Synthesis and characterization of nanostructured strontium hexaferrite thin films by the sol–gel method

Nanostructured single phase strontium hexaferrite, SrFe₁₂O₁₉, thin films have been synthesized on the (100) silicon substrate using a spin coating sol–gel process. The thin films with various Fe/Sr molar ratios of 8–12 were calcined at different temperatures from 500 to 900 °C. The composition, microstructure and magnetic properties of the SrFe₁₂O₁₉ thin films were characterized using Fourier transform infrared spectroscopy, differential thermal analysis, thermogravimetry, X-ray diffraction, electron microscopy and vibrating sample magnetometer. The results showed that the optimum molar ratio for Fe/Sr was 10 at which the lowest calcination temperature to obtain the single phase strontium hexaferrite thin film was 800 °C. The magnetic measurements revealed that the sample with Fe/Sr molar ratio of 10, exhibited higher saturation magnetization (267.5 emu/cm³) and coercivity (4290 Oe) in comparison with those synthesized under other Fe/Sr molar ratios.     

Monodisperse Co,Zn-Ferrite nanocrystals: Controlled synthesis,characterization and magnetic properties

Co_xZn_yFe_3−x−yO₄ ferrite (x=1 to 0; y=0 to1) nanocrystals have been synthesized by reverse microemulsion method. The nanocrystals are then comprehensively characterized by X-ray diffraction, Fourier transform infrared spectroscopy, Field emission transmission electron microscopy (FETEM), and magnetic properties were measured by using Vibrating sample magnetometer. X-ray analysis showed that all the crystals were cubic spinel. The lattice constant increased with the increase in Zn substitution. FETEM reveals that particle size varies in the range from 3 to 6 nm. As the concentration of Zn increases the magnetic behavior varies from ferromagnetic at y=0 and 0.2 to superparamagnetic to paramagnetic at y=1. The Curie temperature decreases with increasing concentration of Zn.     

Complex object 3D measurement based on phase-shifting and a neural network

An accurate phase-height mapping algorithm based on phase-shifting and a neural network is proposed to improve the performance of the structured light system with digital fringe projection. As phase-height mapping is nonlinear, it is difficult to find the best camera model for the system. In order to achieve high accuracy, a trained three-layer back propagation neural network is employed to obtain the complicated transformation. The phase error caused by the non-sinusoidal attribute of the fringe image is analyzed. During the phase calculation process, a pre-calibrated phase error look-up-table is used to reduce the phase error. The detailed procedures of the sample data collection are described. By training the network, the relationship between the image coordinates and the 3D coordinates of the object can be obtained. Experimental results demonstrate that the proposed method is not sensitive to the non-sinusoidal attribute of the fringe image and it can recover complex free-form objects with high accuracy.     

模拟大气风场及其数据处理技术的研究

热层大气风速的测量可以采用干涉法来进行,由于光源（气辉辐射谱线）的强度很弱,故干涉法对测量系统要求很高。利用半导体激光器（LD）的调制特性和法布里-帕罗干涉仪(FPI)的高光谱分辨能力设计了一种用简单设备进行大气风场模拟与测量的方法。改变LD的驱动电流使其输出激光频率改变,从而模拟气辉辐射的多普勒频移,通过分析FPI获得的干涉图可检测出该频移,进而得到等效风速。模拟风速的相对误差不超过6.5%,最小模拟风速为20.01m/s,且测量结果与LD的线性调制特性很相符。使用该方法可以有效地对多普勒风速测量原理、数据处理方法、系统性能以及测量误差进行分析和评估。     

法拉第旋转镜用于补偿单光子偏振漂移的实验研究

研究了法拉第旋转镜用于补偿单模光纤中1 550 nm单光子传输的偏振漂移特性.比较了不同平均光子数下经由不同长度单模光纤传输后单光子偏振漂移的差异,以及使用法拉第旋转镜的偏振漂移抑制比.实验结果表明,在50 km光纤50 kcps光子计数（光强）下偏振漂移改善最优,偏振漂移抑制比达25.3.     

Non-coherent noise reduction in digital holography based on root mean square technique

In this paper, the root mean square (rms) technique is applied in order to reduce the non-coherent noise in phase-contrast image. The proposed technique is applied to a sample of 200 μm step height nominally. The recorded off-axis interferograms generated from two different wavelengths are processed to obtain an object wave (amplitude and phase) for each wavelength separately. The independent phase maps are subtracted and a phase map for the beat-wavelength is obtained and converted to height map. The rms values of 10 pixels profiles from the obtained height map are calculated automatically to show the three-dimensional (3D) profile. The experimental results show that the non-coherent noise is reduced by the order of 90% when the rms technique is applied and the uncertainty in measurement has been found to be of the order of 1.5 μm. The proposed technique can provide a simple and real solution for measuring 3D objects having high abrupt height difference.     

适用于非常规工作环境中热释电型激光能量计的研制

现有的激光能量计传感器灵敏度系数都与其所处环境温度有关,在-50℃～70℃的温度范围内,灵敏度偏差较大,直接影响测量结果。为了达到消除环境温度的影响,采取在不同环境温度下对热释型能量计的灵敏度进行校准的研究方法。该校准方法与普通激光能量计的校准方法的不同之处在于对热释电型能量计进行校准时,温度由室温扩展到-50℃～70℃的温度范围。利用环境试验箱,每隔10℃固定一个温度点,进行激光能量的测量实验,得到各个温度点所对应的灵敏度修正系数,再借助最小二乘法建立起各个温度点上能量计灵敏度系数同环境温度的函数关系,从而实现了-50℃～70℃的温度范围内激光能量的准确计量。研制能直接工作于非常规工作环境下的热释电型激光能量计,对解决激光能量测量的外场需求有一定现实意义。     

The beam-based calibration of an X-ray pinhole camera at SSRF

A pinhole camera for imaging X-ray synchrotron radiation from a dipole magnet is now in operation at the Shanghai Synchrotron Radiation Facility (SSRF) storage ring. The electron beam size is derived by unfolding the radiation image and the point spread function (PSF) with deconvolution techniques. The performance of the pinhole is determined by the accuracy of the PSF measurement. This article will focus on a beam-based calibration scheme to measure the PSF system by varying the beam images with different quadrupole settings and fitting them with the corresponding theoretical beam sizes. Applying this method at SSRF, the PSF value of the pinhole is revised from 37 to 44 μm. The deviation in beam size between the theoretical value and the measured value is minimized to 4% after calibration. This optimization allows us to observe the horizontal disturbance due to injection down to as small as 0.5 μm.     

光学材料光学均匀性的波长调谐两步绝对测量法

光学均匀性是光学材料的重要指标,目前高精度的测量方法一般采用绝对测量法,而该方法步骤繁琐,容易受环境影响。根据波长移相干涉仪的移相特点,提出了测量光学材料光学均匀性的波长调谐两步绝对测量法。该方法在波长移相干涉仪中通过平行平板放入测量和空腔测量两个步骤得到平行平板的光学均匀性。在模拟仿真验证方法的正确性后,进行了实验研究,并与传统的绝对测量法的测量结果进行比较。结果表明,波长调谐两步绝对测量法可用于测量平行平板的光学均匀性,且测量步骤简单,精度较高。     

Four-mode continuous-variables entangled state: generation from beam splitter, a parametric down-conversion and a polarizer

We introduce a new kind of four-mode continuous variable entangled state in Fock space. The completeness relation and the partly nonorthonormal property of such a state are proven. The scheme to generate this state is presented by combining a symmetrical beamsplitter, a parametric down-conversion and a polarizer. After making a single-mode quadrature amplitude measurement, the remaining three modes are kept in entanglement. And its applications are also discussed.