Preparation of solutions of amidomagnesium chlorides in poly(ethylene oxide) and their characterization by conductivity measurements

Polymer electrolyte systems were prepared for the first time by dissolution of amidomagnesium chlorides in poly(ethylene oxide), (PEO). For the preparation, solutions of (hexamethyldisilylamido)magnesium chloride, (dimethylpyrrolyl)magnesium chloride, (diisopropylamido)magnesium chloride, piperidinomagnesium chloride and morpholinomagnesium chloride were chosen. The composition of these polymer electrolyte systems corresponds to the general formula R₂NMgCl·P(EO)_n·THF. Most work has been done with the system (hexamethyldisilylamido)magnesium chloride in PEO, (Me₃Si)₂NMgCl·P(EO)_n·THF, with n= 3, 4, 5, or 7. The electrolytes have a soft rubber-like consistency. At 30 °C, electrical conductivities of 10⁻⁶–10⁻⁵ S/cm were found. The conductivities were measured in the temperature range 20–60 °C. Within this temperature range a linear dependence of the logarithms of the conductivity on the inverse temperature was found and activation energies for the conducting process of 30–60 kJ/mol were calculated. Using those polymer electrolytes with a high content of the amidomagnesium compound, a reversible magnesium deposition takes place by cathodic reduction at potentials below −1.9 V vs. a Ag/AgCl reference electrode. These polymer electrolytes were found to be stable against oxidation up to about −0.3 V vs. Ag/AgCl. Electronic Publication     

Simple evaluation of Franck–Condon factors and non‐Condon effects in the Morse potential

The calculation of Franck–Condon factors between different 1‐D Morse potential eigenstates using a formula derived from the Wigner function is discussed. Our numerical calculations using a simple program written in Mathematica are compared with other calculations. We show that our results have a similar accuracy as those calculations performed with more sophisticated methods. We discuss the extension of our method to include non‐Condon effects in the calculation. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem 88: 280–295, 2002     

APPLICATION OF MSW-X_α METHOD WITH OVERLAPPING ATOMIC-SPHERE TO IONIZATION POTENTIALS FOR SOME PLANAR ORGANIC MOLECULES

Application of multiple scattered-wave X_α method with overlapping atomic-sphere to ionization potentials is reported for benzene, pyridine, pyrazine, pyrrole and imidazole. The calculated results show that the orbital charges in the intersphere region are non-negative and the energy levels get improvements in orderings.     

分子筛模型中非骨架离子位置的研究

从理论上研究了非骨架阳离子可能的分布位置．计算了分子筛晶体基本结构单元在整个空间的静电势分布，找出空间中静电势的各个极小点．在静电势最低点逐个放置钠离子，优化，重新计算模型分子筛的电势分布．研究了阳离子放置过程中静电势变化的趋势．     

胺、醇、醚类化合物电离能的自相关拓扑研究

原子的染色序数 fi 定义为 :fi=gi·xi,式中 gi 为原子i在分子中的序数 ,xi 为其染色系数 .基于fi 建立改进的原子序数自相关拓扑指数mF ,其中的1F对烷烃及其衍生物具有良好的结构选择性 .使用第一电离能 (Ip)与0 F ,1F的数量关系模型对 32种脂肪族胺、醇、醚进行估算、预测 ,结果令人满意     

Coupling between polymer adsorption and colloidal particle aggregation

Studies of the adsorption of high molecular weight polymers on colloidal latex and silica particles and their subsequent flocculation were carried out. Neutral polyethylene oxide samples with both a narrow and a broad molecular weight distribution were used together with low charged cationic copolymers. The influence of the particle concentration and polymer dose on the flocculation were systematically investigated under quiescent conditions.Equilibrium bridging only occurred with polyelectrolyte, even in very dilute suspensions, at high particle coverage. In contrast to this, non-equilibrium bridging occurred with both neutral polymer and polyelectrolytes but only for more concentrated suspensions and small amounts of adsorbed polymer. Polymer adsorption in dilute suspensions, which did not show particle aggregation was measured an electrophoretic technique. In more concentrated suspensions, where flocculation takes place, we found that aggregation prevents further polymer adsorption and induces both an excluded volume and a surface effect. The consequences on the shape of the isotherms differ according to the aggregation mechanism.A significant decrease of the amount, , of adsorbed polymer is observed with non-equilibrium bridging. When both mechanisms simultaneously contribute to the aggregation, the value of depends on their relative importance. In the intermediate range of copolymer dose their respective contributions are critically sensitive to the details of the mixing step and stirring, leading to non reproducible experimental results.     

M~＋＋BrCN─→MCN~＋＋Br气相反应的从头算研究

Ｍ~＋＋ＢｒＣＮ─→ＭＣＮ~＋＋Ｂｒ气相反应的从头算研究朱荣顺，戴树珊（云南大学化学系，昆明，６５００９１）关键词气相反应，过渡金属阳离子，溴化氰，从头算，相对论赝势对过渡金属离子与一些小分子的气相反应已有大量的实验和理论研究［１～５］，ＭｉｃｈｅｌＳ...     

Molecular structure of mixed adsorption layers surfactant—polymer at a liquid—liquid interface

Isotherms of the binding of dodecyl sulfate anions (DDS^–)and Na⁺ counterions during their coadsorption with a nonionic polymer. proxanol (PR). at the interface of dodecane-water emulsions have been measured by conductometry and Na-selective potentiometry. The adsorption of DDS^– and PR is concurrent. The affinity constant of PR to the interface determined by the Langmuir model decreases as the concentration of PR increases, and the surface concentration of DDS^– tends to a nonzero limiting value at high concentrations of PR. The surface (_o) and electrokinetic () potentials at the interface have been determined at various polymer concentrations by the spin probe and electrophoresis methods. The average dielectric permeability and density of polymer segments in We adsorption layer have been determined by ESR. The lower boundary of the hydrodynamic thickness of the polymer adsorption layer at the interface has been estimated from the dependences of _o and on the ionic strength.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1653–1661, July, 1996.     

Second Dissociation Constants of 4-[N-morpholino]butanesulfonic Acid and N-[2-hydroxyethyl]piperazine-N′-4-butanesulfonic Acid from 5 to 55°C

The values of the second dissociation constant, pK ₂, for the dissociation of the NH⁺ charge center of the zwitterionic buffer compounds 4-(N-morpholino)butanesulfonic acid (MOBS), and N-(2-hydroxyethyl)piperazine-N-4-butanesulfonic acid (HEPBS) have been determined from 5 to 55°C, including, 37°C at intervals of 5°C. The electromotive-force (emf) measurements have been made utilizing hydrogen electrodes and silver–silver chloride electrodes. The value of pK ₂ for MOBS was found to be 7.702 ± 0.0005, and 8.284 ± 0.0004 for HEPBS, at 25°C, respectively. The related thermodynamic quantities, G ^o, H ^o, S ^o, and C _p ^o for the dissociation processes of MOBS and HEPBS have been derived from the temperature coefficients of pK ₂. Both the MOBS and HEPBS buffer materials are useful as primary pH standards for the control of pH 7.3 to 8.6 in the region close to that of physiological fluids.