头盔式单目微光夜视仪中光学系统的设计

为提高头盔式单目微光夜视仪中光学系统的成像质量，并满足夜视仪结构紧凑、质量小的指标要求，提出在微光夜视仪光学系统设计中引入高次项非球面透镜的设计方法。针对具体的头盔式微光夜视仪，根据微光物镜、目镜系统技术参数计算理论，确定该微光夜视仪光学系统的技术参数，应用光学设计软件ZEMX上机调试，并在光学系统设计中引入高次非球面透镜，使物镜系统镜片数由原来的9片减少为6片，目镜系统由原来的9片减少为7片，简化了结构，并提高了成像质量。设计结果表明：在头盔式微光夜视系统中采用非球面透镜可以提高系统成像质量，简化系统结构。     

圆锥透镜对偏轴球面波光束的衍射模式

球面波入射圆锥透镜产生的出射光束中心光斑直径较小且焦深长，适合通讯领域长距离测量和准直。针对实际操作中球面波光束入射时很可能与圆锥透镜的中心轴线发生偏移或倾斜，使衍射光场发生变化，着重研究圆锥透镜对偏轴球面波光束的衍射模式，并通过衍射理论和稳相法分析，研究其径向衍射光场的分布特性。使用半径为15mm，底角为1°的圆锥透镜进行计算机仿真和实验，最后将实验结果与理论分析和仿真结果相比较，证明球面波的曲率半径和出射光束的传输距离越小，偏轴对衍射模式的影响越小。该研究结果表明：在激光通讯等长距离通信中，使用曲率半径小的球面波光束代替平面波入射圆锥透镜，不仅可以扩展焦深，还可以降低偏轴对测量的影响。     

F-θ镜头的光学设计

介绍一种适合于激光打标的聚焦镜头－F-θ镜头的光学设计.通过引入桶形畸变，得到的F-θ镜头的像高与入射角成正比，可实现打标速度的线性控制.优化设计得到的工作面积达500×500 mm2的F-θ镜头，结构简单紧凑、聚焦性能达到衍射极限.     

减小球差的环带透镜设计

根据光线经过折射面后像距和折射面参数之间的关系,将折射面划分为若干同心圆环,各圆环之间沿光轴有一定的轴向间隔。一束平行于光轴的光线入射后,经过不同部分光线的像点相互重叠从而使球差减小。根据上述思想用单透镜构造一个透镜称为环带透镜,然后以环数为2的透镜为例用CODE V进行像差分析。和双胶合透镜比较得出:环带透镜的球差、波像差以及轴上点的弥散斑优于胶合透镜,同时光学传递函数指标提高,接近衍射极限。     

Development of cataract and corneal opacity in mice due to radon exposure

This work investigates the radiation damage on the eye of albino mice exposed to effective radon doses ranging from 20.92 to 83.68 mSv. These doses were taken over 2–8 weeks using a radon chamber constructed by the National Institute for Standard (Egypt). The guidance on the quality assurance program for radon measurements was followed. Therefore, the estimated doses received by the laboratory animals meet the requirements of national standard. The refractive index(RI) and protein concentration were measured for soluble proteins of both corneas and lenses. In addition, the sodium dodecyle sulfate polyacrylamide gel electrophoresis (SDSPAGE) technique was used. The results show increasing of the RI of both cornea and lens proteins and decreasing in total protein concentration of exposed animals. These results were accompanied with changes in the SDSPAGE profile for both cornea and lens. Therefore, radon exposure produces substantial hazards to the cornea and lens of experimental animals and has a crucial role in the development of cataract and corneal opacity.     

A variant of the isoperimetric problem,PartⅠ

This paper deals with the following isoperimetric problem in the plane:Among all regions with prescribed perimeter and covering a given line segment,what is the region that has the greatest area?     

Superiority of zoom lens coupling in designing a novel X-ray image detector

We design a novel X-ray image detector by lens coupling a Gd2O2S:Tb intensifying screen with a high performance low-light-level (L3,which often means luminescence less than 10-3 Lux) image intensifier.Different coupling effects on imaging performance between zoom lens and fix-focus lens are analyzed theoretically.In experiment,for designing a detector of 15-inch visual field,the system coupled by zoom lens is of 12.25-1p/cm resolution,while the one with fix-focus lens is 10 lp/cm.The superiority of zoom lens is validated.It is concluded that zoom lens preserves the image information better than fix-focus lens and improves the imaging system's performance in this design,which is referential to the design of other optical imaging systems.     

光学系统球心偏公差的优化制定方法

提出了一种简便、实用的制定光学系统球心偏公差的优化方法。     

An achromatic collimator for a multi-window flight simulator

Some flight simulators, known as multi-window simulators, are required to produce a wide field of view obtained by viewing a number of TV monitors through separate collimators. The extra requirement for shadowgraph projection of additional cueing information such as the sky and the horizon on to a dome above the pilot's head means that it is impossible to use the conventional concave mirror collimator. An alternative system is the Pancake Window but this gives insufficient light output.This paper describes the design of a three-element, all-plastic, one aspheric surface, achromatic, collimating lens which overcomes these problems. It is based on work carried out for the Royal Aircraft Establishment.     

光纤—自聚焦棒—反射器耦合系统的后向耦合系数

用光线矩阵方法推导了光纤-自聚焦棒-反射器在共轴耦合情况下的后向耦合系数;分析了它与耦合系统结构参数之间的关系.用计算机模拟画出了反射器为平面镜的系统的后向耦合系数和后向耦合损耗的曲线分布,计算曲线与实验结果大致符合.