高氯废水化学需氧量分析方法综述

对高氯废水化学需氧量分析方法进行归纳和综述。常用的高氯废水化学需氧量分析方法有氯气校正容量法、降氯密闭消解分光光度法以及高温氧化总有机碳系数换算法等。其中氯气校正容量法操控要求较高,分析耗时较长,不适用于大批量样品同步分析;降氯密闭消解分光光度法灵敏度高,但在降氯过程中增加了重金属盐硫酸汞的用量,分析成本较高,易产生二次污染,且对样品的均质性要求较高;高温氧化总有机碳系数换算法操作便捷、抗干扰能力强,但是换算系数易随不同来源、不同组分的样品发生波动,数据可比性需要通过实验验证。经过梳理归纳,明确各种分析方法的特点和适用范围,为研究人员选择合适的分析方法或进一步开展相关的方法研究提供参考。     

Molecular Fluorescence Imaging Spectroscopy for Mapping Low Concentrations of Red Lake Pigments: Van Gogh's Painting The Olive Orchard

Vincent van Gogh used fugitive red lake pigments that have faded in some paintings. Mapping their distribution is key to understanding how his paintings have changed with time. While red lake pigments can be identified from microsamples, in situ identification and mapping remain challenging. This paper explores the ability of molecular fluorescence imaging spectroscopy to identify and, more importantly, map residual non‐degraded red lakes. The high sensitivity of this method enabled identification of the emission spectra of eosin (tetrabromine fluorescein) lake mixed with lead or zinc white at lower concentrations than elemental X‐ray fluorescence (XRF) spectroscopy used on account of bromine. The molecular fluorescence mapping of residual eosin and two carmine red lakes in van Gogh's The Olive Orchard is demonstrated and compared with XRF imaging spectroscopy. The red lakes are consistent with the composition of paint tubes known to have been used by van Gogh.     

Label‐Free Imaging of Intracellular Temperature by Using the O−H Stretching Raman Band of Water

We propose a label‐free method for measuring intracellular temperature using a Raman image of a cell in the O?H stretching band. Raman spectra of cultured cells and the medium were first measured at various temperatures using a Raman microscope and the intensity ratio of the two regions of the O?H stretching band was calculated. The intensity ratio varies linearly with temperature in both the medium and cells, and the resulting calibration lines allow simultaneous visualization of both intracellular and extracellular temperatures in a label‐free manner. We applied this method to the measurement of temperature changes after the introduction of FCCP (carbonyl cyanide‐p‐trifluoromethoxyphenylhydrazone) in living cells. We observed a temperature rise in the cytoplasm and succeeded in obtaining an image of the change in intracellular temperature after the FCCP treatment.     

概率神经网络和FTIR光谱用于食道癌的辅助分析

利用正常与相应癌化食道组织的主要FTIR特征峰aυs,CH3、sυ,CH2、σCH2、aυs,po4-、υc-o、sυ,po2-及sυ,磷酸化蛋白作为概率神经网络的输入向量,对网络的主要参数(网络径向基函数分布spread(0~5))、输入向量和网络表现(m ean accurate rate of recogn ition)之间的关系进行了研究。主要结论如下:i)无论输入向量是哪种特征频率的组合,其平均识别正确率都高于71.40%;ii)当输入向量为特征频率sυ,po2、sυ,磷酸化蛋白或υc-0、sυ,po2、sυ,磷酸化蛋白时,网络表现较佳,平均识别正确率较好。当spread介于1.4~2.3时,两者均达到网络具有的最高平均识别正确率(85.71%);iii)大多数情况下,网络的平均识别正确率与spread之间呈现二个高峰的特征,即spread介于0.1~0.3和1.5~5.0之间时,网络均具有较高的平均识别正确率。研究表明,以傅里叶变换红外光谱的主要特征峰为概率神经网络的输入向量,用于食道组织样品的癌化识别分析是完全可能的,其平均识别正确率可达85.71%。     

Recent Analytical Approaches for the Study of Bioavailability and Metabolism of Bioactive Phenolic Compounds

The study of the bioavailability of bioactive compounds is a fundamental step for the development of applications based on them, such as nutraceuticals, functional foods or cosmeceuticals. It is well-known that these compounds can undergo metabolic reactions before reaching therapeutic targets, which may also affect their bioactivity and possible applications. All recent studies that have focused on bioavailability and metabolism of phenolic and terpenoid compounds have been developed because of the advances in analytical chemistry and metabolomics approaches. The purpose of this review is to show the role of analytical chemistry and metabolomics in this field of knowledge. In this context, the different steps of the analytical chemistry workflow (design study, sample treatment, analytical techniques and data processing) applied in bioavailability and metabolism in vivo studies are detailed, as well as the most relevant results obtained from them.     

对感生电场计算方法的探讨

对于感生电场的计算问题,在大学电磁学教材中一般都是利用反证法证明螺线管管内外的E感线都是与螺线管轴线相垂直的同心圆.笔者在此利用解析法和类比法两种方法来证明螺线管管内外的E感线都是与螺线管轴线相垂直的同心圆,并在此基础上计算了E感的大小,以供教学参考.     

Rotational flow of Oldroyd-B nanofluid subject to Cattaneo-Christov double diffusion theory

A nanofluid is composed of a base fluid component and nanoparticles, in which the nanoparticles are dispersed in the base fluid. The addition of nanoparticles into a base fluid can remarkably improve the thermal conductivity of the nanofluid, and such an increment of thermal conductivity can play an important role in improving the heat transfer rate of the base fluid. Further, the dynamics of non-Newtonian fluids along with nanoparticles is quite interesting with numerous industrial applications. The present predominately predictive modeling studies the flow of the viscoelastic Oldroyd-B fluid over a rotating disk in the presence of nanoparticles. A progressive amendment in the heat and concentration equations is made by exploiting the Cattaneo-Christov heat and mass flux expressions. The characteristic of the Lorentz force due to the magnetic field applied normal to the disk is studied. The Buongiorno model together with the Cattaneo-Christov theory is implemented in the Oldroyd-B nanofluid flow to investigate the heat and mass transport mechanism. This theory predicts the characteristics of the fluid thermal and solutal relaxation time on the boundary layer flow. The von K′arm′an similarity functions are utilized to convert the partial differential equations(PDEs) into ordinary differential equations(ODEs). A homotopic approach for obtaining the analytical solutions to the governing nonlinear problem is carried out. The graphical results are obtained for the velocity field, temperature, and concentration distributions. Comparisons are made for a limiting case between the numerical and analytical solutions, and the results are found in good agreement. The results reveal that the thermal and solutal relaxation time parameters diminish the temperature and concentration distributions, respectively. The axial flow decreases in the downward direction for higher values of the retardation time parameter. The impact of the thermophoresis parameter boosts the temperature distribution.     

Momentum and heat transfer of a special case of the unsteady stagnation-point flow

This paper investigates the unsteady stagnation-point flow and heat transfer over a moving plate with mass transfer,which is also an exact solution to the unsteady Navier-Stokes(NS)equations.The boundary layer energy equation is solved with the closed form solutions for prescribed wall temperature and prescribed wall heat flux conditions.The wall temperature and heat flux have power dependence on both time and spatial distance.The solution domain,the velocity distribution,the flow field,and the temperature distribution in the fluids are studied for different controlling parameters.These parameters include the Prandtl number,the mass transfer parameter at the wall,the wall moving parameter,the time power index,and the spatial power index.It is found that two solution branches exist for certain combinations of the controlling parameters for the flow and heat transfer problems.The heat transfer solutions are given by the confluent hypergeometric function of the first kind,which can be simplified into the incomplete gamma functions for special conditions.The wall heat flux and temperature profiles show very complicated variation behaviors.The wall heat flux can have multiple poles under certain given controlling parameters,and the temperature can have significant oscillations with overshoot and negative values in the boundary layers.The relationship between the number of poles in the wall heat flux and the number of zero-crossing points is identified.The difference in the results of the prescribed wall temperature case and the prescribed wall heat flux case is analyzed.Results given in this paper provide a rare closed form analytical solution to the entire unsteady NS equations,which can be used as a benchmark problem for numerical code validation.     

纤维复合材料界面横向拉伸分析

以单纤维十字型横向拉伸试验为研究对象,对纤维/基体界面采用弹性-软化双线性内聚力模型,建立了纤维复合材料在横向拉伸作用下界面法向失效过程的解析模型。得到了沿纤维/基体圆周界面的法向应力分布,纤维/基体界面的状态与界面承载力和单纤维复合材料承载力的关系,以及内聚力参数和试件几何尺寸对它们的影响。结果表明:纤维/基体圆周界面在脱粘前经历全部弹性及弹性+软化两种状态;当界面为弹性状态时,界面法向应力随界面强度线性增加;当界面为弹性+软化状态时,界面软化范围随界面裂纹萌生位移的增加而增大;界面初始脱粘位置与拉伸荷载方向重合;界面初始脱粘时的界面承载力随界面强度及界面裂纹萌生位移的增加而增加,随界面裂纹生成位移的增加而降低;单纤维复合材料的脱粘荷载受基体截面尺寸的影响,当纤维体积含量相同时,沿荷载方向截面尺寸的增大对提高脱粘荷载更显著。     

含有非圆形双孔的无限平板中应力的解析解研究

无限平板中含有任意形状单个孔的问题可以使用复变函数方法获得其应力解析解.对于无限平板中含有两个圆孔或两个椭圆孔的双连通域问题,也可以利用多种方法进行求解,比如双极坐标法、应力函数法、复变函数法以及施瓦茨交替法等.其中复变函数中的保角变换方法是获得应力解析解的一个重要方法.但目前尚未见到用此方法求解无限板中含有一个正方形孔和一个椭圆孔的问题.当板在无穷远处受有均布载荷和孔边作用垂直均布压力时,利用保角变换方法可以求解板中含有两个特定形状孔的问题.该方法将所讨论的区域映射成象平面里的一个圆环,其中最关键的一步是找出相应的映射函数.基于黎曼映射定理,提出了该映射函数一般形式,并利用最优化方法,找到了该问题的具体映射函数,然后通过孔边应力边界条件建立了求解两个解析函数的基本方程,获得了该问题的应力解析解.运用ANSYS有限单元法与结果进行了对比.研究了孔距、椭圆形孔大小和两孔布置方位对边界切向应力的影响,以及不同载荷下两孔中心线上应力分布规律.