this study, a reliable drop/impact simulation for a cellular phone is carried out using the explicit code LS-DYNA. Subsequently globallocal experimental verification is accomplished by means of high-speed photography and impact response measurement. Using this methodology, we predict potential damage locations in a cellular phone and compare them with real statistical data. It is envisaged that development of a reliable methodology of drop/impact simulation will provide us with a powerful and efficient vehicle for improvement of the design quality and reduction of the product development cycle.     

荧光光纤温度传感器激励光源的选择

本文分析计算了荧光光纤温度传感器的温敏元件——GsAlAs/GaAs双异质结半导体材料的荧光辐射效率与激励光波长的关系。讨论了温度测量范围及温敏元件GaAlAs层铝含量对激励光源的限制,在0～200℃测温范围内,若采用LED作激励光源,其峰值波长应在0.70～0.76μm之间选择。