Laser irradiation induced spectral evolution of the surface-enhanced Raman scattering(SERS) of 4-tert-butylbenzylmercaptan on gold nanoparticles assembly

The spectral evolution of the surface-enhanced Raman scattering (SERS) of 4-tert-butylbenzylmer-captan (4-tBBM) on gold nanoparticles assembly under laser irradiation is reported. The relative intensities of typical peaks in the spectrum of 4-tBBM gradually change with irradiation time. Comparison of the rate of spectral changes under several experimental conditions indicates that the surface plasmon resonance (SPR) induced heat in the gold nanoparticles assembly is the origin of the spectral evolution. During the process of self-assembly, 4-tBBM molecules do not form a compact ordered monolayer because of the spatial hindrance of the 4-tert-butyl end group. The heat induced by laser irradiation drives the 4-tBBM molecules to rearrange to a more stable orientation.     

Effect of vibrational excitation of HBr on the H+HBr abstraction and exchange reactions

The effect of vibrational excitation of HBr on the H+HBrH₂+Br and H+HBrH+HBr reactions has been investigated on the extended LEPS surface (ELEPS) constructed on the basis of quantum chemically calculated points of PES. Together with this surface the LEPS surface of Sudhakaran and Raff [1] was used for comparison at two relative translational energies. A quasiclassical trajectory method was used to study the abstraction and exchange reaction dynamics. The reactive cross section was calculated as a function of the relative collision energy and the vibrational state of HBr. The following conclusions can be drawn from the results of the study: (i) vibrational excitation v=0 v=2 more than doubles the reaction cross section, (ii) the increase in the collision energy is most effectively channelled into the product translational energy.Dedicated to Professor J. Koutecký on the occasion of his 65th birthday     

医用聚氯乙烯膜的等离子体表面改性

用两种不同气氛的辉光放电等离子体工艺对医用软质聚氯乙烯（ＰＶＣ）膜进行了表面改性研究。结果表明，聚合性气氛的等离子体改性效果明显优于非聚合性气氛。平整致密的聚合膜对ＰＶＣ增塑剂——邻苯二甲酸二辛酯的迁移和扩散起了阻挡作用，也使膜表面亲水性和表面张力极性成份增大，液固相界面张力减小，生物相容性得以改善。     

Structures and energies of seleno derivatives of biuret.Ab Initio comparative studies of diselenobiuret, selenobiuret, and selenothiobiuret

Ab initio studies (LCAO-MO method) on conformers of three seleno derivatives of the biuret molecules diselenobiuret [I], selenobiuret [II], and selenothiobiuret [III] were carried out at the Hartree-Fock (HF) and MP2 levels. The molecular geometries of these species were fully optimized at the HF level and characterized by analysis of the harmonic vibrational frequencies using a split-valence triple-zeta basis set augmented by a set ofd polarization functions on heavy atoms andp polarization functions on hydrogen atoms [TZP(d, p)]. The total energies of the HF-optimized structures were calculated at the MP2 (frozen core) level using a larger TZP (2df, 2pd) basis set. The potential energy searches revealed a total of 11 minimum-energy conformers (assigned astrans-trans, trans-cis, cis-trans, andcis-cis) and seven transition-state species for the title molecules. The two predicted conformers for diselenobiuret (Ia=trans-trans andIc=cis-cis) are characterized byC ₂ and the third byC _s symmetry. For selenothiobiuret two forms (IIIa=trans-trans andIIId=cis-cis) possessC ₁ and two (IIIb=trans-cis andIIIc=cis-trans) possessC _s symmetries, respectively. For selenobiuret, four formsIIa=trans-trans (C₁),IIb=trans-cis (C _s),IIc=cis-trans (C ₁), andIId=cis-cis (C₁), were obtained as a result of gradient optimization. Comparison of the relative energies for the considered species indicated that thecis-trans forms are the most stable conformations for all three systems at both the HF and MP2 levels of theory.     

用低能电子衍射研究Ag(100)表面吸附氯的表面结构

引言我们曾研究了金属镍,铜,钛,钨,铝,铁,银,铂,钼等和非金属硅与石墨及ⅢA—VA与ⅡB—ⅥA化合物晶体等的弛豫、重构和吸附表而的60多个表面结构。本文报道研究Ag(100)c(2×2)—C1表面的结果。Zanazzi和Jona观测了Ag(100)c(2×2)—C1表面结构的21束LEED谱,并采用层—KKR(Korring—Kohn—Rostocker)法,对清洁的Ag(100)表面吸附C1原子时假设了4种结构模型。经理论计算与观测值的比较,提出了C1原子的单层吸附和C1原子与Ag原子     

Double-Layer Contribution to the Surface Tension of Halides of Alkali Metals

Effects of interface charging on the surface tension of simple halides of alkali metals are analyzed. The surface tension, computed within the density functional theory in an approximation of the squared density gradient using a parametrized profile and a mean spherical approximation for a local free energy, satisfactorily conforms to experiment.     

Thermal behaviour of advanced composite materials based on SiC fibres

Emanation thermal analysis (ETA) was used for characterization of thermal behaviour of SiC_f/SiC composites on heating in argon and air, respectively. Effect of gas environment (argon, air) and helium ions implantation on the microstructure development of the SiC_f/SiC composite prepared by chemical vapour infiltration (CVI) from Nicalon CG fibres was investigated under in situ conditions of heating. The annealing of near surface structure irregularities was observed in the range 280-700°C and evaluated by means of the mathematical model, assuming that the structure irregularities served as diffusion paths for radon. The ETA reflected the formation of amorphous silica and its subsequent crystallization to crystoballite. Morphology of the SiC_f/SiC samples before and after the heat treatments was characterized by means of SEM. This revised version was published online in July 2006 with corrections to the Cover Date.     

Method for Smoothing the Boundaries of the Van Der Waals Models of Molecules

A geometrical method is suggested for representing a molecule by a smoothed region. The effective volume and surface area are calculated, which results in more adequate proportionality of interactant molecules compared to the classical van der Waals models.     

Zirconium(IV)-porphyrins as novel ionophores for fluoride-selective polymeric membrane electrodes

The feasibility of using Zr(IV)-porphyrins as novel ionophores for preparing anion-selective polymeric membrane electrodes is examined. Electrodes constructed using o-nitrophenyl octyl ether plasticized poly(vinyl chloride) membranes containing Zr(IV)-octaethylporphyrin (OEP) dichloride (Zr(IV)[OEP]Cl₂) or Zr(IV)-tetraphenylporphyrin (TPP) dichloride (Zr(IV)[TPP]Cl₂) were found to exhibit enhanced potentiometric selectivity toward fluoride compared to electrodes based on a typical anion-exchanger (e.g. tridodecylmethylammonium chloride). At pH 5.5, the electrodes displayed the following selectivity sequences: ClO₄⁻ > SCN⁻ > I⁻ > F⁻ > NO₃⁻ > Br⁻ > NO₂⁻ > Cl⁻ and F⁻ > ClO₄⁻ > SCN⁻ > I⁻ > NO₂⁻ > NO₃⁻ > Br⁻ > Cl⁻ for membranes doped with Zr(IV)[OEP]Cl₂) and Zr(IV)[TPP]Cl₂, respectively. Both ionophores are shown to operate via a charged carrier mechanism, with 10 mol% of lipophilic tetraphenylborate derivative in the membrane phase required to achieve optimal selectivity. Electrodes prepared with both metalloporphyrin species display super-Nernstian response toward fluoride with slopes typically greater than −100 mV per decade. It is shown, via UV-VIS spectroscopy of the membrane phase, that this behavior occurs due to spontaneous formation of hydroxide ion bridged porphyrin dimers in the membrane in the presence of the lipophilic anionic additive. The dimers are easily converted to monomeric species upon increasing the concentration of fluoride in the sample solution. Decreasing the pH of sample buffer background solution (from pH 5.5 to pH 3) decreases the lower detection limit (DL) of the electrode response toward fluoride (by two-order of magnitude) and improves the electrodes’ selectivity.     

Metal Oxide Thin Films Containing Au Nano-Particles Prepared with Gas Diffusion Method

Au particles dispersed thin metal oxide films were prepared from precursor films containing HAuCl₄ with H₂S gas diffusion method. HAuCl₄ was uniformly dissolved in the films as promoted by hydroxypropyl cellulose (HPC). The mechanism of the Au particle formation was studied. It was found that HAuCl₄ was converted directly to Au metal particles upon contacting with H₂S gas. Au particles generated by this method were characterized with small particle size, sharp size distribution and high volume fraction in the films. The surface plasma resonance absorption of Au particles shifted to longer wavelength when TiO₂ component was introduced in the matrix.