Theoretical studies of mechanisms of cycloaddition reaction between difluoromethylene carbene and acetone

Mechanisms of the cycloaddition reaction between singlet difluoromethylene carbene and acetone have been investigated with the second‐order Møller–Plesset (MP2)/6‐31G* method, including geometry optimization and vibrational analysis. Energies for the involved stationary points on the potential energy surface (PES) are corrected by zero‐point energy (ZPE) and CCSD(T)/6‐31G* single‐point calculations. From the PES obtained with the CCSD(T)//MP2/6‐31G* method for the cycloaddition reaction between singlet difluoromethylene carbene and acetone, it can be predicted that path B of reactions 2 and 3 should be two competitive leading channels of the cycloaddition reaction between difluoromethylene carbene and acetone. The former consists of two steps: (i) the two reactants first form a four‐membered ring intermediate, INT2, which is a barrier‐free exothermic reaction of 97.8 kJ/mol; (ii) the intermediate INT2 isomerizes to a four‐membered product P_2b via a transition state TS2b with an energy barrier of 24.9 kJ/mol, which results from the methyl group transfer. The latter proceeds in three steps: (i) the two reactants first form an intermediate, INT1c, through a barrier‐free exothermic reaction of 199.4 kJ/mol; (ii) the intermediate INT1c further reacts with acetone to form a polycyclic intermediate, INT3, which is also a barrier‐free exothermic reaction of 27.4 kJ/mol; and (iii) INT3 isomerizes to a polycyclic product P₃ via a transition state TS3 with an energy barrier of 25.8 kJ/mol. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

高效液相色谱-串联质谱法同时测定表层水体中5类40种抗生素

建立了固相萃取-高效液相色谱-串联质谱（SPE-HPLC-MS/MS）同时检测表层水中5类40种抗生素的分析方法。水样经过滤、固相萃取柱富集净化后，以乙腈-0.2%（v/v）甲酸水溶液为流动相进行梯度洗脱，采用电喷雾电离源，在多反应监测、正离子模式进行定性定量分析。结果显示，40种抗生素在1~200 μg/L水平下线性关系良好，平均加标回收率为41.3%~112.6%。采用该方法对长江南京段表层水体进行检测，共检出13种抗生素，含量为13.4~780.5 ng/L，其中喹诺酮类抗生素恩诺沙星检出率达100%，大环内酯类抗生素克林霉素最高检出水平达739.4 ng/L。该法高效、灵敏、可靠，可用于实际水样中多种抗生素的分析。     

V-Ag-Ni系氧化物的表面氧性质与甲苯选择性氧化的催化性能

制备了一系列Ｖ，Ａｇ，Ｎｉ原子比不同的三元氧化物，应用ＴＰＤ－ＭＳ技术研究了样品表面氧的性质，并测定了甲苯选择性氧化生成苯甲醛的催化活性。实验结果表明，样品表面存在有多种吸附的氧物种。在脱附温度＜９００℃：当Ｎｉ含量对Ａｇ（或Ｖ）的原子比为０．２５或０．５０时，仅在低温处出现有表面的Ｏ＾－和Ｏ＾２＾－两种氧物种的脱附峰；当Ｎｉ含量对Ａｇ（或Ｖ）的原子比增高到＞０．７５时，除有表面的Ｏ＾－和Ｏ＾２＾     

Computer modelling of the conformational equilibrium of 2-and 2,5,5-substituted 1,3,2-dioxaborinanes

Empirical, semiempirical, and nonempirical quantum-chemical methods were used to study the conformational equilibrium of 2,5,5-substituted 1,3,2-dioxaborinanes. The sofa invertomers were found to correspond to the local and global minima on the potential energy surface. The position of the equilibrium between these forms is a function of the substituents at C₍₅₎ of the heterocycle. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 12, pp. 1860–1865, December, 2007.     

New method for calculating the adsorption of noble gases on amorphous surfaces

A new approach to calculating the equilibrium characteristics of the adsorption of noble gases on the amorphous surfaces of adsorbents was developed and applied to the Ar−TiO₂(rutile) system. Intermolecular adsorbate-adsorbate interactions are taken into account for the nearest neighbors in the quasi-chemical approximation. The lattice energy parameters of all interactions of the model are determined from the Lennard-Jones potential (12-6). The formation of amorphous TiO₂(rutile) surface includes completion of the surface layers and partial removal of the surface oxygen ions. The quality of the amorphization procedure was confirmed by the experimentally measured heats and isotherms of adsorption of the system under study. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1109–1118, June, 1997.     

Contributions of restructuring and oxidation to the aging of the surface of plasma polymers containing heteroatoms

The properties and composition of plasma polymer surfaces stored in air can change considerably over time, especially as a result of oxidative reactions. When plasma polymers contain an element other than O, it is possible to probe for mechanisms in addition to oxidation that contribute to the aging of the surface. Plasma polymers containing N were fabricated from either 1,3-diaminopropane (DAP),n-heptylamine (nHA), or allylamine (AA), and studied by X-ray photo-electron spectroscopy (XPS) and air/water contact angles (CA). For each of the plasma polymers, a multiexponential increase in the O/C ratio was observed over time using XPS. The N/C ratios remained constant (AA) or decreased somewhat (nHA and DAP). In contrast, the trends in CA values differed, declining for the nHA surfaces, rising for the AA, and changing little for the DAP. Surface roughness, assessed by scanning tunnelling or atomic force microscopy, did not change over time. The diverse adjustments in the polarity of each surface and the similar compositional changes between them are reconcilable if the aging of the plasma polymer surface is a manifestation of the superposition of concurrent oxidative reactions and partial surface reorientation; the former introduce polar groups and the latter transports then from the surface to deeper regions beyond the CA probe depth but within the XPS analysis depth. These processes vary between different plasma polymers. Data for the alkylamine plasma polymers is also compared with that for two plasma polymers fabricated from methanol. The change in composition, but not polarity, of the DAP surface after 4 days of storage demonstrates the importance of using multiple techniques to characterize the aging of plasma polymer surfaces.     

Optimization of culture parameters for production of podophyllotoxin in suspension culture of Podophyllum hexandrum

The root explants of the germinated seedlings of Podophyllum hexandrum were grown in MS medium supplemented with indole acetic acid (IAA) (2 mg/L) and activated charcoal (0.5%), and healthy callus culture was obtained after incubation for 3 wk at 20°C. The cultivation of plant cells in shake flask was associated with problems such as clumping of cells and browning of media, which were solved by the addition of pectinase and polyvinylpyrrolidone. The effect of major media components and carbon source was studied on the growth and podophyllotoxin production in suspension culture. It was found that glucose was a better carbon source than sucrose and that NH₄ ⁺:NO₃ ⁻ ratio (total nitrogen concentration of 60 mM) and PO₄ ³⁻ did not have much effect on the growth and product formation. The relative effect of culture parameters (inoculum level, pH, IAA, glucose, NH₄ ⁺:NO₃ ⁻ ratio, and PO₄ ³⁻) on the overall growth and product response of the plant cell suspension culture was further investigated by Plackett-Burman design. This indicated that inoculum level, glucose, IAA, and pH had significant effects on growth and production of podophyllotoxin. To identify the exact optimum concentrations of these parameters on culture growth and podophyllotoxin production, central composite design experiments were formulated. The overall response equations with respect to growth and podophyllotoxin production as a function of these culture parameters were developed and used to determine the optimum concentrations of these parameters, which were pH 6.0, 1.25 mg/L of IAA, 72 g/L of glucose, and inoculum level of 8 g/L.     

Microwave and RF surface wave sustained discharges as plasma sources for plasma chemistry and plasma processing

The surface wave produced plasma belongs to a class of RF and microwave induced plasmas. It results from the propagation of an electromagnetic wave which uses the plasma column it sustains and the plasma tube as its sole propagating media. This type of plasma offers several advantages compared to the positive column plasma of dc discharges or to other RF and microwave produced plasmas. Surface wave plasmas require no internal electrodes, and they can be applied over an extremely broad range of wave frequencies (27 MHz to 10 GHz demonstrated) and gas pressures (about 10^–4 Torr to a few times the atmospheric pressures). Using the surface wave plasma technique, a large variety of plasma column diameters have been created (0.5–150 mm demonstrated) and no limitation on plasma column length (column up to 6 m long demonstrated) has been found. The surface wave produced plasma is used in elemental analysis and to sustain emission in lasing media. This article is intended as a guide for potential users of surface wave plasmas in the field of plasma processing and plasma chemistry.     

The characterization of silica microparticles by electrophoretic mobility measurements

Summary Electrophoretic mobility measurements in the pH 2‐10 range are described for several commercial HPLC silica microparticles and a laboratory-produced product. The content of metal impurities for the silicas was also determined by AAS. An acidic/hydrothermal treatment was used to generate a more homogenous surface for some of the silicas. The zero points of charge (zpc) for both a native and a treated silica plus several commercial HPLC silicas were compared. The electrophoretic mobility method may be useful in predicting the utility of certain types of silica supports for chromatographic separations.