用于中温烟气脱硫的新型钙基脱硫剂

研究了高效钙基脱硫剂的制备原理,在石灰水合反应生成氢氧化钙和提高比表面积两个关键环节上,采用了一系列方法提高钙利用率,获得突破性进展。进一步研究了中温范围内脱硫温度对钙利用率的影响,得到700℃时超过95％的钙利用率,为发展中温干式烟气脱硫工艺开辟了新的道路。     

离心力场下H2O和R12热驱动换热特性实验研究

本文实验研究了离心力场下细微封闭循环通道中,以H2O和氟利昂R12为热驱动介质的热驱动流动规律和换热特性,重点分析了热驱动换热效果随Ra数Ro数的变化规律以及冷却效果。实验结果表明:在热流密度和旋转速度相同的条件下,采用介质R12可以获得较高的平均换热系数,冷却效果也优于以H2O为介质的冷却效果。最后建立了两种介质条件下相应的准则关系式。     

束变换环孔激光谐振腔的环束场传输差分计算

 通过使用新的坐标变量和光场的表达形式，推导了新坐标系下环束场传输的偏微分方程，给出了相应差分方程的截断误差和稳定性条件，使得环束场传输计算速度大幅提高；使用二阶精度的Crank-Nicolso差分方法对束变换环孔激光谐振腔的环束场传输进行了计算，并与W.D.Murphy和M.L.Bernabe所给M-B积分近似方法的计算结果进行了比较，证实了该方法无论计算速度和精度都优于M-B积分近似方法。     

应用离散偶应力单元分析弹性Cosserat介质

讨论了平面弹性偶应力问题的有限元方法,提出了离散偶应力单元的理论和构造方法,其特点是独立假设单元的位移和微观转角,偶应力理论中微观转角和宏观转角相等的假设在单元中以离散形式强加.该类单元列式简单,易于编程,且有满意的精度.并构造了一个三角形九自由度离散偶应力单元DCT9(discrete Coss-erat triangular).数值结果表明该单元能够较好地描述Cosserat介质的力学性质.     

Shrinking device realized by using layered structures of homogeneous isotropic materials

We propose the practical realization of a shrinking device by using layered structures of homogeneous isotropic materials.By mimicking the shrinking device with concentric alternating thin layers of isotropic dielectrics,the permittivity and the permeability in each isotropic layer can be properly determined from the effective medium theory in order to achieve the shrinking effect.The device realized by multilayer coating with dielectrics is validated by TE wave simulation,and good shrinking performance is demonstrated with only a few layers of homogeneous isotropic materials.     

Dislocations hétéro-interfaciales vis perçant une plaquette mince

A specimen observed in high-resolution transmission electron microscopy is electron transparent and its thickness is often less than about 10 nm. When it contains a linear defect like a screw dislocation, the obtained image can exhibit more or less important perturbations due to elastic relaxation nearby both free surfaces. Therefore, the theoretical interpretation of an image should include this relaxation in the calculation model. In the present work, it is evaluated for screw misfit dislocations piercing normally an elastically heterogeneous bicristalline plate (thickness 2h) from the following assumptions: there is no applied force on the thin plate and any surface stress related to a possible nanometric structure along the two free surfaces is neglected. The solution is found from an appropriate combination of known elastic fields in an infinite medium, which enables total stresses applying on two planes distant of 2h to be cancelled. This solution generalizes for the first time that of Eshelby and Stroh (1951), who consider an isolated screw dislocation normal to a homogeneous plate.     

Sigma Meson Production in Nuclear Reactions

The sigma meson production in p ＋ ^12C and p A- ^40Ca reactions at the incident energy Ep = 1.5 GeV is investigated within the Quantum Molecular Dynamics model. The simulation results indicate a distinctive A dependence of the sigma production, that is, the increase of A is followed by an increase of the production cross sections. We find that the σ meson production in proton-induced reactions is strongly medium-dependent, and the produced σ mesons decaying in a denser medium experience a stronger mass shift towards lower masses. This mass shift is an experimentally accessible observable in the final state pion pairs, which do not suffer from reabsorption by the surrounding nucleons. It is pointed out that the ratio of measured sigma cross sections as a function of the sigma invariant-mass from various reactions is a good probe to explore the existence of the σ meson in a dense nuclear environment.     

Numerical investigation of a fast-axial-flow CW CO2 laser

This paper presents the results of the calculation of the parameters of the active medium of a fast-axial-flow CO₂ laser using numerical methods in the framework of a one-dimensional approximation of the set of continuity equations, Bernoulli equation, equation of gas state, energy equation and multi-temperature rate equations with regard to diffusion for the gas flow in the cylindrical discharge tube. The spatial distribution of the small-signal gain and gas temperature along the gas flow direction have been calculated for a given set of initial conditions, namely, gas flow velocity, gas pressure and the tube diameter. In addition, the dependence of small-signal gain, the asymmetric stretch vibrational temperature of CO₂ (T₃) and the gas temperature on the discharge current were studied.     

胶体铁磁流体的光子特性研究

这篇综述回顾了我们今年来在铁磁流体方面的一些研究工作。铁磁流体是一种纳米磁颗粒或亚铁磁颗粒悬浮在基液（如：水或煤油）中形成的悬浮液。铁磁流体之所以受到广泛关注,是因为它们在许多方面都有着潜在应用,例如在机械工程和生物医学等领域。再次综述中,我们首先介绍了铁磁流体的场感应各向异性结构,然后,介绍了几种铁磁流体基软物质材料的光学性质,即：光学负折射、磁控光子待隙和非线性光学响应。我们采用的研究方法主要是分子动力学模拟,有效煤质近似和有限元模拟.     

多孔介质内交变流动与换热的格子Boltzmann研究

针对制约脉冲管制冷机效率提高的蓄冷器内交变流动与换热问题,本文使用格子Boltzmann方法计算并分析了多孔介质内交变流动与换热特性。结果表明,交变流动压力波振幅对速度与压力和温度间的相位差的影响很小;通道界面处速度与压力的相位差在某一孔隙率下有一极小值;多孔介质内最大阻力系数与雷诺数的关系可以为设计蓄冷器时填料结构的...