First-principle studies on the electronic structure of Fe3O4(110) surface

The first-principle was employed to study the six possible models for the Fe₃O₄(110) surface, namely the AB-terminated surface (AB model), the AB-terminated with Fe_A vacancy (AB-Fe_A vac model), the AB-terminated with Fe_B vacancy (AB-Fe_B vac model), the B-terminated surface (B model), the B-terminated surface with Fe_B vacancy (B-Fe_B vac model) and the B-terminated surface with O vacancy (B-O vac model). The stability, the electronic structure and the magnetic properties of the six surface models were also calculated. The results predict that the B-O vac model is more stable than other types of surface models. The half-metallic property remain in the AB and B models, while the other four surface models exhibit metallic properties. At the same time, the AB, AB-Fe_A vac, AB-Fe_B vac, B and the B-Fe_B vac models have ferrimagnetic properties, while the B-O vac model has antiferromagnetic property.      

基于孔口出流模型的实验研究及理论分析

基于孔口出流模型对底部有小孔的圆柱体容器中液体液面高度随时间的变化规律进行了实验研究,并通过计入液体表面张力引起的孔口收缩和流体黏滞力导致的能量损失对实验结果进行了理论分析,与实验结果一致.     

基于白光干涉彩色图像的微结构表面形貌测量

微结构的表面形貌会显著地影响微纳器件的使用性能及产品质量,是微纳测试领域的一个重要研究方面,利用白光干涉技术是测量物体表面形貌的一种常见方法。区别于常用的CCD黑白相机,使用CCD彩色相机采集白光干涉条纹的彩色图像,使获取的图像包含了R、G、B三个通道的信息。利用小波变换法分别求解出在不同扫描位置处R、G、B通道的相位信息,通过建立的评价函数,并结合最小二乘法可精确确定零光程差的位置,利用相对高度和零光程差位置的线性关系,进而得到物体的表面形貌。通过仿真以及实际测量由VLSI标准公司制造的标准台阶结构,验证了所提出方法的有效性。     

A study on the distribution of adsorbed nanoparticles

We use Monte Carlo simulation to calculate the distributions of particles under adsorption force near planar and cylindrical surfaces,respectively.Both hard sphere interaction and repulsive Yukawa (screened coulomb) interaction are employed in our simulations.We study the influence of the inter-particle potentials.The difference between the MC simulation results and the analytical results of ideal gas model shows that the interaction between particles plays an important role in the density distribution under external fields.Moreover,the 2-dimensional constructions of particles close to the surface are studied and show relations of the interaction between particles.These results may indicate us how to improve the methods of building nanoparticle coatings and nano-scale patterns.     

采用(meta)-GGA泛函对Ag(111)、Rh(111)和Ir(111)上乙烯吸附的理论研究

本文针对在多种催化反应的重要中间体乙烯,使用(meta)-GGA等级的包含PBE,BEEF-vdW,SCAN以及SCAN+rVV10在内的多种交换关联泛函,系统研究了在过渡金属表面(Ag,Rh和Ir)上乙烯吸附势能面对泛函的依赖关系. 研究发现,对于乙烯在贵金属Ag(111)上的吸附,除了PBE外,BEEF-vdW,SCAN以及SCAN+rVV10均能预测出物理吸附态的存在. 对于乙烯在Rh(111)面的吸附,SCAN和SCAN+rVV10预测在化学吸附位之前存在有物理吸附前驱态,而基于PBE和BEEF-vdW的势能面并没有发现前驱态的存在. 而对于乙烯在Ir(111)上的吸附,BEEF-vdW也能微弱地预测出化学吸附前驱态的存在. 研究结果表明,无论在哪一种金属表面上,四种泛函中SCAN+rVV10给出的吸附能最强,其次是SCAN,最后是PBE或者BEEF-vdW.     

Preparation of nano-hydroxyapatite/poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide) biocomposite microspheres

Nano-hydroxyapatite (HA)/poly(l-lactide) (PLLA) composite microspheres with relatively uniform size distribution were prepared by a solid-in-oil-in-water (s/o/w) emusion solvent evaporation method. The encapsulation of the HA nanopaticles in microshperes was significantly improved by grafting PLLA on the surface of the HA nanoparticles (p-HA) during emulsion process. This procedure gave a possibility to obtain p-HA/PLLA composite microspheres with uniform morphology and the encapsulated p-HA nanoparticle loading reached up to 40 wt% (33 wt% of pure HA) in the p-HA/PLLA composite microspheres. The microstructure of composite microspheres from core-shell to single phase changed with the variation of p-HA to PLLA ratios. p-HA/PLLA composite microspheres with the diameter range of 2–3 μm were obtained. The entrapment efficiency of p-HA in microspheres could high up to 90 wt% and that of HA was only 13 wt%. Surface and bulk characterizations of the composite microspheres were performed by measurements such as wide angle X-ray diffraction (WAXD), thermal gravimetric analysis (TGA), environmental scanning electron microscope (ESEM) and transmission electron microscopy (TEM).     

二维表面浮雕结构的矢量衍射分析

利用等效介质理论,通过严格的耦合波理论计算和分析了二维表面浮雕结构的反射效率与各种因素的关系,给出了不同情况下的变化曲线;同时计算出了该结构在正入射情况下的等效折射率系数。明确提出：不管是对称的还是非对称的二维表面浮雕结构,方位角和极化角的变化对其反射率的影响都不明显;从而得出二维表了雕结构可以实现消偏振、减反的特性。分析了该结构的带宽限制,给出了在给定结构下受限的带宽;同时对浮雕高度加工误差对反射率的影响作了分析,对实际工作有一定的指导意义。     

纳米通道内超疏水性表面气泡的运动

疏水表面纳米气泡的运动有重要的应用价值和研究意义。本文采用分子动力学方法,模拟了纳米通道壁面为超疏水性时壁面上气泡的运动状况。在质量力驱动下,随着外界驱动力的增大,两壁面上的气泡被逐渐拉长,同时逐渐变得扁平;前端"接触角"逐渐增大,而后端"接触角"逐渐减小。纳米通道内疏水性表面的纳米气泡随着外部驱动力的变化呈现出不同的形态,变化程度随着驱动力的增大而增大。在不同驱动力作用下,两个气泡总是保持相同的速度,气泡的速度与外力驱动的大小呈线性增长趋势。随着外力的增大,边界层及通道中心速度皆呈现增大趋势。     

粗糙海面对高斯分布激光光束的反射模型推导

研究激光光束海面反射光强的方向分布特性对海上光电对抗等领域的工程实践具有重要意义.本文采用分形方法模拟粗糙海面,并在海面基准坐标系中建立起描述粗糙海面几何特征的数学方程,然后基于蒙特卡罗方法模拟高斯光束,依据几何光学原理在基准坐标系下推导了高斯光束的海面反射模型,采用该模型可以编程计算激光光束海面反射光强的方向分布.将模拟计算结果与实验结果进行了对比分析,结果表明该模型可以较好地反映激光光束海面反射光强的分布趋势,验证了模型的有效性.     

微粗糙结构表面液滴浸润特性的多体耗散粒子动力学研究

超疏水表面因其优异的自洁作用一直是表面科学领域关注的重点.本文使用多体耗散粒子动力学(many-body dissipative particle dynamics, MDPD)方法模拟研究了不同粗糙结构下液滴的浸润特性, 并与Cassie-Baxter理论进行了对比. 研究使用了一种具有长吸短斥作用的流固作用函数来获得不同的液滴浸润性, 并利用一种简洁的数值方法来测量接触角. 模拟结果表明本研究方法能够稳定地捕捉到液滴在粗糙表面的静态和动态特性. 模拟了粗糙结构对三相接触线运动的黏滞作用, 与物理实验结果相符合, 表明Cassie-Baxter理论在实际应用中尚存在一定局限性. 研究分析了在动态铺展过程中的能量转化关系, 并指出在低值表面容易引起液滴反弹.