The recent progress of wide bandgap donor polymers towards non-fullerene organic solar cells

The recent progress of wide bandgap (WBG) donor polymers for non-fullerene polymer solar cells (NF-PSCs) were reviewed in detail, which was classified by D-type and D-A type molecular backbones to discuss the related structure-property correlations and put forward an outlook for future innovations.     

Comparison of various silica‐based monoliths for the analysis of large biomolecules†

In the present study, three types of silica‐based monoliths, i.e. the first and second generations of commercial silica monolithic columns and a wide‐pore prototype monolith were compared for the analysis of large biomolecules. These molecules possess molecular weights between 1 and 66 kDa. The gradient kinetic performance of the first‐generation monolith was lower than that of the second generation, for large biomolecules (>14 kDa) but very close with smaller ones (1.3–5.8 kDa). In contrast, the wide‐pore prototype column was particularly attractive with proteins larger than 19 kDa (higher peak capacity). Among these three columns, the selectivity and retention remained quite similar but a possible larger number of accessible and charged residual silanols was noticed on the wide‐pore prototype material, which led to unpredicted small changes in selectivity and slightly broader peaks than expected. The peak shapes attained with the addition of 0.1% formic acid in the mobile phase remained acceptable for MS coupling, particularly for biomolecules of less than 6 kDa. It was found that one of the major issues with all of these silica‐based monoliths is the possible poor recovery of large biomolecules (principally with monoclonal antibody fragments of more than 25 kDa).     

STUDIES ON TUNG OIL COATED REGENERATED CELLULOSE FILMS WITH WATERRESISTANCE

Regenerated cellulose films with water-resistance were obtained by an improved method ofpreparing cellulose cuoxam solution from pulps of agricultural wastes (linters, wheat straw, reedand Bamao). Experimental results showed that the mechanical properties of both the dry. and wetfilms were excellent. Data from IR, SEM and tensile strength measurements implied that thesignificant improvement of water-resistance of the films was due to the cohesion between the thinTung oil covers with hydrophobicity and the regenerated cellulose films. The films werecompletely biodegraded after being buried in soil for 100 days. The transmittance of the filmsderived from linter and reed in visible band range were 80-90%.     

大口径毛细管气相色谱法直接测定复方阿司匹林制剂

建立了同时测定复方阿司匹林制剂中阿司匹林、对乙酰氨基酚、咖啡因及降解产物水杨酸的大口径毛细管气相色谱法。在HP-1大口径色谱柱上直接进样,无需衍生化处理,所测组分与内标物2 min内达到基线分离。各组分在其线性范围内线性关系良好(相关系数均高于0.999),检出限分别为10.0μg/L、5.0μg/L、1.0μg/L和1.0μg/L。经样品测定,平均回收率为97.46%~101.24%。该法简便、快速、准确、重现性好,可用于复方阿司匹林制剂的质量控制。     

3D X-ray Micro-CT Analysis of Rebar Corrosion in Reinforced Concrete Subjected to a Chloride-Induced Environment

The paper presents experimental investigations of the concrete covers’ protective ability to counteract rebar corrosion in reinforced concrete cubes. The concrete sample was subjected to a chloride-induced environment to get corroded and combined with an un-corroded sample. The chloride-accelerated technique can induce a high degree of corrosion within a controlled time. Moreover, detailed and thorough experimental measurements and analyses of reinforcement loss due to corrosion and its influence on concrete microstructure, were studied through 3D X-ray micro-computed tomography. The rebar outside the concrete was heavily corroded due to the chloride-accelerated test, whereas, only local surface corrosion products appeared inside the concrete. It turned out that the concrete cover showed protective ability to counteract the reinforcing-steel corrosion mechanism despite the accelerated corrosion environment. Moreover, the bond strength between the reinforcement rebar and concrete was not visibly affected since the failure force in the pull-out test and failure mechanisms, observed by 3D X-ray micro-CT, were similar for corroded and un-corroded samples. The failure occurred due to radial cracks with a maximum width equal to approximately 0.25 mm.     

Dynamic method as a simple approach for wide range pH measurements using optodes

In this paper, a flow system equipped with an optode has been suggested for wide range pH measurements. Triacetyl cellulose was used as the optode membrane in which different pH indicators were immobilized. For extending the pH range, the dynamic response rather than the steady-state response of the optode was measured. Since diffusion is the main process governing the system response, different parameters having influence on diffusion of the analyte into the membrane were optimized. Under the optimum conditions, wide range pH determination (up to 11 pH units) is simply achieved regardless of the pK_a of the pH indicator immobilized in the membrane. To validate the application of the method different indicators with different structures and pK_a values were tested and the results were all confirming the precision and accuracy of the method. The suggested method also has combined advantages of flow systems together with inherent advantages of kinetic systems.     

Preparation of safe water–lipid mixed electrolytes for application in ion capacitor

Aqueous electrolytes are safe, economic, and environmentally friendly. However, they have a narrow potential window. On the other hand, organic electrolytes exhibit good thermodynamic stability but are inflammable and moisture sensitive. In this study, we prepared water–PEG–lipid ternary electrolytes(TEs). To combine the advantages of water, polyethylene glycol(PEG) and propylene carbonate(PC). The nonflammable mixed electrolytes exhibited a wide potential window of about 2.8 V due to the beneficial effects of PEG and PC. Using these TEs, a lithium manganate–active carbon ion capacitor could be operated at 2.4 V with an energy density of 32 Wh/kg, based on the total active electrode material(current density of 3.3 m A/cm~2). This value was significantly higher than that achieved using an aqueous electrolyte, thereby rationalizing the higher energy density.     

Robust and Wide Temperature-Range Zinc Metal Batteries with Unique Electrolyte and Substrate Design

Rechargeable zinc metal batteries are promising for large-scale energy storage. However, their practical application is limited by harsh issues such as uncontrollable dendrite growth, low Coulombic efficiency, and poor temperature tolerance. Herein, a unique design strategy using γ-valerolactone-based electrolyte and nanocarbon-coated aluminum substrate was reported to solve the above problems. The electrolyte with extremely low freezing point and high thermal stability enables the symmetric cells with long cycle life over a wide temperature range (−50 °C to 80 °C) due to its ability to regulate zinc nucleation and preferential epitaxial growth. Besides, the nanocarbon-coated aluminum substrate can also promote a higher Coulombic efficiency over a wide temperature range in contrast to the low Coulombic efficiency of copper substrates with significant irreversible alloying reactions because this unique substrate with excellent chemical stabilization can homogenize the interfacial electron/ion distribution. The optimized zinc metal capacitors can operate stably under various temperature conditions (2000 cycles at 30 °C with 66 % depth of discharge and 1200 cycles at 80 °C with 50 % depth of discharge). This unique electrolyte and substrate design strategy achieves a robust zinc metal battery over a wide temperature range.     

A Polarized Gel Electrolyte for Wide-Temperature Flexible Zinc-Air Batteries

The development of flexible zinc-air batteries (FZABs) has attracted broad attention in the field of wearable electronic devices. Gel electrolyte is one of the most important components in FZABs, which is urgent to be optimized to match with Zn anode and adapt to severe climates. In this work, a polarized gel electrolyte of polyacrylamide-sodium citric (PAM-SC) is designed for FZABs, in which the SC molecules contain large amount of polarized −COO⁻ functional groups. The polarized −COO⁻ groups can form an electrical field between gel electrolyte and Zn anode to suppress Zn dendrite growth. Besides, the −COO⁻ groups in PAM-SC can fix H₂O molecules, which prevents water from freezing and evaporating. The polarized PAM-SC hydrogel delivers a high ionic conductivity of 324.68 mS cm⁻¹ and water retention of 96.85 % after being exposed for 96 h. FZABs with the PAM-SC gel electrolyte exhibit long cycling life of 700 cycles at −40 °C, showing the application prospect under extreme conditions.     

网络最小覆盖流问题

网络流理论中最基本的模型是最大流及最小费用流问题. 为研 究堵塞现象, 文献中出现了最小饱和流问题, 但它是NP-难的. 研究类似的最小覆盖流问题, 即求一流, 使每一条弧的流量达到一定的额定量, 而流的值为最小. 主要结果是给出多项式时间算法, 并应用于最小饱和流问题.