Evaluation of piezoelectric PVDF polymers for use in space environments. III. Comparison of the effects of vacuum UV and gamma radiation

Films of piezoelectric PVDF and P(VDF‐TrFE) were exposed to vacuum UV (115–300 nm VUV) and γ‐radiation to investigate how these two forms of radiation affect the chemical, morphological, and piezoelectric properties of the polymers. The extent of crosslinking was almost identical in both polymers after γ‐irradiation, but surprisingly, was significantly higher for the TrFE copolymer after VUV‐irradiation. Changes in the melting behavior were also more significant in the TrFE copolymer after VUV‐irradiation due to both surface and bulk crosslinking, compared with only surface crosslinking for the PVDF films. The piezoelectric properties (measured using d₃₃ piezoelectric coefficients and D‐E hysteresis loops) were unchanged in the PVDF homopolymer, while the TrFE copolymer exhibited more narrow D‐E loops after exposure to either γ‐ or VUV‐radiation. The more severe damage to the TrFE copolymer in comparison with the PVDF homopolymer after VUV‐irradiation is explained by different energy deposition characteristics. The short wavelength, highly energetic photons are undoubtedly absorbed in the surface layers of both polymers, and we propose that while the longer wavelength components of the VUV‐radiation are absorbed by the bulk of the TrFE copolymer causing crosslinking, they are transmitted harmlessly in the PVDF homopolymer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3253–3264, 2006     

Methods in carbon K-edge NEXAFS: Experiment and analysis

Near-edge X-ray absorption spectroscopy (NEXAFS) is widely used to probe the chemistry and structure of surface layers. Moreover, using ultra-high brilliance polarised synchrotron light sources, it is possible to determine the molecular alignment of ultra-thin surface films. However, the quantitative analysis of NEXAFS data is complicated by many experimental factors and, historically, the essential methods of calibration, normalisation and artefact removal are presented in the literature in a somewhat fragmented manner, thus hindering their integrated implementation as well as their further development. This paper outlines a unified, systematic approach to the collection and quantitative analysis of NEXAFS data with a particular focus upon carbon K-edge spectra. As a consequence, we show that current methods neglect several important aspects of the data analysis process, which we address with a combination of novel and adapted techniques. We discuss multiple approaches in solving the issues commonly encountered in the analysis of NEXAFS data, revealing the inherent assumptions of each approach and providing guidelines for assessing their appropriateness in a broad range of experimental situations.     

Effect of a thermal radiation field on the γ-luminescence of alkali-silicate glass

We revealed the changes in the γ-luminescence spectra under the influence of a thermal radiation field on high-purity alkali-silicate glasses (I) and those with addition of Fe³⁺ ions (II). We explain the obtained results within the framework of the L-model of edge absorption and electron-hole recombination processes. Samarkand State University, 15, Universitetskii Bul., Samarkand, 703004, Republic of Uzbekistan. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 65, No. 3, pp. 453–455, May–June, 1998.     

Gamma radiation effects on an amine antioxidant added in an ethylene-propylene copolymer

The aim of this work was to compare the gamma radiation induced effects on samples of an ethylene-propylene copolymer antioxidant free with samples loaded with an antioxidant characterised by the presence of an -NH functional group. The employed techniques were Electron Spin Resonance spectroscopy (ESR) and High Performance Liquid Chromatography (HPLC). Stable radicals R---NO° due to the interaction of free radicals produced in the irradiated polymer with the antioxidant have been observed by ESR at room temperature. The time evolution of the ESR signals following the irradiation was examined at different doses. The amount of antioxidant not involved in the oxidation reactions has been determined using HPLC.     

The effect of UV light on the thermooxidative stability of linear low density polyethylene films crosslinked by ionizing radiation

The effect of ultraviolet (UV) light on the thermooxidative stability of Linear Low Density Polyethylene(LLDPE) films was studied. LLDPE was stabilized with phenolic type antioxidant known as Irganox 1010, hindered amine light stabilizer known as Chimmasorb 944 and phenolic type gamma stabilizer. The influence of these additives on the thermooxidative stability of gamma and UV irradiated LLDPE were investigated by isothermal Differential Scanning Calorimeter (DSC). The oxidation induction time (OIT) experiments indicate that antirad free LLDPE films which contains antioxidant and UV stabilizer are more sensitive to gamma and UV radiation. On the other hand, films which contain antirad and irradiated to different doses of γ-radiation demonstrated improved thermooxidative stability.     

XPS investigations of ink‐jet printed paper

Different ink‐jet printed paper materials were investigated using X‐ray photoelectron spectroscopy (XPS) yielding the elemental composition of the near‐surface region of the papers. We found significant differences with respect to the detected elements and their atomic concentrations in the different inks studied here. Two different groups of inks could be identified by means of a lower ratio of the O and C atomic concentrations and lower concentrations in specific trace elements like Mg, Na and Si. High‐resolution spectra of C 1s and O 1s core levels allowed a detailed determination of the chemical state of the respective elements. On the basis of a detailed deconvolution of these XPS signals, significant differences between all the investigated ink‐jet printed papers were found, thereby allowing their discrimination. The applicability of the measurements and, more generally, the XPS technique for forensic investigations of paper are discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

The effect of covalent surface immobilization on the bactericidal efficacy of a quaternary ammonium compound

This study investigates the effect of surface immobilization on the bactericidal function of a quaternary ammonium compound. Quaternary ammonium silane (QAS) coated planar surfaces did not produce any measurable mortality of Staphylococcus aureus, while 1 µm QAS‐coated microparticles did produce S. aureus mortality. The experiments using QAS‐coated microparticles indicate that the ability of QAS molecules to disrupt the cell wall is not hindered by covalent immobilization of QAS to a surface. These results provide evidence that S. aureus cells on a QAS‐coated planar surface are not exposed to a sufficient number of QAS molecules to produce significant mortality. This result has important implications for the development of self‐decontaminating coatings. Covalent immobilization is used to prevent leaching of the bactericidal compound. However, covalent immobilization may result in a significant tradeoff in bactericidal performance. Published in 2007 by John Wiley & Sons, Ltd.     

Hydrogen cycling induced diffraction peak broadening in C14 and C15 Laves phases

The diffraction peak broadening induced by hydrogen absorption-desorption cycling has been analyzed in four different Laves phase compounds with the C14 and C15 structures. The broadening is due to strain most probably originating from dislocations generated at the interface between the α and β hydride phases in connection with the cell volume difference between the two phases. It has been shown that it is strongly compound dependent. In the case of the C14 structure, the broadening is large and isotropic, and the latter can be related to the isotropy of the elastic constants of the metallic phase. The broadening is less for the compounds with the C15 structure, which can be related to a possibly softer lattice. Better ageing properties after long-term cycling are predicted for this crystal structure.