联萘衍生物的磺化反应研究

研究了1-和2-苯基萘, 1, 1'-和2, 2'-联萘, 2, 2-二羟基-, 2, 2'-二甲氧基和-2, 2'-甲基磺酰氧基-1, 1'-联萘等七种萘衍生物和三氧化硫的磺化反应。1-苯基萘和1, 1'-联萘的磺化先发生在4位上, 第二取代位置为6和7位。2-苯基萘和2, 2'-联萘均首先得到8位磺酸取代物, 进一步磺化得到8, 4'-和8, 8'-二磺酸取代物。2, 2'-二甲氧基-1, 1'-联萘以13:87的比例得到3位和6位磺酸取代物。2, 2'-二甲磺酰氧基-1, 1'-联萘以58:42的比例得到5位和6位磺酸取代物。2, 2'-二羟基-1, 1'-联萘的等摩尔磺化得到比例为35:65的5位和6位磺酸取代物, 和大于6摩尔的SO~3反应则以62:38的比例得到5位和6位磺酸取代物。     

YIHn: A New Family of Metal‐rich Hydride Halides

The graphite‐like yttrium hydride halides, YIH_n (0.8 ? n ? 1.0), have been prepared in quantitative yields by heating either YI₃, YH₂ (1:2) or stoichiometric YI₃, YH₂, Y mixtures in sealed Ta ampoules at 900°C. A lower limit of the homogeneity range, n ≈ 2/3, has been determined from dehydrogenation experiments. All YIH_n phases adopt the ZrBr‐type heavy‐atom structure. The hydrogen variation is accompanied by a change in the c lattice constant from 31.162(3) to 31.033(1) Å for n = 0.61(3) to 1.02(3). The YIH_n phases reversibly react with hydrogen at 400‐600°C to form the light green transparent compound YIH₂. However, increasing the reaction temperature above 700°C causes decomposition to an unidentified phase being in equilibrium with YH₂ and YI₃. The arrangement of the heavy atoms in YIH₂ (P m1; a = 3.8579(3) Å, c = 10.997(1) Å) corresponds to a four‐layer I‐Y‐Y‐I slab with the stacking sequence (AbaB) as was found by x‐ray powder diffraction data refinement with the Rietveld method. A miscibility gap exists between YIH and YIH₂. Samples YIH_n (n ? 1.0) show metallic conductivity at room temperature, which changes into semiconducting behavior with decreasing temperature as n approaches its lower value ≈ 2/3.     

Effect of medium on the rate constant of decomposition of di(tert-butyl)trioxide

It was found that the medium affects the rate constant of the thermal decomposition of di(tert-butyl)trioxide. In all solvents studied, the decomposition occurred according to the first-order law. The effect of the solvent on the rate constant was analyzed within the framework of the Koppel-Palm equation.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1167–1168, June, 1995.The authors are grateful to O. N. Makarova for help in this work.This study was financially supported by the Russian Foundation for Basic Research (Grant No. 93-03-5231).     

Synthesis and structural characterization of a yttrium coordination polymer formed by bridging of an acyclic polyether

The amide-type acyclic polyether, 1,2-ethylenedioxy-bis(N-pyridin-2-ylmethyl-benzamide) (L) was synthesized and characterized by EA, IR and ¹H NMR spectroscopy. The reaction of yttrium nitrate with L produced a rare chain structural coordination polymer {[Y(NO₃)₃L(H₂O)]?·?(H₂O)} _n (1) by use of the flexible ligand L as the building blocks. The structure of 1 was determined by X-ray crystallography and thermal analysis. In 1, L, as a bidentate bridging spacer, binds two neighboring Y atoms to form a one-dimensional chain polymer. The chain polymer was further connected into the three-dimensional network by hydrogen bonding interactions.     

旋涂法制备WO3薄膜电致变色性能

"智能窗"大规模推广顺应可持续发展潮流,三氧化钨(WO_3)是生产"智能窗"的一种重要电致变色材料,但调控WO_3薄膜电致变色性能机制仍待进一步研究。采用旋涂法制备WO_3薄膜,重点研究了溶液浓度和旋涂次数对调控WO_3薄膜电致变色性能的影响。通过表面轮廓仪测量薄膜厚度,X射线衍射(XRD)测量薄膜结晶情况,原子力显微镜(AFM)和扫描电子显微镜(SEM)分析薄膜表面形貌,光谱仪测量薄膜初始态、着色态和褪色态的透射率。实验结果表明,随着溶液浓度增加(0. 2～1. 0 mol/L),薄膜厚度从9. 7 nm增加到33. 3 nm,透射率调制能力从0%提升到37. 0%;多次旋涂薄膜厚度线性增长,线性拟合优度(R~2)达0. 98,5次旋涂后透射率调制能力达51. 3%。改变溶液浓度和旋涂次数都是调控薄膜透射率调制能力的有效手段,精准调控薄膜透射率调制能力对设计不同应用场景的电致变色器件具有重大意义。     

ETUDE STRUCTURALE DE QUELQUES SPIROPHOSPHORANES A LIAISON P–C EXOCYCLIQUE

Abstract

The PMR spectra of some spirophosphorans containing the P–C bond are analysed. The results allow us to determine the stereochemistry of these compounds (conformation, stereoisomerism).

Le spectre de RMP de quelques spirophosphoranes à liaison P–C est analysé. Les résultats sont utilisés pour préciser la stéréochimie de ces composés (conformation, stéréoisomérie).     

Oxidation of Benzoins to Benzils with Chromium Trioxide Under Viscous Conditions

Reaction of chiral allylic cyclic carbonates with Grignards reagent in the presence of NiCl₂(dppe) as a catalyst afforded the alkylated (E)-allylic alcohols with high regio- and diastereoselectivity.     

Reaction with SO3 in Ionic Liquids: The Example of K2(S2O7)­(H2SO4)

The ionic liquid 1‐butyl‐3‐methylimidazolium hydrogensulfate, [bmim]HSO₄, turned out to be resistant even to strong oxidizers like SO₃. Thus, it should be a suitable solvent for the preparation of polysulfates at low temperatures. As a proof of principle we here present the synthesis and crystal structure of K₂(S₂O₇)(H₂SO₄), which has been obtained from the reaction of K₂SO₄ and SO₃ in [bmim]HSO₄. In the crystal structure of K₂(S₂O₇)(H₂SO₄) (orthorhombic, Pbca, Z = 8, a = 810.64(2) pm, b = 1047.90(2) pm, c = 2328.86(6) pm, V = 1978.30(8) ų) two crystallographically unique potassium cations are coordinated by a different number of monodentate and bidentate‐chelating disulfate anions as well as by sulfuric acid molecules. The crystal structure consists of alternating layers of [K₂(S₂O₇)] slabs and H₂SO₄ molecules. Hydrogen bonds between hydrogen atoms of sulfuric acid molecules and oxygen atoms of the neighboring disulfate anions are observed.     

The electrochemical evaluation of antipsychotic drug (promethazine) in biological and environmental samples through samarium cobalt oxide nanoparticles

In this work, we developed a perovskite structured samarium cobalt oxide nanoparticles (SmCoO₃ NPs) with the aid of the co-precipitation method. The rare earth metal (Sm) and cobalt oxide combined to form a perovskite lattice structure. One-pot route synthesized SmCoO₃ NPs were scrutinized successfully through various physicochemical techniques. Concerning its effective thermal stability and electrical properties, the synthesized SmCoO₃ NPs have been effectively implemented in the electrochemical evaluation of promethazine hydrochloride (PHY) using cyclic voltammetry. The electrochemical detection of PHY was performed through SmCoO₃ NPs-modified glassy carbon electrode (GCE) and unmodified GCE. The electron transfer kinetics, effect of scan rate, the influence of pH, electroactive surface area, selectivity, and sensitivity have been studied. The electron charge transfer rate (R_ct) and electrolyte resistance (R_s) were calculated to be 105.59 (Ω) and 150 (Ω) in the ferricyanide probe, indicating great facilitation of the electron transfer between PHY and SmCoO₃ NPs deposited on the electrode surface. Further, the optimized SmCoO₃-modified GCE exemplifies excellent selectivity, storage stability, reproducibility, repeatability, detection limit (5 nM), sensitivity (0.594 μA μM^?1 cm^?2), and wide consecutive linear ranges, respectively. Besides, the proposed method has been effectively employed for the detection of PHY in the various real samples which reveals good recoveries of 95.40–99.17%.     

Binary Metal Oxide Adsorbed Graphene Modified Glassy Carbon Electrode for Detection of Riboflavin

Tungsten oxide (W) decorated titanium oxide (T) adsorbed onto a graphene (Gr) and modified the glassy carbon electrode for the electrochemical quantification of riboflavin (RF) in edible food and pharmaceuticals. For comparison, nanocomposites are formed using graphene oxide (GO), reduced graphene oxide (rGO) and pure graphite (G) sheets to study the electrochemical activities towards riboflavin. The ternary WTGr modified GCE shows the highest electrocatalytic activity due to synergetic interactions between the metal oxide and graphene. The electrochemical observations are supported by the SEM, HRTEM, XRD, UV-Vis, Zeta potential (ζ) and size data. The sensor shows a wide linear range 20 nM–2.5 μM with a detection limit 25.24 nM and sensitivity (4.249×10⁻⁸ A/nM). The fabricated sensor is validated in real samples.