空心氮掺杂碳球锚定单原子铁位点用于高效电催化氧还原反应（英文）

本研究将单原子分散的Fe-N₄位点锚定在氮掺杂空心多孔碳球上用于电催化氧还原反应,研究表明,所制备的FeSAs/HNCSs-800催化剂表现出优异的电催化氧还原性能,其起始电位为0.925 V,半波电位为0.867 V。球差电镜和同步辐射X射线吸收光谱证实了催化剂中存在高度分散的Fe-N₄单原子位点。通过密度泛函理论计算证明单原子Fe-N₄位点是氧还原反应有效的活性位点,其相邻的C缺陷可以有效调控单原子Fe的电子结构,进而提高电催化氧还原性能。     

Fe掺杂NiSe@NiS复合材料电子调制和界面协同促进析氧性能研究

本研究采用溶剂热法,在泡沫镍(NF)基底上原位合成出Fe掺杂的硒化镍和硫化镍复合材料(Fe-NiSe@NiS/NF)。得益于Fe掺杂优化的电子结构、NiSe和NiS间的协同效应以及高效的电荷转移速率,Fe-NiSe@NiS/NF在1 mol/L KOH溶液中表现出优异的OER性能。在过电位为330 mV时可实现电流密度150 mA/cm²,且电压在稳定40 h后没有发生显著改变。     

B原子掺杂调控CuIn纳米合金电子结构以实现电化学CO2还原宽电位活性(英文)

杂原子掺杂可以调节电子结构以调整中间体吸附并优化反应路径,是设计高效CO₂还原反应(CO₂RR)催化剂的有应用前景的方法.B原子是常用的掺杂剂,引入B原子可以有效打破*COOH和OCHO*中间体的吉布斯自由能线性关系,并且可以通过与CO₂中O原子结合来增强CO₂吸附能力.B掺杂碳材料、单金属和金属氧化物的研究结果表明, B原子掺杂催化剂的CO₂RR活性和/或选择性有明显提高,然而多数报道的单个活性位点的B掺杂催化剂仅表现出在相对狭窄的电位范围内的CO₂RR高性能,设计制备CO₂RR的宽电位高选择性催化剂仍是巨大挑战.研究表明,合金化是提供多种类的活性位点相互协调和增强催化剂固有活性,进而改善CO₂RR性能并调节产物分布的可行策略.引入B原子到合金中以调节电子结构,最终优化关键中间体吸附的活性位点,对于寻找具有宽电位窗口的先进催化剂具有重要意义.本文提出了一种通过B掺杂调节CuIn合金电子结构以实现宽电位高选择性的...     

Pd和Hg共掺杂的金属纳米团簇HgPdAu23(PET)18

异金属原子引入原子精确的金属纳米团簇是调控团簇物理化学性质的有效手段,目前报道的异金属原子掺杂团簇大多数是单个金属原子掺入金属团簇中形成的二元金属纳米团簇,而两个异金属原子同时掺入同一个金属团簇中形成三元金属纳米团簇的报道较少.本工作中,我们报道了Pd和Hg双原子同时掺入Au₂₅(PET)₁₈(PET=苯乙硫醇)团簇中形成HgPdAu₂₃(PET)₁₈新团簇,推测了Pd和Hg在三元金属团簇中最可能的位置,即Pd位于三元金属团簇的内核中心,而Hg原子位于三元金属团簇内核的表面.不同金属种类以及不同的掺杂位置导致了三元金属团簇HgPdAu₂₃(PET)₁₈具有不同于原始团簇Au₂₅(PET)₁₈和二元金属团簇PdAu₂₄(PET)₁₈和HgAu₂₄(PET)₁₈的电子构型.本研究为双金属异原子掺入金属纳米团簇的精准制备提供了新的思...     

CoMn@NC催化5-羟甲基糠醛常压氧化为2, 5-呋喃二甲酸二甲酯

Dimethyl furan-2, 5-dicarboxylate (DMFDCA) is a valuable biomass-derived chemical that is an ideal alternative to fossil-derived terephthalic acid as a monomer for polymers. The one-step oxidation of 5-hydroxymethylfurfural (HMF) to DMFDCA is of practical significance. It not only shortens the reaction pathway but also avoids the separation process of intermediates; thus, reducing cost. In this work, non-noble bimetallic catalysts supported on N-doped porous carbon (CoMn@NC) were synthesized via a one-step co-pyrolysis procedure using different pyrolysis temperatures and proportions of metal precursors and additives. We employed the prepared CoMn@NC catalysts in the aerobic oxidation of HMF under mild reaction conditions to obtain DMFDCA. High-yield DMFDCA was obtained by screening the prepared catalysts and optimizing the reaction conditions, including the strength and amount of the base, as well as the reaction temperature. The optimized yield of DMFDCA was 85% over the Co₃Mn₂@NC-800 catalyst after 12 h at 50 ℃ using ambient-pressure oxygen. The physicochemical properties of the catalysts were determined using a variety of characterization techniques, the factors affecting the performance of each catalyst were investigated, and the relationship between the physicochemical properties and performance of the prepared catalysts was elucidated. A porous structure with a high surface area had a positive effect on mass transfer efficiency. Cobalt nanoparticles (NPs) and atomically dispersed Mn were coordinated to N-doped carbon to form M―N_x (where M = Co or Mn). Based on the Mott-Schottky effect, there was significant electron transfer between each metal and the N-doped carbon, additionally, the metal NPs supplied electrons to the carbon atoms. The electron-deficient metal site in the pyridinic N-rich carbon was beneficial for the activation of HMF and oxygen. The activation of oxygen produced reactive oxygen species (such as superoxide radical anions) to ensure high selectivity to DMFDCA through dehydrogenative oxidation of the hemiacetal intermediate and hydroxymethyl group of 5-hydroxymethyl-2-methyl-furoate. The existence of disordered and defective carbons increased the number of active sites. Subsequently, we performed a series of control experiments. Based on our current experimental results and previous studies, we propose a simple mechanism for the aerobic oxidation of HMF to DMFDCA. The catalyst was stable, its performance decreased slightly after two cycles, and it was tolerant to SCN⁻ ions and resistant against N or S poisoning. Furthermore, the use of this catalytic system can be expanded to various substituted aromatic alcohols, such as benzyl alcohols with different substituents, furfuryl alcohol, and heterocyclic alcohols. Simultaneously, the product type was further extended from methyl esters to ethyl esters with a high yield when the substrate reacted with ethanol. In conclusion, this catalytic system can be applied in the production of carboxylic esters for polymers.     

硼、磷共掺杂铁钴双金属材料的制备及其电催化析氧性能

采用一步水热法合成了硼、磷共掺杂铁钴材料(Fe-Co-B-P)。借助扫描电子显微镜(SEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)、傅里叶变换红外光谱(FT-IR)等技术对所合成材料的形貌、结构和组成进行表征。利用线性扫描伏安(LSV)、循环伏安(CV)、电化学阻抗谱(EIS)等技术研究材料电化学析氧反应(OER)性能。结果表明,Fe-Co-B-P表面疏松且粗糙,颗粒间有许多空隙。在电流密度为10和100 mA·cm^-2时,其过电势分别为278和309 mV,Tafel斜率为24 mV·dec^-1,说明该材料具有较优的电催化析氧性能。其在连续进行10 h的计时电位测试过程中,电势基本保持在1.55 V(vs RHE),表明该催化剂具有较好的电化学稳定性。这是由于铁钴双金属与硼、磷非金属之间的协同作用促进了电子的传递。     

氟化氢溶液无电沉积法制备W掺杂Ag树枝晶

应用无电沉积在氟化氢溶液制备W掺杂Ag树枝晶,样品由XPS,XRD,SEM和TEM表征,结果表明在Ag-W二元体系中,Ag的生长起主导作用,不受钨酸根离子而改变。提出W元素的掺杂方式,即W元素的掺杂是在银的沉积过程中通过化学吸附—钨酸根二聚体的氧原子与银原子的化学作用力而实现的。循环伏安法用于检测银氧间的化学键能的强弱。     

Mg^2＋掺杂对锂离子正极材料Li3V2（PO4）3的影响

随着市场对锂离子电池(LIB)需求的日趋增长,对电极活性物质的要求也在朝着高能量密度、低成本、安全稳定、环境友好的方向努力,其中正极材料相对负极材料的发展较为缓慢,成为制约LIB发展的瓶颈。NASICON结构的Li3V2(PO4)3属于单斜晶系,相对金属锂具有很高的电势,理论容量高达19     

Vacuum Ultraviolet Excited Photoluminescence Properties of Y2O2S：Eu^3＋,Bi^3＋ Phosphor

As an Hg-free lamp using phosphor, the Bi3+ and Eu3+ co-doped Y2O2S phosphors were prepared and their luminescence properties under vacuum ultraviolet(VUV) excitation were investigated. The VUV photoluminescent intensity of Y2O2S:Eu3+ was weak, however, considerably stronger red emission at 626 nm with good color purity was observed in Y2O2S:Eu3+,Bi3+ systems. Investigation on the photoluminescence reveals that the strong VUV luminescence of Y2O2S:Eu3+,Bi3+ at 147 nm is mainly because the Bi3+ acts as a med...     

Vacuum Ultraviolet Excited Photoluminescence Properties of Y2O2S：Eu^3＋,Bi^3＋ Phosphor

As an Hg-free lamp using phosphor, the Bi^3＋ and EH^3＋ co-doped Y2O2S phosphors were prepared and their luminescence properties under vacuum ultraviolet（VUV） excitation were investigated. The VUV photoluminescent intensity of Y2O2S：Eu^3＋ was weak, however, considerably stronger red emission at 626 nm with good color purity was observed in Y2O2S：Eu^3＋,Bi^3＋ systems. Investigation on the photoluminescence reveals that the strong VUV luminescence of Y2O2S：Eu^3＋,Bi^3＋ at 147 nm is mainly because the Bi^3＋ acts as a medium and effectively performs the energy transfer process： Y^3＋-O^2-→Bi^3＋→Eu^3＋, while the intense emission band at 172 nm is attributed to the absorption of the characteristic ^1So-^1P1 transition of Bi^3＋ and the direct energy transfer from Bi^3＋ to Eu^3＋. The Y2O2S：Eu^3＋,Bi^3＋ shows excellent VUV optical properties compared with the commercial （Y,Gd）BO3：Eu^3＋. Thus, the Y2O2S：Eu^3＋,Bi^3＋ can be a potential red VUV-excited candidate applied in Hg-free lamps for backlight of liquid crystal display.