Functionalization of chitosan with 3-nitro-4-amino benzoic acid moiety and its application to the collection/concentration of molybdenum in environmental water samples

A chitosan resin functionalized with 3-nitro-4-amino benzoic acid moiety (CCTS-NABA resin) was newly synthesized for the collection/concentration of trace molybdenum by using cross-linked chitosan (CCTS) as base material. The carboxyl group of the moiety was chemically attached to amino group of cross-linked chitosan through amide bond formation. The adsorption behavior of molybdenum as well as other 60 elements on the resin was examined by passing the sample solutions through a mini-column packed with the resin. After the elution of the elements collected on the resin with 1 M HNO₃, the eluates were analyzed by inductively coupled plasma-mass spectrometry (ICP-MS) and atomic emission spectrometry (ICP-AES).

The CCTS-NABA resin can adsorb several metal ions, such as vanadium, gallium, arsenic, selenium, silver, bismuth, thorium, tungsten, tin, tellurium, copper, and molybdenum at appropriate pHs. Among these metal ions, only molybdenum could be adsorbed almost completely on the resin at acidic regions. An excellent selectivity toward molybdenum could be obtained at pH 3–4. The adsorption capacity of CCTS-NABA resin for Mo(VI) was 380 mg g⁻¹ resin. Through the column pretreatment, alkali and alkaline earth metals in river water and seawater samples were successfully removed.

The CCTS-NABA resin was applied to the adsorption/collection of molybdenum in river water and seawater samples. The concentrations of molybdenum in river water samples were found in the range of 0.84 and 0.95 ppb (ng g⁻¹), whereas molybdenum in seawater was about 9 ppb. The validation of the proposed method was carried out by determining molybdenum in the certified reference materials of SLRS-4, CASS-4, and NASS-5 after passing through the CCTS-NABA resin; the results showed good agreement with the certified values.     

Modification of the resistance of two epoxy resins to accelerated weathering using calcium sulfate as a photostabilizer

Epoxy-timber composites have received increasing attention during the last decades because there are many advantages related to their uses as construction materials in applications such as timber bridges. However, the durability of epoxy-timber composites under outdoor conditions has become a concern for many epoxy resins. This study evaluated the chemical, thermal, and mechanical properties of two cured epoxies, the product of the diglycidyl ether of bisphenol A with 2,4-trimethyl-1,6-hexanediamine (DGEBA-TMDA) and the analogous resin prepared with the hydrogenated diglycidyl ether of bisphenol A (HDGEBA-TMDA), each mixed with 2?wt. % calcium sulfate (CS). We hypothesized that the use of CS, as an inorganic UV absorber, could decrease undesirable effects arising from exposure to UV light, moisture, and extreme temperatures.

An accelerated aging chamber simulated natural weathering for 1, 2, 3, 4, and 6?months. Chemical changes in cured epoxy systems over time in the presence and absence of CS fillers were determined using Fourier transform infrared spectroscopy (FT-IR). Thermal degradation profiles before and after exposure to accelerated weathering were followed by thermogravimetric analysis (TGA). The glass transition temperatures (T_g) before and after accelerated weathering were measured, and the effect of accelerated weathering on the surface morphology of the epoxy systems was investigated by scanning electron microscopy (SEM). In the presence of CS, after 6?months accelerated weathering the tensile strength of DGEBA-TMDA reduced by 23.8?±?2.4%, compared to 46.5?±?5.5% in its absence, while the corresponding values for HDGEBA-TMDA were 21.4?±?2.1% and 28.7?±?1.8%.     

Über Perrhenate. 3 Zum Aufbau des Mesoperrhenates Na3[ReO5]

About Perrhenates. 3 On the Structure of the Mesoperrhenate Na₃[ReO₅] By tempering powder samples (prepared from mixtures of binary oxides: Na₂O₂/ReO₂ and Na₂O/ReO₃ respectively, Na : Re = 3 : 1, Ar and O₂ atmosphere respectively, 400–450°C, corundum boat) in a closed Ag cylinder (500–550°C, 10 d) yellow single crystals of Na₃ReO₅, sensitive to moisture, were grown. The compound crystallizes trigonal, space group P3₁, P3₂ respectively, with a = 5.544(1), c = 13.580(7) Å, Z = 3, d_rö. = 4.62 g/cm³. The crystal structure [4-circle diffractometer data, 1091 I₀(hkl), AgKα, R = 6.14, R_w = 6.08%] is characterized by “isolated” bipyramids ReO₅. Na⁺ ions are occupying all the tetrahedral (Na2, Na3) and octahedral (Na1) holes of the pseudocubic face centred (c/a = 2.441) Re part of the lattice; resulting in a Na₃Re kation framework corresponding to the Li₃Bi type of structure. Effective Coordination Numbers (ECoN), the Madelung Part of Lattice energy (MAPLE) and the charge distribution (CHARDI) are computed and discussed.     

加速溶剂萃取同步净化-同位素内标-气相色谱-高分辨质谱测定水产品中32种多氯联苯

建立了加速溶剂萃取同步净化-同位素内标-气相色谱-高分辨质谱同时测定水产品中32种多氯联苯含量的方法。通过在加速溶剂萃取仪中加入2 g无水硫酸钠、1 g弗罗里硅土、50 g中性氧化铝作为吸附剂实现同步净化的效果，萃取溶剂为二氯甲烷-正己烷（1:1，v/v），萃取温度为100℃，循环2次。萃取结束后分别用0.5 mL浓硫酸净化两次，净化液浓缩定容后，采用气相色谱-高分辨质谱测定，同位素内标法定量。32种多氯联苯在0.1~20 μg/L范围内平均相对响应因子（RRF）的相对标准偏差（RSD）值（n=7）均小于15%，定量限（S/N=10）为0.3~1.9 ng/kg。在草鱼和海鲈鱼空白基质中做加标回收试验，添加水平为5、20和50 ng/kg，得到的平均回收率为71.9%~119.0%（n=6），RSD为3.5%~19.6%。该方法背景干扰低，灵敏度高，重现性好，回收率稳定，适用于水产品中多氯联苯的检测。     

Prediction of paper permanence by accelerated aging II. Comparison of the predictions with natural aging results

Accelerated aging tests are credible and useful to predict paper permanence only if such tests can be shown to correlate with natural aging. In the first part of this study, a kinetic model was developed based on the accelerated aging results. In this report, we have shown that this kinetic model can indeed predict the natural aging results of lignin-free sheets with a statistical confidence. This is the first quantitative comparison of accelerated aging with natural aging.     

Evaluation of single-ion conductances in nonaqueous solvents at 25°C by the use of tetrabutylammonium tetrabutylboride as a reference electrolyte

Precise conductances for tetrabutylammonium tetrabutylboride (Bu₄NBBu₄) at 25°C have been measured in a number of nonaqueous solvents, and the data have been analyzed by the 1957 Fuoss-Onsager conductance equation. Limiting ion conductances for the Bu₄N⁺ ion at infinite dilution ₀(Bu ₄ N ⁺) in various solvents have been evaluated by dividing ₀ values of the salt into two equal parts. The ₀(Bu ₄ N ⁺) values so obtained are in fairly good agreement (within±0.1–3.5%) with the corresponding values determined from direct transference number measurements in these solvents.     

Application of high resolution ICP-spectrometry to the determination of B,Be, Co,Mo and Sn in soils and similar matrices

The most sensitive emission lines for the elements B, Be, Co and Mo are strongly influenced by disturbing emission lines of Fe using normal optical resolution. The advantages of high resolution, applying the new ICP-spectrometer JY 38 Plus (Jobin-Yvon, France) with the 2400 lines/mm grating measuring in the 1st and 2nd order will be discussed. Beside the concentrations in soils, sediments and sludges, applying aqua regia and HF decomposition methods, the detection limits in these matrices will be given. The possibilities of ICP-spectrometry for the determination of the above-mentioned elements are shown at the examples of SRMs (standard reference materials). The materials used here were three soils and three sludges from the BCR (Community Bureau of Reference, European Communities) and one sediment from NBS (National Bureau of Standards, USA). For example, the most sensitive and normally used line for the determination of boron at 249.7733 nm cannot be used in case of this type of matrix due to normally high Fe-concentrations and due to a strong Fe-interference. Therefore, it is necessary to use the line at 249.6778 nm, where an interference-free measurement can be achieved in case of high optical resolution. The measured B-contents in these samples are in the range of 20 to 60 g/g, for Co in the 10 g/g region, for Be well below 1 g/g, for Sn between 3 and 400 g/g. Mo was only detectable in the sludge samples (limit of determination 0.5 g/g).Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

Preparation of candidate certified reference materials for the quality control of EDTA-and acetic acid-extractable trace metal determinations in sewage sludge-amended soil and terra rossa soil

The determination of extractable trace metal contents in soil using single extraction procedures is currently performed in many laboratories to assess the bioavailable metal fraction (and related phytotoxic effects) and the accessability to the environment (e.g. contamination of ground waters). Owing to the need for validation of the extraction schemes used and of the analytical techniques, the EC Measurements and Testing Programme (formerly BCR) has organized a project for improving the quality of determination of extractable trace metal contents in soil, the first step being an interlaboratory study to adopt common extraction procedures and the second being a certification campaign to certify two soils for their extractable trace element contents following these procedures. This paper gives a brief overview of the project organisation and describes the preparation, homogeneity and stability studies of two soil candidate reference materials (sewage sludge-amended and terra rossa soils).     

The effect of a coriolis force on Taylor-Couette flow

Taylor-Couette flow subject to a Coriolis force is studied experimentally and numerically. In the experiment, the Couette apparatus is mounted on a turntable with the axis of the cylinders orthogonal to the rotation vector of the turntable. The Coriolis force stabilizes the fluid against the onset of Taylor vortices and alters the velocity fields, both above and below the transition from the initial flow. At small dimensionless turntable frequencies, the transition yields time-independent Taylor vortices which are tilted with respect to the cylinder axis. At larger there is a direct transition to turbulence. We determine the first-order correction to the classical Couette initial flow, to account for the effects of the Coriolis force, by expanding in powers of. We present numerical results for the axial velocity (the only nonvanishing correction term to order) in the infinite-cylinder approximation.     

Two new standard reference materials for the determination of drugs of abuse in human hair

Two new standard reference materials (SRM) for drugs of abuse in human hair have been developed. SRM 2379 consists of hair spiked with cocaine, benzoylecgonine, cocaethylene, phencyclidine, amphetamine, and methamphetamine. SRM 2380 consists of hair spiked with codeine, morphine, monoacetylmorphine, and tetrahydrocannabinol (THC). The SRMs were prepared by soaking the hair in a solution of the target analytes in water-dimethylsulfoxide. The concentration of each analyte was determined using two methods, one based upon gas chromatography/mass spectrometry (GC/MS) and one based upon liquid chromatography/mass spectrometry (LC/MS). Both methods used 0.1 M HCl for extraction of all the analytes from the hair, except for THC, which was extracted with 1 M NaOH. For isolation of the analytes from the extracts, the GC/MS-based methods used different clean-up procedures from those used for the LC/MS-based methods. The results from the two methods were in good agreement with mean differences for the analytes ranging from 4% to 16%. These materials will enable laboratories performing analyses of hair for drugs of abuse to test the accuracy of their methods.