OPTIMAL DAMPING MATCHING Of SHOCK ABSORBER FOR A LIGHT TRUCK SUSPENSION SYSTEM

阻尼匹配是制约车辆悬架系统减振器设计的关键问题.以某轻型卡车为研究对象,利用MATLAB软件建立了悬架阻尼优化设计的半车模型.采用车体垂向加速度、俯仰角加速度和车轮动载均方根值作为评价指标,利用线性加权和法建立了悬架阻尼优化设计的目标函数.在随机路面激励下,对悬架系统阻尼进行了优化匹配和分析,并通过实车实验验证了优化效果.研究结果表明,悬架阻尼的匹配优化可有效提高车辆的行驶平顺性,从而为车辆悬架的动态设计提供有益参考.     

时变参数时滞减振控制研究

时滞动力吸振器对谐波激励有着良好的减振控制效果,但对随机激励的减振控制效果却并不明显,具体表现为时滞动力吸振器对随机激励的减振控制效果与被动吸振器几乎相同。针对上述问题,本文提出了一种新的时变参数时滞减振控制方法。在原有时滞减振控制方法的基础上,首先将时滞增益系数由定值形式变为时间函数形式,然后通过时变优化得到多组时滞控制参数并使其以一定时间周期循环作用于减振控制过程,通过这种方法进一步改善了时滞动力吸振器减振性能。本文最后以二自由度时滞动力吸振器减振模型为例,以主系统的振动响应为仿真对象,运用精细积分法求解了具有时变时滞参数的时滞动力学方程,以此得到了在谐波激励和随机激励作用下主系统振动的时域仿真结果。研究结果表明,在时变参数时滞动力吸振器的控制下,主系统无论是受谐波激励作用还是受随机激励作用,其振动位移、振动速度和振动加速度均比在定值参数时滞动力吸振器控制下时有大幅的减少,时滞动力吸振器的减振性能有了明显的改善。      

SU-8 based planar metamaterials with fourfold symmetry as selective terahertz absorbers

We report on the absorption properties of polarization-insensitive transmissive and reflective metamaterial absorbers based on two planar aluminium periodic structures and SU-8 epoxy resist. These absorbers were investigated using numerical simulation and experimental methods in the terahertz range (below 2 THz). SU-8 is a very promising organic material for dielectric layers in planar metamaterials, because its application simplifies the process of fabricating these structures and significantly reduces the fabrication time. The experimental absorption of the metamaterial absorbers has narrowband characteristics that were consistent with the numerical simulations. Power flow analysis in the transmissive metamaterial unit cell shows that the absorption in the terahertz range occurs primarily in the SU-8 layer of the absorber.     

Experimental Study of a Quad-Band Metamaterial-Based Plasmonic Perfect Absorber as a Biosensor

We present a metamaterial-based perfect absorber (PA) that strongly supports four resonances covering a wide spectral range from 1.8 µm to 10 µm of the electromagnetic spectrum. The designed perfect absorber has metal–dielectric–metal layers where a MgF₂ spacer is sandwiched between an optically thick gold film and patterned gold nanoantennas. The spectral tuning of PA is achieved by calibrating the geometrical parameters numerically and experimentally. The manufactured quad-band plasmonic PA absorbs light close to the unity. Moreover, the biosensing capacity of the PA is tested using a 14 kDa S100A9 antibody, which is a clinically relevant biomarker for brain metastatic cancer cells. We utilize a UV-based photochemical immobilization technique for patterning of the antibody monolayer on a gold surface. Our results reveal that the presented PA is eligible for ultrasensitive detection of such small biomarkers in a point-of-care device to potentially personalize radiotherapy for patients with brain metastases.     

二苯酮类紫外线吸收剂衍生物的分子设计

UV-0为母体结构，设计了系列新型含氟衍生物，以增强二苯酮类紫外线吸收剂在涂层表面的含量，提高其抗紫外线性能. 为探讨含氟侧链的引入对几何构型和电子光谱等性质的影响，筛选新型紫外线吸收剂，采用量子化学密度泛函理论在B3LYP/6-31++G**水平上对标题化合物分子几何构型进行了优化和电子光谱研究. 计算结果表明：含氟侧链通过酯键连接时，随着侧链的增长，O17与环B之间的共轭作用减弱，分子共轭体系减小，对紫外线的吸收能力变弱；含氟侧链通过醚键连接时，其在230~290 nm、310~400 nm区间有更强的紫外线吸收能力，同时含氟侧链的长度对紫外吸收曲线的影响较小. 综合考虑衍生物的紫外线吸收能力和的表面富集能力，预测化合物Ⅴ最优.     

Infrared Absorber Leveling in Ultra-Wideband by Using Hybrid Plasmonic Structure

In this paper, an effective ultra-broadband absorber in long-wavelength infrared is achieved by a metal-insulator-metasurface (MIM) stacked structure. This absorber exhibits an average absorption of 90% at wavelengths ranging from 8 to 14 µm and a maximum absorption rate of up to 97.1%. It is found that the performance is achieved by three mode combinations. The ultra-broadband leveling absorber is to be polarization-independent due to its geometrical symmetry. The absorption property can be controlled by the parameters of the triangle unit. It has great potential in many applications such as infrared detection and imaging.     

Potential of AMnO3 (A=Ca,Sr, Ba,La) as Active Layer in Inorganic Perovskite Solar Cells

Inorganic perovskite CaMnO was proposed as a substitution for the TiO anatase in electron transport layers of solar cells containing the hybrid perovskite CH NH PbI based on increased mobility of electrons and better optical matching. Due to a suitable band gap concerning the absorption of sunlight, we investigate the potential of CaMnO and similar manganite perovskites, where Ca is replaced by either Sr, Ba or La, as an absorber layer in inorganic perovskite solar cells. In this study, we have used optical measurements on the synthesized AMnO (A=Ca, Sr, Ba, La) samples to aid density functional theory calculations (DFT) in order to accurately simulate the electronic and optical properties of AMnO compounds and gauge their potential for the role of absorber layer. Both experimental measurements and theoretical calculations show suitable band gap of 1.1-1.5 eV, depending on the compound, and absorption coefficients of the order of cm in the visible part of the spectrum.