Thermodynamics of liquid mixtures containing n-alkanes and strongly polar components: VE and C P E of mixtures with either pyridine or piperidine

Excess molar volumes V _E and excess molar heat capacities C _P ^/E at constant pressure have been obtained, as a function of mole fraction x₁, for several binary liquid mixtures belonging either to series I: pyridine+n-alkane (C_lH_2l+2), with l=7, 10, 14, 16, or series II: piperidine+n-alkane, with l=7, 8, 10, 12, 14. The instruments used were a vibrating-tube densimeter and a Picker flow microcalorimeter, respectively. V ^E of pyridine+n-heptane shows a S-shaped composition dependence with a small negative part in the region rich in pyridine (x₁>0.90). All the other systems show positive V ^E only. The excess volumes increase with increasing chain length l of the n-alkane. The excess molar heat capacities of the mixtures belonging to series II are all negative, except for a small positive part for piperidine+n-heptane in the region rich in piperidine (x₁>0.87). The C _P ^/E at the respective minima, C _P ^/E (x_1,min ), become more negative with increasing l, and the x_1,min values range from about 0.26 (l=7) to 0.39 (l=14). Most interestingly, mixtures of series I exhibit curves of C _P ^/E against x₁ with two minima and one maximum, the so-called W-shape curves.Dedicated to Professor A. Néckel on the occasion of his 65^th birthday. Communicated in part at the XVII^èmes Journées de Calorimétrie, d'Analyse Thermique et de Thermodynamique Chimique, Ferrara, Italy, 27–30 October, 1986.     

Comparative evaluation of Fe(III) reducing power-based antioxidant capacity assays in the presence of phenanthroline, batho-phenanthroline, tripyridyltriazine (FRAP), and ferricyanide reagents

The chemical diversity of antioxidants in complex matrices such as plant extracts makes it difficult to separate and quantify antioxidants from these solutions. Therefore it is desirable to establish methods that can measure the total antioxidant capacity (TAC) levels directly from plant extracts. Iron(III)-based TAC assays, especially the most widely used FRAP (ferric-reducing antioxidant power), play an important role in this regard. However, many problems have been reported in the application of the FRAP assay, the most serious one being the incomplete oxidation of a number of antioxidants during the time protocol of the assay. Thus, six different ferric ion-based total antioxidant capacity (TAC) assays have been comparatively tested, modified, and improved so as to obtain more sensitive and precise results for complex mixtures, namely: 1,10-phenanthroline (o-phen) method (with incubation), batho-phenanthroline method (with incubation), original FRAP method, modified FRAP method (with incubation), original ferricyanide method, and modified ferricyanide method (with incubation). Two new assays in this regard (i.e., o-phen and batho-phen) have been established, and the existing assays (FRAP and ferricyanide) have been modified so as to let the oxidation reactions of antioxidants reach completion. The molar absorptivity for a variety of antioxidants was highest for modified FRAP, batho-phen, and original FRAP methods. The absorption maximum wavelength shifted batochromically to a higher extent for modified ferricyanide, FRAP, and batho-phen procedures, decreasing the possibility of interferences due to organics absorbing in the near-UV range of the visible spectrum where most antioxidant assays are performed. The linear concentration ranges were shown to be further extended and linear correlation coefficients improved with respect to the most widely used ferric-based assay, FRAP. Of the six assays tested and developed, only the modified ferricyanide procedure gave high intercept values and low addivitity of TAC values of constituents in complex mixtures, requiring further attention of method optimization. Thus, it was shown that the most widely used FRAP could be effectively modified, and o-phen, batho-phen, and ferricyanide methods constitute cheaper alternatives to FRAP under certain conditions, with partly improved molar absorptivity (and thus sensitivity) for antioxidants, lower intercept values (and higher precision), broader linear range (and higher flexibility), and better additivity of TAC values of antioxidant constituents in mixtures.     

Development of a formulation of Pirodavir using 2-hydroxypropyl-β-cyclodextrin

Pirodavir, 4-[2-[1-(6-Methyl-3-pyridazinyl)-4-piperidinyl]ethoxy]benzoic acid ethyl ester, is an antiviral compound which has low aqueous solubility (<0.01 mg/ml). The compound is a weak base (pKa 5.8) with high lipophicity (logP 4.44). Ionization of the compound increases the solubility in acidic medium to 2.3 mg/ml at pH 2.4. However, a low pH is not acceptable for nasal application as this would induce irritation. Extensive solubility studies were performed using different types of substituted cyclodextrins in order to select an appropriate derivate capable of increasing solubility to an acceptable level for formulations for nasal application. Aqueous solubility of pirodavir increased in a linear fashion with increasing concentration of most of the substituted cyclodextrins. However, using 2-hydropropyl-β-cyclodextrin (HPBCD) the solubility increased in a non-linear fashion. Based on these studies HPBCD was selected as the most appropriate excipient. To support a clinical study on the treatment of rhinovirus cold by intranasal Pirodavir formulations were developed containing up to 5 mg/ml of pirodavir and up to 10% of HPBCD. Stability of the formulations was studied and found to be acceptable.     

Practical limitations of capillary gas chromatography

Glass capillary gas chromatography is a high resolution separation method which allows the qualitative and quantitative analysis of even complex mixtures, which may contain many components–also isomeric–in a wide range of volatilities, polarities and concentrations. The principal limitation of gas chromatographic application is given by an insufficient volatility of the species to be separated. Elevated temperatures have to be applied if the application range is to be extended and to achieve steep peak profiles, i.e. low detection limits at high resolution. The use of elevated temperatures is limited, of course, by the temperature stability of both the solvent (stationary liquid and support) and the solutes. The problems of trace analysis for low volatility compounds at high resolution and its limitational parameters regarding sampling, separation and detection are discussed. The applicability of glass capillary columns in this field is influenced by the following parameters: tailing behaviour; irreversible adsorption of polar and decomposition of unstable solutes; thermal stability of stationary liquid (including the support deactivation); separation efficiency and sample capacity (film thickness). Multidimensional gas chromatography using capillary columns coupled either with a packed or another capilllary column for preseparations may be applied with advantage in the analysis of complex mixtures.     

乙醇和甲苯组成的最低共沸混合物热力学性质的研究

The molar heat capacity of the azeotropic mixture composed of ethanol and toluene was measured by a high precision adiabatic calorimeter from 80 to 320 K. The glass transition and phase transitions of the azeotropic mixture were determined based on the heat capacity measurements. A glass transition at 103.350 K was found. A solid-solid phase transition at 127.282 K, two solid-liquid phase transitions at 153.612 and 160.584 K were observed, which correspond to the transition of metastable crystal to stable crystal of ethanol and the melting of ethanol and toluene, respectively. The thermodynamic functions and the excess ones of the mixture relative to the standard temperature 298.15 K were derived based on the relationships of the thermodynamic functions and the function of the measured heat capacity with respect to temperature.     

Heat capacities and volumes of transfer of cholesteryl oleyl carbonate into various solvents

Heat capacities C _p and volumes V have been obtained at 25°C for the transfer of cholesteryl oleyl carbonate (ChOC) from a reference solvent, the highly-branched alkane 2,2,4,4,6,8,8-heptamethylnonane into various solvents. These include normal, branched, and cyclic alkanes as well as the pure cholesteric ChOC. V and most C _p are associated with the change of environmental free volume during the transfer process and are predicted by the Prigogine-Flory theory. However, for n-alkane solvents with more than twelve carbons, C _p is large, positive, and unattributable to free volume changes. It is consistent with a restriction of alkane segmental motion by the ChOC. The same mechanism has been proposed to explain an antiplasticization effect of ChOC on transitions in polymers.     

丁磺酸内酯对锂离子电池性能及负极界面的影响

用循环伏安(CV)、电化学阻抗谱(EIS)、扫描电镜(SEM)、能谱分析(EDS)及理论计算等方法研究了添加剂丁磺酸内酯(BS)对锂离子电池负极界面性质的影响. 研究表明, 在初次循环过程中, BS具有较低的最低空轨道能量, 优先于溶剂在石墨电极上还原分解, 并形成固体电解质相界面膜(SEI膜). 在含BS的电解液中形成的SEI膜的热稳定性高, 在70 ℃下储存24 h后, 膜电阻和电荷迁移电阻大小基本保持不变, 而在不含BS的电解液中形成的SEI膜的热稳定性较差, 在70 ℃下储存24 h后, 膜电阻和电荷迁移电阻大小有明显的增加. 从BS对锂离子电池电化学性能影响的研究表明, 加入少量的BS能够显著提高锂离子电池的室温放电容量、低温及高温储存放电性能.     

Heat capacities of aqueous solutions of amino acid and dipeptide derivatives of fullerene

The concentration dependences of heat capacities of aqueous solutions of several amino acid and peptide derivatives of fullerene were measured by scanning differential calorimetry at 298 K. The heat capacities for the arginine, alanylalanine, and glycylvaline derivatives dissolved in water depend slightly on concentration. The concentration dependences of the heat capacities of aqueous solutions of the serine and alanine derivatives display extrema. The calculated contributions of hydration to the heat capacities of the dissolved fullerene derivatives have both positive and negative signs. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2202–2204, November, 1998.     

Ionization of five aqueous fluorobenzoic acids: Conductance and thermodynamics

The three monofluorobenzoic acids together with 2,4-difluoro and 2,6-difluorobenzoic acids in aqueous solution are the subject of precision conductance measurements. The experimental data are analyzed to give ionization constants and limiting conductances at temperatures from 0 to 100°C. Walden products for the acid anions are derived from the limiting conductances while the ionization consatants are fitted by statistical methods to the function pK _a (m)=A+B/T+ C logT+DT. Only the 2,6- acid requires the fourth term of the function to fit the data to a precision of better than 0.03%. Mathematical analysis of the pK function gives the standard changes in enthalpy, entropy, and heat capacity. All the acids studied are more acidic than the parent, benzoic acid, as well as more acidic than the isoelectronic methylbenzoic acids. In general the increased acidity is tied to decreases in enthalpy while entropy changes on ionization differn little from those found for the parent acid.     

The thermal properties of poly(oxy-1,4-benzoyl), poly(oxy-2,6-naphthoyl), and its copolymers

The thermal properties, i.e., heat capacity, enthalpy, entropy, and Gibbs function, and the transition behavior of the copolymer system of 4-hydroxybenzoic acid and 2,6-hydroxynaphthoic acid have been studied based on differential scanning calorimetry. The heat capacities of the glass, crystal, and anisotropic melt are shown to be largely additive on a molar basis. Additivity is lost in the two transition regions, glass transition and disordering transition. Isothermal crystallization experiments on the copolymers revealed the existence of two types of crystals which melt at high temperature (fast-grown crystals) and low temperature (slowly grown crystals). The ATHAS computation method is used to bring heat capacities of the solid state into agreement with approximate frequency spectra. The changes in heat capacity at the glass transitions occur at 434°K for the poly(oxy-1,4-benzoyl) [33.2 J/(K mol)] and at 420°K for poly(oxy-2,6-naphthoyl) [46.5 J/(K mol)]. The copolymers have a transition range of above 100°K. The anisotropic melt is linked to the well-known condis state of poly(oxy-1,4-benzoyl) by a continuous changes in disorder and mobility without an additional first-order transition.