拼接子镜系统计算机辅助装调研究

为了提高拼接子镜系统的装调精确度,研究了拼接子镜系统的计算机辅助装调技术,分析了拼接子镜系统的计算机辅助装调模型,采用反向优化法编写程序求解系统失调量.以37项泽尼克系数作为评价函数.当粗调误差在0.7°以内时,完全可以精确求解失调量.结果表明,求解结果准确度高,符合实际装调要求.     

20单元双压电片变形镜对Zernike像差空间拟合能力的实验研究

利用20单元双压电片变形镜和13×13阵列哈特曼波前传感器所构成的闭环自适应光学系统,实验测试了双压电片变形镜对3～20项静态Zernike像差的空间校正能力,并将实验结果与仿真计算结果进行了对比.最后分析了哈特曼传感器与双压电片变形镜之间的对准误差对实验结果的影响.研究表明,除了少数几项外,双压电片变形镜对3～20项Zernike像差的拟合误差都小于0.5,各项Zernike仿真和实验结果之差平均小于0.1.计算表明,与严格对准的理想情况相比,双压电片变形镜对3～20项Zernike像差中大多数项的拟合误差都随着失配程度的增加而增大,对准精度对于高阶像差拟合效果的影响尤其严重.     

Pattern classification by using improved wavelet Compressed Zernike Moments

In this paper, an improved Feature Extraction Method (FEM), which selects discriminative feature sets able to lead to high classification rates in pattern recognition tasks, is presented. The resulted features are the wavelet coefficients of an improved compressed signal, consisting of the Zernike moments amplitudes. By applying a straightforward methodology, it is aimed to construct optimal feature vectors in the sense of vector dimensionality and information content for classification purposes. The resulting surrogate feature vector is of lower dimensionality than the original Zernike moment feature vector and thus more appropriate for pattern recognition tasks.Appropriate validation tests have been arranged, in order to investigate the performance of the proposed algorithm by measuring the discriminative power of the new feature vectors despite the information loss.     

基于Shark-Hartmann理论的波前探测技术研究

精确的波前探测是反射镜面型检测及光束波前畸变测量的重要依据,论文根据Shark-Hartmann理论对波前探测技术进行了模拟和实验研究。将平行光经过球面透镜/柱面透镜后形成的球面波/柱面波作为探测波前。实验采用商用的微透镜阵列和CCD搭建Shark-Hartmann传感器,利用实际光束作为参考光,避免了参考光的不准直性对实验的影响。模拟计算结果表明平均曲率误差为13.423 mm,实验结果实现了对球面/柱面/倾斜波的探测及复原。     

三维荧光光谱结合Zernike图像矩快速鉴别掺伪芝麻油

为了实现对掺伪芝麻油的快速鉴别,应用FS920荧光光谱仪测定样品的三维荧光光谱数据。将三维荧光光谱图视为灰度图,在没有任何预处理的前提下,直接应用Zernike图像矩提取三维光谱灰度图的特征信息,然后采用类平均法对特征信息进行聚类分析,从定性角度实现掺伪芝麻油的鉴别,并解析其组成成分。最后应用广义回归神经网络(GRNN)对掺伪样本的成分进行定量分析。聚类分析能够以很高的辨识率来识别掺伪芝麻油,并能够正确解析其组成成分。定量模型预测了2组掺伪样本中各成分的相对体积,其平均相对误差分别为2.23%,8.00%,9.70%和9.70%。分析结果表明,Zernike矩能够有效提取光谱的特征信息,光谱数据的Zernike矩特征结合聚类分析以及GRNN模型能够获得良好的定性和定量分析结果,为掺伪芝麻油的鉴别提供了一种新的方法。     

数值模拟抽运分布对端泵激光器晶体热透镜球差的影响

为了研究端面抽运情况下,激光晶体在不同分布的抽运光抽运时热透镜球差的变化,通过对稳态热传导方程和Zernike多项式的求解,建立了热透镜球差与抽运光强度分布的模型,对模型进行了理论分析和仿真研究,并对仿真结果做了进一步理论和仿真分析.结果表明:在相同的抽运功率下,二阶超高斯分布抽运光抽运时球差最大,且随着抽运分布系数k的增大(除高斯分布外)球差逐渐减小;随着抽运功率的增加,抽运分布系数k对球差的影响逐渐加重,且不同分布系数k所产生的球差差距逐渐增大;并对二阶超高斯分布抽运光抽运得到最强激光功率的照射范围进行了理论分析和仿真分析,得知在相同抽运功率下,二阶超高斯分布抽运光得到最强激光功率的范围最宽为0.30—0.63倍高斯半径.     

Phase compensation in non-Kolmogorov atmospheric turbulence

Zernike polynomial decompositions are used for investigating phase distortion induced by atmospheric turbulence in optical systems. Closed-form expression of the Zernike-coefficient variances is derived. The finite size of the receiver aperture is analyzed using the filter function which is also particularly effective in the theoretical analysis of lower-order aberrations like tilt terms and piston-removed phase variance. The outer scale of the non-Kolmogorov turbulence is considered. The result shows that the effect of finite outer scale attenuates low-order Zernike mode of optical distortion and longer outer scale can lead to more energy in the tilt terms. The generalized exponent can only enhance tilt terms and attenuate other Zernike modes of optical distortion. Further, for different outer scale and generalized exponent, the residual phase variance decreases with more modes of phase compensation.     

Towards tender X‐rays with Zernike phase‐contrast imaging of biological samples at 50 nm resolution

X‐ray microscopy is a commonly used method especially in material science application, where the large penetration depth of X‐rays is necessary for three‐dimensional structural studies of thick specimens with high‐Z elements. In this paper it is shown that full‐field X‐ray microscopy at 6.2 keV can be utilized for imaging of biological specimens with high resolution. A full‐field Zernike phase‐contrast microscope based on diffractive optics is used to study lipid droplet formation in hepatoma cells. It is shown that the contrast of the images is comparable with that of electron microscopy, and even better contrast at tender X‐ray energies between 2.5 keV and 4 keV is expected.     

二次曲面前房型有晶体眼人工晶体的球差矫正特性分析

为探究二次曲面前房型有晶体眼人工晶体的球差矫正特性,进行了球面和二次曲面有晶体眼人工晶体的设计,并利用像差理论对二者的球差矫正特性进行了研究.基于R.Navarro等人提出的模型眼得到屈光不正眼模型,利用ZEMAX光学软件分别设计了可矫正屈光不正人眼的球面与二次曲面前房型有晶体眼人工晶体.通过对光学传递函数和Zernike球差系数的比较,以及对Seidel球差分布系数的计算分析发现:在保证屈光不正矫正至正常水平的前提下,较之传统球面人工晶体,二次曲面的引入仅对远视眼的球差有矫正作用,并使光学传递函数显著改善|而对近视眼而言,二次曲面人工晶体的球差矫正效果与球面人工晶体相当.这一结论对前房型有晶体眼人工晶体的设计和应用具有重要的理论指导意义.     

改进的Zernike矩工业CT图像边缘检测

为提高工业计算机断层扫描(CT)图像亚像素边缘检测的精度和速度,研究了一种改进的Zernike矩边缘检测方法。该方法采用Sobel边缘算子快速检测出图像所有可能的边缘,通过Zernike矩算子对所有可能的边缘进行重新检测,最后,检测出图像的亚像素边缘并计算其精确位置。由于采用Sobel算子检测出可能的边缘使后续Zernike矩算子检测范围缩小,从而减小了运算量,提高了运算速度。对实际CT图像进行的实验结果表明:改进的Zernike矩工业CT图像边缘检测精度绝对误差<0.24 pixel,改进算法的运算速度提高了约70%。