适用于挂飞投放试验的高可靠分离检测系统设计

挂飞投放试验在新型型号的研制过程中作为考核性试验项目应用的逐步广泛,分离检测作为挂飞试验的关键步骤,直接关系试验成败,因此对于分离系统提出了高可靠的要求,针对分离机构、拓扑逻辑设计及信号检测设备等方面开展了详细的设计,采取了双冗余等多种设计措施提升全系统的可靠性,设计结果可以吸收三度故障及部分四度故障,通过多次试验考核,表明该系统设计具有良好的可靠性。     

俄罗斯洲际弹道导弹及试射近况浅析

导弹试射及飞行试验是其研制、定型和服役过程中的重要环节,对于导弹武器系统的技术性能指标和作战使用性能考核、保障装备和新技术适应性验证、批生产质量可靠性检验、产品延寿、部队战斗力检验以及国家核威慑力展示等方面均具有重大意义。基于对国内外公开文献报道的系统梳理,较全面介绍了俄罗斯现役陆基洲际弹道导弹和潜射弹道导弹的发展历程及性能指标,浅析了其2010年以来的洲际弹道导弹试射近况,文献综述至2016年1月。     

重复Tesla变压器型相对论电子束加速器的初步试验

研制了一台重复率 Tesla型相对论电子束加速器。空心 Tesla变压器对充油Blumlein传输线充电 ;主开关为自击穿油间隙 ;二极管为平面阴极有箔二极管。试验在重复率为 0 .2 Hz和 1 Hz下分别进行。当重复率为 0 .2 Hz时 ,加速器连续重复放电 70次以上。二极管电压幅值 3 0 0 k V,脉宽 3 0 ns,上升沿约     

200KV重离子加速器及其应用

本文介绍一台采用双潘宁型多电荷重离子源的200kV重离子加速器,简述它在GaP光探测器的研制、聚合物材料和金属材料的离子注入改性等方面的研究与应用。     

Dosimetric characterization of the Exradin W1 plastic scintillator detector through comparison with an in-house developed scintillator system

New commercial dosimetry systems need careful characterization and can benefit from the comparison with similar, in-house developed solutions. A comparison between such two dosimetry systems, both based on fibre-coupled organic plastic scintillator detectors, is presented. One system is the Exradin W1, fully commercialized by Standard Imaging, while the other system is the non-commercial ME40 system, developed by DTU Nutech with the aim of fundamental dosimetric research. Both systems employ plastic scintillator detectors that can be considered similar in design, calibrated using the same method, but differing primarily in the signal detection hardware. The two systems were compared with respect to essential dosimetric properties, with the purpose of testing their performance under conditions less well discussed in the literature. A Farmer ionization chamber was used as the primary reference of the comparison. The study demonstrated that the Cerenkov light ratio calibration coefficient of both systems was not constant, but changed systematically with photon beam quality to a maximum difference of 1.1%. Calibration with respect to stem effect correction should therefore be performed for every investigated beam quality when using plastic scintillator detectors. Both systems were found to be dose rate independent, even for the highest instantaneous dose rate evaluated (1.5 mGy per pulse). Low-dose measurements revealed large uncertainties for both systems, although the ME40 system handled short beam deliveries under reference conditions with accuracy and precision within 0.4%. Changes in response due to field size dependence were investigated and found to be as large as 3.3% for the W1 and 5.4% for the ME40, biasing output factor measurements in large fields. Great caution is therefore advised if using either system for measurements in large fields or under circumstances where the fibre irradiation geometry is unfavourable. Measurements of reference dose to water yielded differences up to 1.5% when compared with the Farmer ionization chamber for all investigated beam qualities.     

高精度瑞奇-康芒检测法研究及测试距离精度影响分析

为实现高精度瑞奇-康芒法检测,利用检测系统光瞳面与被测平面镜二者间的坐标转换关系,结合最小二乘法直接对测得的系统波像差进行恢复,通过两角度检测分离由光路调整引入的离焦误差,得到更为精准的平面镜面形。分析光路中测试距离对坐标转换关系以及瑞奇角求解精度的影响,根据仿真分析结果确定实验方案。实验中采用两角度检测,对测试波前进行恢复并分离系统调整误差后,最终得到被检平面镜面形,结果峰谷(PV)值为0.182λ、均方根(RMS)值为0.0101λ,对比干涉仪直接检测结果 PV值为0.229λ、RMS值为0.013λ,PV检测精度优于λ/20,RMS检测精度优于λ/100,实验结果证明了此种面形恢复方法的有效性以及测试距离精度分析理论的正确性,从而实现了瑞奇-康芒法高精度检测。     

Experimental investigations of the functional morphology of dragonfly wings

Nowadays, the importance of identifying the flight mechanisms of the dragonfly, as an inspiration for designing flapping wing vehicles, is well known. An experimental approach to understanding the complexities of insect wings as organs of flight could provide significant outcomes for design purposes. In this paper, a comprehensive investigation is carried out on the morphological and microstructural features of dragonfly wings. Scanning electron microscopy （SEM） and tensile testing are used to experimentally verify the functional roles of different parts of the wings. A number of SEM images of the elements of the wings, such as the nodus, leading edge, trailing edge, and vein sections, which play dominant roles in strengthening the whole structure, are presented. The results from the tensile tests indicate that the nodus might be the critical region of the wing that is subjected to high tensile stresses. Considering the patterns of the longitudinal corrugations of the wings obtained in this paper, it can be supposed that they increase the load-bearing capacity, giving the wings an ability to tolerate dynamic loading conditions. In addition, it is suggested that the longitudinal veins, along with the leading and trailing edges, are structural mechanisms that further improve fatigue resistance by providing higher fracture toughness, preventing crack propagation, and allowing the wings to sustain a significant amount of damage without loss of strength.     

Optical testing of star sensor (II): Alignment of star sensor from off-line pictures taken in orbital test

Alignment error of an image sensor relative to the optical axis of a star sensor head and alignment errors between four heads were calculated from pictures taken in an orbital experiment. When comparing the image sensor alignment parameters in the orbital test and a ground test, both values matched well. By determining the relative relationship of the four heads using four pictures taken at the same moment in orbit and uploading the parameters to the star sensor system in orbit, the estimated attitude error was improved from 0.29 to 0.17°, though the accuracy was limited by the ±0.2° determination accuracy of the satellite itself. We estimated the attitude determination accuracy from separation angles between boresights of the four heads, calculated from pattern matching between downloaded pictures and a star catalogue. The estimated accuracy, in terms of potential optical performance, was 0.60 arcmin at 3σ, which is sufficient to satisfy the specification of 1 arcmin.     

加速器控制系统及其进展

目前加速器控制系统普遍采用了分布式体系结构, 使用系统集成工具进行开发, 当前加速器界主流的系统集成工具有EPICS、TANGO和商业SCADA产品. 在硬件方面, FPGA、DSP芯片广泛地用于硬件模块中实现数字化控制, 嵌入式EPICS IOC智能控制器是当今研究的一个热点. 软件方面, 除系统集成工具之外, 各大实验室都建立了自己的软件开发环境, 对软件开发进行标准化管理, 其中开放的软件平台Eclips, Abeans活跃在控制系统软件开发中. 目前具有挑战性的课题是系统高可用性研究. 本文将介绍加速器控制系统及技术方面的现状和进展.     

国内首次超导高频系统束流调试及高功率试验

2004—2007年BEPC高频系统从常温腔改建到超导腔, 逐渐解决了改频的物理问题和超导技术的工程难题, 实现了与国际先进技术接轨, 并按期保质完成了工程、调束任务. 高频系统是BEPCⅡ工程首个吸收国外超导技术、自主完成集成和调试成功的大型装置; 2006年7月国内首次超导高频大功率试验成功; 2006年11月完成系统联调, 按期投入BEPCⅡ首轮调束; 同年12月首次投入同步辐射运行; 2007年2至5月, 东、西两套超导高频系统在1MV以上的加速电压均已实现正/负电子1.89GeV注入积累和110/114mA对撞; 在同步辐射运行中, 逐渐达到2.5GeV/250mA、束流功率100kW, 接近国外同类机器水平; 束流试验证明两套高频系统的