海面波浪坡度场光学测量装置的光源设计(英文)

在海面波浪坡度场光学测量系统中,光源是一个非常重要的照明元件。合理的设计和选用光源,是保证系统精度和布局的重要因素之一。比较传统光源短弧氙灯的明显优势,如低能耗,寿命长,更好的安全性和稳定性等,本文提出了采用LED作为本系统光源的设想,确定了所需LED个数和LED阵列方式,并经过计算和光学软件模拟,验证了本设想的可行性。     

基于正交试验法的显微镜上照明设计

根据LED光源特性和目标面光强的分布要求,采用正交试验法,对显微镜的LED照明系统进行优化设计。利用TracePro软件对所设计的系统进行光线追迹仿真,结果表明,在Φ50mm的范围内照度均匀性达到83.7%,能量利用率达到52.8%。该结构简单,成本低,易于实现。     

基于相关分析的LED路灯光强分布测试步距角优化研究

优化LED路灯光强分布测试系统的测试步距角可以较大程度地提高LED路灯测试的效率。选择不同的测试步距角对LED路灯的光强分布进行测试,将1°测试步距角所测得的路灯光强分布视为真值,采用相关分析的方法研究在较大步距角下所测得的路灯光强分布与真值之间的近似程度。研究结果显示,当相关系数要求在98%左右时,可以选择15°测试步距角对LED路灯的光强分布进行测试,相对于真值测试,在此步距下LED路灯的测试时间减少了98%以上,极大地提高了测试效率。     

卫星太阳能电池阵破损自动检测系统的研究

介绍了国内首次研制的卫星太阳能电池阵破损自动检测系统的检测原理、系统结构与设计及现场试用结果。系统采用专用照明系统,电池阵列经光学系统清晰成像至CCD传感器上,经信号放大、A/D转换后输入计算机管理和控制系统。图像传感探头自动扫描整块电池板,并由距离传感器控制,始终保持采集图像清晰。利用特有的系统控制和检测软件,处理每幅电池图像信息,检测结果通过列表形式给出损伤电池的位置、破损类型、破损度等参数。现场试验结果表明:该系统的检出率达98.5%以上,检测速度为每分钟20片电池,达到了快速、高精度、自动化检测太阳能电池阵的使用要求。     

卫星太阳能电池阵破损自动检测系统的研究

介绍了国内首次研制的卫星太阳能电池阵破损自动检测系统的检测原理、系统结构与设计及现场试用结果。系统采用专用照明系统,电池阵列经光学系统清晰成像至CCD传感器上,经信号放大、A/D转换后输入计算机管理和控制系统。图像传感探头自动扫描整块电池板,并由距离传感器控制,始终保持采集图像清晰。利用特有的系统控制和检测软件,处理每幅电池图像信息,检测结果通过列表形式给出损伤电池的位置、破损类型、破损度等参数。现场试验结果表明:该系统的检出率达98.5%以上,检测速度为每分钟20片电池,达到了快速、高精度、自动化检测太阳能电池阵的使用要求。     

The response of an elastic three-dimensional half-space to random correlated displacement perturbations on the boundary

The response of an elastic half-space to random excitations of displacements on the boundary under the condition of no shearing forces is studied. We analyze the white noise excitations and general random fluctuations of displacements prescribed on the boundary. We consider the case of partially ordered defects on the boundary whose positions are governed by an exponential-cosine-type correlation function. The analysis is based on a Poisson-type integral formula which we derive here for the case of zero shearing forces on the boundary. We obtain exact representations for the displacement correlation tensor and the Karhunen-Loève expansion for the solution of the Lamé equation itself, and analyze some features of the correlation structure of the displacements. The Monte Carlo technique developed can be applied to a wide class of differential equations with random boundary conditions.     

White matter abnormalities in children and adolescents with temporal lobe epilepsy

Background and Purpose

The widespread propagation of synchronized neuronal firing in seizure disorders may affect cortical and subcortical brain regions. Diffusion tensor imaging (DTI) can noninvasively quantify white matter integrity. The purpose of this study was to investigate the abnormal changes of white matter in children and adolescents with focal temporal lobe epilepsy (TLE) using DTI.

Materials and Methods

Eight patients with clinically diagnosed TLE and eight age- and sex-matched healthy controls were studied. DTI images were obtained with a 3-T magnetic resonance imaging scanner. The epileptic foci were localized with magnetoencephalography. Fractional anisotropy (FA), mean diffusivity (MD), parallel (λ_||) and perpendicular (λ_⊥) diffusivities in the genu of the corpus callosum, splenium of the corpus callosum (SCC), external capsule (EC), anterior limbs of the internal capsule (AIC), and the posterior limbs of the internal capsule (PIC) were calculated. The DTI parameters between patients and controls were statistically compared. Correlations of these DTI parameters of each selected structure with age of seizure onset and duration of epilepsy were analysed.

Results

In comparison to controls, both patients' seizure ipsilateral and contralateral had significantly lower FA in the AIC; PIC and SCC and higher MD, λ_|| and λ_⊥ in the EC, AIC, PIC and SCC. The MD, λ_|| and λ_⊥ were significantly correlated with age of seizure onset in the EC and PIC. λ_|| was significantly correlated with the duration of epilepsy in the EC and PIC.

Conclusion

The results of the present study indicate that children and adolescents with TLE had significant abnormalities in the white matter in the hemisphere with seizure foci. Furthermore, these abnormalities may extend to the other brain hemisphere. The age of seizure onset and duration of epilepsy may be important factors in determining the extent of influence of children and adolescents TLE on white matter.     

Photoluminescence of SrGa2S4:Sn,Re(=Ce, Gd) phosphors

The photoluminescence (PL) spectra, PL excitation spectra, color coordinates, and X-ray diffraction spectra are reported for SrGa₂S₄:Sn,Re(=Ce and Gd, respectively) phosphors. By mixing SrGa₂S₄:Sn,Ce phosphors with different Ce³⁺ concentrations, white emissions can be obtained under the excitation of a 340-nm UV LED. Emissions in the green to yellow color range can be obtained from SrGa₂S₄:Sn,Gd phosphors. The rare earth ions enhance the green emission band, which peaks at 534 nm, instead of the yellow one. The origin of this enhancement is discussed. The resonant energy transfer rates are estimated in the cases from Ce³⁺ to the green and yellow centers of Sn²⁺ and between the yellow centers and the green centers.     

Photoluminescence of (Ba1−xEux)Si6N8O (0.005≤x≤0.2) phosphors

Eu²⁺-doped BaSi₆N₈O phosphors (Ba_1−xEu_xSi₆N₈O, 0.005≤x≤0.2) were synthesized by gas-pressure sintering of the powder mixture of BaCO₃, Si₃N₄, and Eu₂O₃ at 1750 °C under 0.5 MPa N₂. The fired powder consists of a major BaSi₆N₈O phase and a trace amount of impurity phases. The structural result of the BaSi₆N₈O powder, refined by the Rietveld method, agrees well with that of single crystals. A wide blue luminescence band peaking at about 500 nm is observed in BaSi₆N₈O:Eu²⁺, upon excitation with the ultraviolet light of 310 nm. Although Eu is covalently bonded to six nearest neighbor nitrogen atoms, the luminescence of Eu²⁺ is not significantly redshifted but shows a very narrow excitation spectrum at high energies. The origin of the short-wavelength luminescence is mainly ascribed to a small crystal-field splitting as a result of extremely long distances between europium and nitrogen ligands in BaSi₆N₈O:Eu²⁺.     

Photoluminescence characterization of Ce and Dy doped Li2CaGeO4 phosphors

Ce³⁺ and Dy³⁺ activated Li₂CaGeO₄ phosphors were prepared by a solid-state reaction method, and characterized by XRD (X-ray diffraction) and photoluminescence techniques. The characteristic emission bands of Dy³⁺ due to ⁴F_9/2→⁶H_15/2 (blue) and ⁴F_9/2→⁶H_13/2 (yellow) transitions were detected in the emission spectra of Li₂CaGeO₄:Dy³⁺. Ce³⁺ broad band emission was observed in Li₂CaGeO₄:Ce³⁺ phosphors at 372 and 400 nm due to 5d→4f transition when excited at 353 nm. Co-doping of Ce³⁺ enhanced the luminescence of Dy³⁺ significantly and concentration quenching occurs when Dy³⁺ is beyond 0.04 mol%. White-light with different hues can be realized by tuning Dy³⁺ concentration in the phosphors.