Dependence of Crystal Quality and β Value on Synthesis Temperature in Growing Gem Diamond Crystals

High quality Ib gem diamond single crystals were synthesized in cubic anvil high-pressure apparatus （SPD- 6 × 1200） under 5.4GPa and 1230℃-1280℃. The （100） face of seed crystal was used as growth face, and Ni70Mn25Co5 alloy was used as solvent/catalyst. The dependence of crystal quality andβ value （the ratio of height to diameter of diamond crystal） on synthesis temperature was studied. When the synthesis temperature is between 1230℃ and 1280℃, theβ value of the synthetic high-quality gem diamond crystals is between 0.4 and 0.6. The results show that when theβ value is between 0.4 and O. 45, the synthetic diamonds are sheet-shape crystals; however, when theβ value is between 0.45 and 0.6, the synthetic diamonds are tower-shape crystals. In addition, when theβ value is less than 0.4, skeleton crystals will appear. When theβ value is more than 0.6, most of the synthetic diamond crystals are inferior crystals.     

Thickness Dependence of Resistivity and Optical Reflectance of ITO Films

Indium-tin-oxide （ITO） films deposited on crystalline silicon wafer and Corning glass are prepared by directcurrent magnetron sputtering method at room temperature with various thicknesses. The thickness dependences of structure, resistance and optical refectance of ITO films are characterized. The results show that when the film thickness is less than 40 nm, the resistivity and optical reflectance of the ITO film changes remarkably with thickness. The optoelectrical properties trend to stabilize when the thickness is over 55 nm. The GXRD result implies that the ITO film begins to crystallize if only the thickness is large enough.     

An Accurate Image Simulation Method for High-Order Laue Zone Effects

A completely different formulation for simulation of the high order Laue zone （HOLZ） diffractions is derived. It refers to the new method, i.e. the Taylor series （TS） method. To check the validity and accuracy of the TS method, we take polyvinglidene fluoride （PVDF） crystal as an example to calculate the exit wavefunction by the conventional multi-slice （CMS） method and the TS method. The calculated results show that the TS method is much more accurate than the CMS method and is independent of the slice thicknesses. Moreover, the pure first order Lane zone wavefunction by the TS method can reflect the major potential distribution of the first reciprocal plane.     

Molecular Dynamics Simulations of Helium Behaviour in Titanium Crystals

Molecular dynamics simulations are performed to investigate the behaviour of helium atoms in titanium at a temperature of 30OK. The nucleation and growth of helium bubble has been simulated up to 50 helium atoms. The approach to simulate the bubble growth is to add helium atoms one by one to the bubble and let the system evolve. The titanium cohesion is based on the tight binding scheme derived from the embedded atom method, and the helium-titanium interaction is characterized by fitted potential in the form of a Lennard-Jones function. The pressure in small helium bubbles is approximately calculated. The simulation results show that the pressure will decrease with the increasing bubble size, while increase with the increasing helium atoms. An analytic function about the quantitative relationship of the pressure with the bubble size and number of helium atoms is also fitted.     

Cs^＋-K^＋ Exchange in Z-Cut KTiOPO4 Crystal Covered with Chromium Masking Layer

Cs^＋-K^＋ ion exchanges are performed on z-cut KTiOPO4 crystals with chromium coating covered. The temperature of ion exchange is 430℃, and the time range from 15min to 30min. The dark mode spectra of the samples are measured by the prism coupling method. The channel structures on the samples are observed by a microscope and the near field pattern of the channel waveguides are measured by the end-fire coupling method. The refractive index of the samples increases and the increments at surface are modulated due to the existence of Cr film. In the region covered by Cr film, the refractive index of the samples at the surface increases dramatically in a shallow layer. The results of energy dispersive x-ray spectra indicate that in the region covered with Cr film, Cr ions participate in the ion exchange process, and enhance the refractive index. The results may provide a possibility that achieves index enhancement and Cr doping synchronically.     

Temperature Influence on Divergence Angles of Quartz Crystal Wollaston Prism

We propose a structural angle and main refractive indices as two key factors to understand the temperature influence on the divergence angles of the Wollaston prism. The temperature influence on the divergence angles of quartz crystal Wollaston prism is studied theoretically. The results show that divergence angles decrease with increasing temperature, while the divergence angle of e-light decrease more quickly than that of o-light. The testing system is established to verify the above results, and the experimental results are in agreement well with the theoretical analysis.     

An Artificially Garnet Crystal Materials Using In Terahertz Waveguide

A hypothesis is brought forward that the materials with low propagation loss in both optical and microwave band may exhibit good performance in terahertz （THz） band because THz wave band interspaces those two wave bands. For the purpose-of exploring a kind of low-loss material for THz waveguide, Lu2.1Bi0.9Fe5O12（LuBiIG） garnet films are prepared by liquid phase epitaxy （LPE） method on a gadolinium gallium garnet （GGG） substrate from lead-free flux because of the good properties in both optical and microwave bands. In microwave band, the ferromagnetic resonance （FMR） linewidth of the film 2△H = 2.8-5.1Oe; in optical band, the optical absorption coefficient is 600cm^-1 at visible range and about 100-170cm^-1 when the wavelength is longer than 800nm. In THz range, our hypothesis is well confirmed by a THz-TDS measurement which shows that the absorbance of the film for THz wave is 0.05-0.3 cm 1 and the minimum value appears at 2.3 THz. This artificial ferromagnetic material holds a great promise for magnetic field tunable THz devices such as waveguide, modulator or switch.     

Characteristics of Nd:YGG Laser Operating at 4F3/2-4I9/2

The laser properties of the Nd：YGG crystal are investigated. The absorption spectrum from 500 to 90Onto and emission spectrum from 850 to 1400nm of Nd：YGG are measured. As much as 1.35 W output power of fundamental laser operating at 935 and 938nm with a slope efficiency of 15.7% and 105mW output power of frequency doubled blue laser are successfully obtained.     

对高频声子的探测

晶体中的原子在其平衡点附近的摇晃会产生振动波,即声子．声子能在固体中传播声、热能和其他形式的能量,测量声子的性质可以提供有关晶体的结构以及原子间相互作用的各种信息．声子的性质一般是利用与光子的声一光相互作用来测定的．但当声波的波长小到只有原子间距的大小时,就很难利用声一光作用来探测声子了．因此,尽管有许多科学家都认为,在固体中已激发出了高频声子,但却无法用直接或间接的方法来精确地测定它们．     

光子晶体集成光电子器件

文章简要介绍了利用光子晶体实现微纳尺度上光调控的物理原理和工作机制,重点讨论了如何利用光子晶体的缺陷态实现微纳尺度的各种集成光电子器件,并结合文章作者所在研究组的研究工作经验,简单回顾了各种类型的集成光电子器件的工作原理、物理实现和光学特性.