一类[Os^（Ⅱ）（CO）3（tfa）（L）]（L=O^O，O^N，N^N）配合物的结构和光谱特征

采用密度泛函理论以及B3LYP方法和单激发组态相互作用(CIS)方法分别优化了一系列[Os(II)(CO)3(tfa)(L)](tfa为三氟乙酸;L=O^O(1),O^N(2),N^N(3),其中O^O为六氟乙酰丙酮,O^N为羟基喹啉,N^N为3-(三氟甲基)-5-(2-吡啶基)吡唑)配合物的基态和激发态结构.利用含时密度泛函理论(TD-DFT)结合极化连续溶剂化模型(PCM)计算了配合物在CH2Cl2溶液中的吸收和发射光谱.研究结果表明,优化得到的几何结构参数和相应的实验值符合得非常好,激发态几何构型相对基态变化较小,这与实验上观察到的较小的斯托克斯频移现象一致.配合物1-3的最低能吸收分别在342、431和329nm,其磷光发射分别在521、638和488nm.配合物1-3的最高占据分子轨道和最低空轨道主要表现为L配体的π和π*轨道特征,所以它们的最低能吸收归属于π-π*电荷跃迁,并混有少量的金属到配体的电荷跃迁(MLCT)和配体之间电荷跃迁(LLCT)微扰,且其高能吸收也表现为配体内部(IL)和配体间(LL)的电荷跃迁.此外,它们的磷光发射和吸收有相似的跃迁特征.     

Copper(II) complexes of 2-amino-5-chloro-3-fluoropyridine: syntheses and magnetic properties of (3,5-FCAP)2CuX2 and (3,5-FCAPH)2CuX4

Using 2-amino-5-chloro-3-fluoropyridine, two new copper halide coordination complexes and two new salts have been synthesized: [(3,5-FCAP)₂CuCl₂] (1), [(3,5-FCAP)₂CuBr₂](2), (3,5-FCAPH)₂[CuCl₄] (3) and (3,5-FCAPH)₂[CuBr₄] (4) [3,5-FCAP?=?2-amino-5-chloro-3-fluoropyridine; 3,5-FCAPH?=?2-amino-5-chloro-3-fluoropyridinium]. These complexes have been analyzed through single-crystal X-ray diffraction and temperature-dependent magnetic susceptibility. Compounds 1 and 2 crystallize in the triclinic space group P-1, while 3 and 4 crystallize in the monoclinic space group P2₁/c. All structures were distinct, with 1 giving a bihalide bridged chain, 2 yielding a halide bridged dimer, 3 forming a two-halide bridged chain via short Cl???Cl contacts, and 4 producing a rectangular sheet via short Br???Br contacts. All four compounds exhibit anti-ferromagnetic interactions and were fit to linear chain (1 and 3), dimer (2), and rectangular 2-D sheet (4) models. The resulting J/k_B values are ?3.4(1), ?31.3(8), ?0.9(1), and ?9.46(6)?K with an α value (α?=?J?/J) of 0.06(2), respectively.     

Luminescence Study of ZnS Quantum Dots Prepared by Chemical Method

We report synthesis of ZnS quantum dots by chemical method at room temperature. In this technique, ZnS quantum dots are produced by simple chemical reactions where zeolite, acts as matrix, plays the key role in controlling particle growth during synthesis. Quantum dots exhibit luminescence properties such as Zn²⁺ related emission, efficient low voltage electroluminescence, and super linear voltage-brightness EL characteristics. This study demonstrates the technological importance of semiconductor nanosystems prepared by low cost chemical route.     

Synthesis,Crystal Structure and Fluorescent Study of Bis(2-(2-hydroxyphenyl)benzimidazolate)zinc with Ethanol Solvate

Abstract  The zinc(II) complex with 2-(2-hydroxyphenyl)benzimidazole, namely [Zn(2-(2-hydroxyphenyl)benzimidazolate)₂]·C₂H₅OH (1 · C₂H₅OH) has been synthesized and characterized by X-ray crystallography and photoluminescent analysis. The complex crystallizes in monoclinic space group P2₁/c with cell parameters a = 10.156(1) ?, b = 25.771(3) ?, c = 9.674(1) ?, α = 90°, β = 103.641(2)°, γ = 90°, Z = 4, V = 2460.4(4) ?³. The central Zn(II) is four-coordinate and has a tetrahedral geometry. The steady-state and time-resolved photoluminescent spectra for the title compound have also been studied. The emission property can be ascribed to ligand-centered charge-transfer transition (LCCT) with π → π* property. Index Abstract   A new co-crystal of Zn(II) complex of 2-(2-hydroxylphenyl)benzimidazole with ethanol solvate has been prepared, characterized by X-ray crystallography and fluorescent studies.      

Influence of counter-anion on the coordination geometry of manganese(II) complexes with methyl-2-pyrazinecarboximidate ligand

Two new complexes of [Mn(2-MPyzCI)₂Cl₂].H²O (1) and [Mn(2-MPyzCI)₂(H₂O)₂](NO₃)₂ (2) were synthesized from the reaction of MnX₂.4H₂O (X=Cl^? and NO₃^?) with 2-cyanopyrazine in methanolic solution. The chelating methyl pyrazine-2-carboximidate (2-MPyzCI) ligand is formed via the methanolysis of 2-cyanopyrazine. Although coordination environment around manganes(II) ions is similar, but these complexes are different in geometrical position of 2-MPyzCI ligands. As both compounds are synthesized under the same reaction conditions, the only difference between these two complexes are counter ions and changing of geometrical position of ligands can be considered as a result of influence of the counter-anions on the molecular structures.     

Hydration of copper(II) amino acids complexes

Hydration of the copper(II) bis‐complexes with glycine, serine, lysine, and aspartic acid was studied by DFT and MD simulation methods. The distances between copper(II) and water molecules in the 1st and 2nd coordination shells, the average number of water molecules and their mean residence times in the hydration shells were calculated. Good agreement was observed between the values obtained and those found by DFT and NMR relaxation methods. Influence of the functional groups of the ligands and the cis–trans isomerism of the complexes on the structural and dynamical parameters of the hydration shells was displayed and explained. Analysis of the MD trajectories reveals the competition for a copper(II) axial position between water molecules or water molecules and the functional chain groups of the ligands and confirms the suggestion on the pentacoordination of copper(II) in such complexes. MD simulations show that only one axial position of Cu(II) is basically occupied at each time step while in average the coordination number more than 5 is observed. © 2017 Wiley Periodicals, Inc.     

On the use of edge cracked short bend beam specimen for PMMA fracture toughness testing under mixed-mode I/II

In this paper an inclined edge cracked short beam specimen subjected to symmetric three-point bend loading was designed and examined for conducting mixed-mode I/II fracture toughness experiments. The aspect ratio (i.e. length to width ratio) and the loading span distance are considered much lower than the other conventional cracked bend beam samples. Crack tip parameters such as stress intensity factors and T-stress were computed numerically for this specimen by several finite element analyses and it was demonstrated that the specimen is able to produce full combinations of mode I and II including pure mode II. The practical capability of the short bend beam specimen was studied experimentally by conducting a set of mixed-mode fracture tests on PolymethylMethacrylate (PMMA) as a well-known model brittle material. The critical stress intensity factors, the direction of fracture kinking and the path of fracture trajectory were investigated both experimentally and theoretically using two stress and strain-based fracture criteria. The fracture toughness of tested PMMA was decreased by moving towards mode II case due to the effect of T-stress on the fracture mechanism of the short bend beam specimen.     

Cobalt(II)-Catalyzed [4+2] Annulation of Picolinamides with Alkynes via C−H Bond Activation

A cobalt(II)-catalyzed [4+2] annulation of picolinamides with alkynes via C−H bond activation has been developed. The operationally simple annulation reaction allows for the synthesis of acyl-substituted 1H-benzoquinoline bearing multiple aromatic rings (up to 96 % yield) without co-oxidant or other oxidation factors under mild conditions. Several control experiments were carried out. This practical [4+2] annulation provides an efficient route to access highly functionalized compounds.     

Interplay of Antiferromagnetic Coupling and Spin Crossover in Dinuclear Iron(II) Complexes

This article reports on the study of the interplay between magnetic coupling and spin transition in 2,2′-bipyrimidine (bpym)-bridged iron(II) dinuclear compounds. Coexistence of both phenomena has been observed in [Fe(bpym)(NCS)₂]₂bpym, [Fe(bpym)(NCSe)₂]₂bpym and [Fe(bt)(NCS)₂]₂bpym (bpym = 2,2′-bipyrimidine, bt = 2,2′-bithiazoline) by the action of external physical factors namely pressure or electromagnetic radiation. Competition between magnetic exchange and spin crossover has been studied in [Fe(bpym)(NCS)₂]₂bpym at 6.3 kbar. LIESST experiments carried out in [Fe(bpym)(NCSe)₂]₂bpym and [Fe(bt)(NCS)₂]₂bpym at 4.2 K have shown that is possible to achieve dinuclear molecules with different spin states in this class of compounds. This revised version was published online in August 2006 with corrections to the Cover Date.     

数字图像注入式红外目标捕获跟踪训练仿真

介绍一种利用数字图像注入构建目标环境来完成目标捕获跟踪仿真训练任务的新方法,该方法通过模拟目标的理论航迹,实时接收并解算编码器输出值,同时与目标的运动方程做综合处理,计算出目标的位置信息,最后在背景中合成目标后按照红外图像的格式将数字图像注入到数字图像处理系统中。该方法可以在不开启红外相机的情况下,方便地完成手动及自动跟踪的训练任务,节约了训练成本,并已成功运用到某光电跟瞄设备的仿真训练系统中。