Traceability and analytical chemistry

 The basic concepts of traceability as they are defined by the Comité Consultatif pour la Cluantité de Matière are contrasted with the practical exploitation in chemical analysis. The applicability of traceability concepts are tested for their practical applicability on four different analytical methodologies, neutron activation analysis, plasma mass spectrometry, beam microscopical analysis and speciation analysis of organometallic compounds. Received: 31 March 1998 · Accepted: 6 June 1998     

The determination of adsorbable organically bound halogens (AOX) in soil: interlaboratory comparisons and reference materials

The interlaboratory variability in the quantification of adsorbable organically bound halogens (AOX) in industrially contaminated soil is presented. Three consecutive rounds of a proficiency testing scheme, in which between 88 and 119 routine laboratories participated, yielded relative reproducibility standard deviations between 7 and 20% at AOX contents between 10.9 and 268 mg kg⁻¹. Nineteen laboratories with established proficiency were invited to participate in the certification of the AOX content in three soil reference materials meant for the internal quality control in analytical laboratories. The certified values are (1349 ± 59) mg kg⁻¹, (80 ± 7) mg kg⁻¹ and (102 ± 8) mg kg⁻¹, respectively.     

有机元素微量分析标准物质——茴香酸的研制

茴香酸的分子式为C_8H_8O_3,碳含量63.15%、氢含量5.30%、氧含量31.55%、甲氧基含量20.40%。该标样与日本元素分析恳谈会委员会、英国化学协会微量化学委员会所公布的微量化学标样之一——香草醛一样,都具有相同的碳、氢、氧和甲氧基含量,美国国家标准局(NBS)发行SRM142茴香酸作为微量分析中甲氧基的分析标样。     

Mercury species immobilized on sulphydryl cotton: A new candidate reference material for mercury speciation

A batch of sulphydryl cotton microcolumns was prepared and charged with a mixed Hg standard solution (methyl-, ethyl- and inorganic Hg, 10 g l^–1 as Hg, 3 ml) and stored at 4 °C in a light-tight box. At regular time intervals over a 4 month period microcolumns were removed and Hg species were quantified by gas chromatography microwave-induced plasma atomic emission spectrometry (after elution, extraction and derivatization steps). It was found that analyte recoveries for methyl- and inorganic Hg were quantitative over the 4 month period while ethyl-Hg species appeared to be stable for up to 2 months.     

我国军用标准物质汇集

简要概述了标准物质的发展状况,汇集了军工所需的并经国家技术监督局审批发布的一级标准物质及其研制单位。     

高效除草剂快杀稗标准物质的制备及表征

从快杀稗工业品出发 ,经活性炭纯化、硅胶柱层析分离制得快杀稗标准物质 ,并进行熔点、高效液相色谱、紫外光谱、元素分析、红外光谱、质谱、核磁共振等方法的表征 ,以高效液相色谱法测得该标准品纯度在99%以上     

铜中杂质成分标准物质的研制

介绍铜中9种杂质成分标准物质的研制方法。以1号纯铜为基体，配入硫、铁、铅、锌、镍、铋、锑、磷、砷及锡共10种杂质成分，采用雾化喷粉加工工艺，保证了样品的均匀性。对样品表面作了抗氧化保护处理。采取多家实验室协作定值的方式对除砷外的9种杂质成分进行定值。5年的跟踪检验结果表明，该标准物质稳定性良好。     

Arsenic Speciation in Urine and Blood Reference Materials

Acute and chronic exposure to arsenic is a growing problem in the industrialized world. Arsenic is a potent carcinogen and toxin in humans. In the body, arsenic is metabolized to produce several species, including inorganic forms, such as trivalent (As^III) and pentavalent (As^V), and the methylated metabolites such as monomethylarsonic acid, (MMA^V), and dimethylarsinic acid (DMA^V), in addition to arsenobetaine (AsB) which is ingested and excreted from the body in the same form. Each of these species has been reported to possess a specific but different degree of toxicity. Thus, not only is the measurement of total As required, but also quantification of the individual metabolites is necessary to evaluate the toxicity and risk assessment of this element. There are a large number of reference materials that are used to validate methodology for the analysis of As in blood and urine, but they are limited to total As concentrations. In this study, the speciation of five arsenic metabolites is reported in blood and urine from commercial available control materials certified for total arsenic levels. The separation was performed with an anion exchange column using inductively coupled plasma mass spectrometry as a detector. Baseline separation was achieved for As^III, As^V, MMA^V, DMA^V, and AsB, allowing us to quantify all five species. Excellent agreement between the total arsenic levels and the sum of the speciated As levels was obtained.     

化学计量及其进展

扼要介绍了化学计量主要研究内容和量传方法。并从化学计量技术机构,基准、标准装置,标准物质,检定规程和化学计量学等方面,叙述了化学计量的进展概况。     

Development of an automated sequential injection on-line solvent extraction-back extraction procedure as demonstrated for the determination of cadmium with detection by electrothermal atomic absorption spectrometry

An automated sequential injection (SI) on-line solvent extraction-back extraction separation/preconcentration procedure is described. Demonstrated for the assay of cadmium by electrothermal atomic absorption spectrometry (ETAAS), the analyte is initially complexed with ammonium pyrrolidinedithiocarbamate (APDC) in citrate buffer and the chelate is extracted into isobutyl methyl ketone (IBMK), which is separated from the aqueous phase by means of a newly designed dual-conical gravitational phase separator. A metered amount of the organic eluate is aspirated and stored in the PTFE holding coil (HC) of the SI-system. Afterwards, it is dispensed and mixed with an aqueous back extractant of dilute nitric acid containing Hg(II) ions as stripping agent, thereby facilitating a rapid metal-exchange reaction with the APDC ligand and transfer of the Cd into the aqueous phase. The aqueous phase is separated in a second dual-conical gravitational phase separator, and 30 μl of it is entrapped and metered in a sample loop (SL) and subsequently introduced via air segmentation into the graphite tube for analyte quantification. The ETAAS determination is performed in parallel with the separation/preconcentration process of the ensuing sample. An enrichment factor of 21.4, a detection limit of 2.7 ng l⁻¹, along with a sampling frequency of 13 h⁻¹ were obtained at a sample flow rate of 6.0 ml min⁻¹. The precision (R.S.D.) at the 0.4 μg l⁻¹ level was 1.8% as compared to 3.2% when quantifying the organic extractant directly. The applicability of the procedure is demonstrated for the determination of trace levels of cadmium in three certified reference materials.