647W灯泵浦大功率连续Nd:YAG激光器

 报道了一台灯泵浦大功率连续Nd:YAG激光器。对影响大功率固体激光器模块输出功率和光束质量的主要因素进行了理论分析，并提出提高激光器效率的措施：对聚光腔的形状、结构和材料以及冷却方式，泵浦灯的参数和材料，激光晶体的参数和镀膜进行优化设计，采用径向固定的谐振腔镜。该灯泵浦YAG晶体棒总体电光转换效率为4%，光束质量为22mm·mrad，输出功率647W。     

Computer simulation of single-crystal and polycrystal sputtering I

Sputtering of Cu single-crystal and polycrystal targets by 27 keV Ar ions has been simulated using the new binary collision cascade computer program OKSANA. The sputtering yield, the sputtering and reflection efficiencies, and the absolute and relative contributions to sputtering from various components have been calculated in a broad range of incidence angles. The obtained angular dependences of the sputtering yield have proved to agree with experimental data. Some features of sputtering due to semichannel focusing of incident particles have been found. The contributions to sputtering from several types of linear collision chains and from the primary knock-on atoms are considered in most detail. It has been shown, in particular, that the pure focused, pure defocused, and mixed focused-defocused collision chains contribute noticeably to sputtering. The contribution from the primary knock-on atoms is angle-dependent and reaches its maximum in the range of glancing angles for both single-crystal and polycrystal targets.     

Spectral downshifting from blue to near infer red region in Ce3+-Nd3+ co-doped YAG phosphor

The YAG phosphors co-doped with Ce³⁺-Nd³⁺ ions by varying concentration of Nd³⁺ ion from 1 mol% to 15 mol% were successfully synthesized by conventional solid state reaction method. The phosphors were characterized by powder X-ray powder diffraction (XRD) and surface morphology was studied by scanning electronic microscope (SEM). The photoluminescence (PL) properties were studied in near infra red (NIR) and ultra violet visible (UV–VIS) region. The synthesized phosphors can convert a blue region photon (453 nm) into photons of NIR region (1063 nm). The energy transfer (ET) process was studied by time decay curve and PL spectra. The theoretical value of energy transfer efficiency (ETE) was calculated from time decay luminescence measurement and the maximum efficiency approached up to 82.23%. Hence this phosphor could be prime candidate as a downshifting (DS) luminescent convertor (phosphor) in front of crystalline silicon solar cell (c-Si) panels to reduce thermalization loss in the solar cells.     

Nd:YAG陶瓷与单晶4F3/2–4I13/2跃迁的弱谱线多波长激光性能对比

报道了基于半导体激光端面抽运Nd:YAG的⁴F_3/2–⁴I_13/2 跃迁的弱谱线多波长激光输出. 实验对比了透明陶瓷与单晶材料的激光输出特性, 表明透明陶瓷和单晶材料荧光谱强度的略微差异, 导致了多波长输出时相同两个波长之间的激光强度比在两种材料中的差异. 基于两种耦合输出镜片, 激光阈值都在2 W左右. 在13.5 W的抽运功率下, 基于Nd:YAG透明陶瓷获得了输出功率4.05 W、强度比1 :2的1338与1356 nm双波长激光和输出功率3.65 W、强度比13 : 1的1356与1414 nm 双波长激光, 斜率效率分别达33.9% 和31.9%.     

Low temperature synthesis and luminescence investigations of YAG:Ce,Eu nanocomposite powder for warm white light-emitting diode

The preparation of the cerium and europium co-doped YAG materials as well as the study for their synthesis and emitting mechanism of the energy transfer between Ce³⁺ and Eu³⁺ were investigated in the present study. YAG:Ce³⁺, Eu³⁺ powders were synthesized using a high-energy ball milling method in different sintering temperature and atmosphere: air and H₂/N₂. The effects of the synthesis procedure on the crystallinity, morphology, structure, and luminescence spectra were examined by X-ray diffraction, field emission-scanning electron microscopy, and photoluminescence spectroscopy. The europium co-doped YAG:Ce³⁺ phosphors is improved the chromaticity coordinates.     

Highly oriented crystalline Er:YAG and Er:YAP layers prepared by PLD and annealing

High quality, thick, highly oriented crystalline thin films of Yttrium Aluminum Garnet (Y₃Al₅O₁₂) and Yttrium Aluminum Perovskite (YAlO₃) doped with Erbium were prepared by pulsed laser deposition. Samples were created in vacuum or oxygen environment. Depositions were arranged at room temperature, or at high substrate temperatures ranging from 800 to 1100 °C. Amorphous layers were annealed by laser, or in oven (argon flow, temperatures in range from 1200 to 1400 °C). Fused silica and sapphire (0 0 0 1) were used as substrates. Properties of films were characterized by X-ray diffraction, atomic force microscopy, and by photoluminescence measurement. Size of crystalline grains was in the range 116-773 nm. Thickness of layers was up to 17 μm.     

LD泵浦Nd：YAG激光器纵模特性及频率稳定性实验研究

摘要为了更好地研究LD泵浦Nd：YAG激光器的输出光束质量，利用共焦球面干涉仪设计了一套用于测量和分析该激光器纵模特性的简易装置，对该激光器的纵模进行了实验分析。在室温下测得纵模间隔为1.83GHz，纵模谱线宽度为113.83MHz。同时利用此装置，对该激光器的频率稳定性进行了分析，在120s取样时间内，测得频率稳定度为2.94×10^-4。     

Concentration quenching in Yb:YAG

The concentration quenching in Yb:YAG crystals with high Yb³⁺ doping level was demonstrated, and studied as well. The color center and lattice distortion which originated from Yb²⁺ are the main reasons for producing the concentration quenching in unannealed Yb:YAG crystals, and after annealing at 1600°C in oxygen atmosphere for 24 h, Yb²⁺ vanished. Trace impurity ions are also responsible for this phenomenon.     

LD泵浦Nd:YAG 946 nm/1 064 nm双波长运转及腔内和频

用国产半导体激光二极管(LD)端面泵浦NdYAG晶体, 通过优化激光谐振腔反射膜系,调节1 064 nm谱线的线性损耗以达到与弱谱线946 nm的增益匹配,在室温下实现1 064 nm和946 nm双波长连续运转,并通过I类临界相位匹配LBO晶体腔内和频在国内首次实现500.8 nm青色激光连续输出.当泵浦注入功率为1.4W时和频青色激光最大输出达20 mW,光-光转换效率为1.4%,功率稳定性24 h内优于±3%.