A new powerful source for coherent VUV radiation: Demonstration of exponential growth and saturation at the TTF free-electron laser

We present experimental evidence that the free-electron laser at the TESLA Test Facility has reached the maximum power gain of 10⁷ in the vacuum ultraviolet (VUV) region at wavelengths between 80 and 120 nm. At saturation the FEL emits short pulses with GW peak power and a high degree of transverse coherence. The radiation pulse length can be adjusted between 30 fs and 100 fs. Radiation spectra and fluctuation properties agree with the theory of high gain, single-pass free-electron lasers starting from shot noise. Received 26 April 2002 Published online 28 June 2002     

A small and compact AMS facility for tritium depth profiling

Depth profiling measurements of tritium in carbon samples have been performed during the past seven years at the AMS facility installed at the Rossendorf 3 MV Tandetron. The samples have been cut from the inner walls of the fusion experiments ASDEX-upgrade/Garching and JET/Culham. The tritium content of the samples from JET required a dedicated AMS facility to prevent any contamination of the versatile 3 MV Tandetron. On the basis of an air-insulated 100 kV tandem accelerator equipped with a gas stripper an AMS facility exclusively devoted to tritium depth profiling was installed, tested and used for routine measurements. After additional successful tests employing diamond-like carbon (DLC) stripper foils at this accelerator, another small and compact 100 kV tandem accelerator with SF₆ insulation and a DLC stripper has been installed at the AMS facility. Results obtained with the different tandem accelerators are presented.     

Anvendung und Perspektiven der Strahlungsvernetzung in der Volkswirtschaft der DDR

Zum angegebenen Thema wurde vom Zentralinstitut für Festkörperphysik und Werkstofforschung der Akademie der Wissenschaften der DDR (ZfFW) gemeinsam mit dem Bezirksvorstand Dresden der Kammer der Technik am 9. 10. 1975 ein Tageskolloquium veranstaltet. Es wurden 100 Teil-nehmer registriert, wobci Kombinate und Betriebe zur Anwendung von Plasten und Elasten stark vertreten waren.     

The EIGER detector for low‐energy electron microscopy and photoemission electron microscopy

EIGER is a single‐photon‐counting hybrid pixel detector developed at the Paul Scherrer Institut, Switzerland. It is designed for applications at synchrotron light sources with photon energies above 5 keV. Features of EIGER include a small pixel size (75 µm × 75 µm), a high frame rate (up to 23 kHz), a small dead‐time between frames (down to 3 µs) and a dynamic range up to 32‐bit. In this article, the use of EIGER as a detector for electrons in low‐energy electron microscopy (LEEM) and photoemission electron microscopy (PEEM) is reported. It is demonstrated that, with only a minimal modification to the sensitive part of the detector, EIGER is able to detect electrons emitted or reflected by the sample and accelerated to 8–20 keV. The imaging capabilities are shown to be superior to the standard microchannel plate detector for these types of applications. This is due to the much higher signal‐to‐noise ratio, better homogeneity and improved dynamic range. In addition, the operation of the EIGER detector is not affected by radiation damage from electrons in the present energy range and guarantees more stable performance over time. To benchmark the detector capabilities, LEEM experiments are performed on selected surfaces and the magnetic and electronic properties of individual iron nanoparticles with sizes ranging from 8 to 22 nm are detected using the PEEM endstation at the Surface/Interface Microscopy (SIM) beamline of the Swiss Light Source.     

Study on the radiation problem caused by electron beam loss in accelerator tubes

The beam dynamic code PARMELA was used to simulate the transportation process of accelerating electrons in S-band SW linacs with different energies of 2.5, 6 and 20 MeV. The results indicated that in the ideal condition, the percentage of electron beam loss was 50% in accelerator tubes. Also we calculated the spectrum, the location and angular distribution of the lost electrons. Calculation performed by Monte Carlo code MCNP demonstrated that the radiation distribution of lost electrons was nearly uniform along the tube axis, the angular distributions of the radiation dose rates of the three tubes were similar, and the highest leaking dose was at the angle of 160° with respect to the axis. The lower the energy of the accelerator, the higher the radiation relative leakage. For the 2.5 MeV accelerator, the maximum dose rate reached 5% of the main dose and the one on the head of the electron gun was 1%, both of which did not meet the eligible protection requirement for accelerators. We adopted different shielding designs for different accelerators. The simulated result showed that the shielded radiation leaking dose rates fulfilled the requirement.     

Aryl Epoxides as Accelerators for the Photopolymerization of Oxetane Monomers

Epoxides bearing aryl groups function as “kick-starters” to markedly accelerate the photoinitiated cationic ring-opening polymerization of oxetane monomers. Thus, it has been observed that the inclusion of a small amount of styrene oxide transforms a sluggishly polymerizing 3-mono- or 3,3-disubstituted oxetane monomer into one that undergoes rapid, exothermic polymerization. Mechanistic studies suggest that the activity of aryl epoxides as “kick-starters” is related to their ability to intercept photogenerated acids to form benzylic cations that rapidly initiate oxetane monomer polymerization by alkylation of the monomer.     

Ignition of liquid and dust fuel layers by gaseous detonation

Abstract. Ignition of a liquid layer and dust fuel layer by a detonation wave propagating in hydrogen-oxygen and acetylene-oxygen mixtures is reported. Experiments were carried out using a shock tube equipped with optical-quality observation windows. A schlieren system and a high-speed camera were used for measurements of ignition delay. Pressure transducers provided data necessary for measurements of the detonation wave velocity and pressure variation within the front of the interacted detonation wave and fuel layer. Kerosene, nitroglycerin and PETN were used as fuels. Investigation shows that the layer of liquid fuel can be efficiently ignited by detonation wave. It was found that the ignition delay of the fuel layer depends mostly on the detonation wave velocity and sensitivity of igniting fuels, and slightly on the layer thickness. Received 12 August 2001 / Accepted 1 July 2002 Published online 4 February 2003 Correspondence to: P. Wolanski (e-mail: wolanski@itc.pw.edu.pl) An abridged version of this paper was presented at the 18th Int. Colloquium on the Dynamics of Explosions and Reactive Systems at Seattle, USA, from July 29 to August 3, 2001     

Radiation induced crosslinking of poly(vinyl methylether) in aqueous solutions

Radiation induced crosslinking of poly(vinyl methylether) (PVME) has been investigated in aqueous solutions. The spectral and kinetic features of the transients involved in the crosslinking reaction have been studied by pulse radiolysis of dilute PVME solutions. H atoms reacts with PVME, like OH radicals, by abstracting an H atom predominantly from β-position with respect to ---OCH₃ group, but the rate of reaction of H atom is an order of magnitude slower than that of OH reaction. The PVME radicals formed by H attack have been found to decay by usual 2nd-order kinetics unlike PVME radicals produced by OH attack that are reported to decay by a complex time-dependent kinetics that deviates strongly from 2nd-order kinetics. The rate constant of e⁻_aq with PVME at pH 5.5 has been found to be 1.2×10⁸ dm³ mol⁻¹ s⁻¹. From the decay behaviour of the transient species formed by reaction of e⁻_aq with PVME, it has been shown that the transient initially reacts with solvent protons by a fast reaction to yield radical species which subsequently recombine by a slow mode. The dependence of gelation dose and radiation yields of crosslinking (Gx) of PVME on various factors such as polymer concentration, dose rate, pH, presence of oxygen and crosslinking agent has also been studied by steady-state radiolysis using an electron-beam accelerator.