Principal eigenvector field segmentation for reproducible diffusion tensor tractography of white matter structures

The study was aimed to test the feasibility of utilizing an algorithmically determinable stable fiber mass (SFM) map obtained by an unsupervised principal eigenvector field segmentation (PEVFS) for automatic delineation of 18 white matter (WM) tracts: (1) corpus callosum (CC), (2) tapetum (TP), (3) inferior longitudinal fasciculus (ILF), (4) uncinate fasciculus (UNC), (5) inferior fronto-occipital fasciculus (IFO), (6) optic pathways (OP), (7) superior longitudinal fasciculus (SLF), (8) arcuate fasciculus (AF), (9) fornix (FX), (10) cingulum (CG), (11) anterior thalamic radiation (ATR), (12) superior thalamic radiation (STR), (13) posterior thalamic radiation (PTR), (14) corticospinal/corticopontine tract (CST/CPT), (15) medial lemniscus (ML), (16) superior cerebellar peduncle (SCP), (17) middle cerebellar peduncle (MCP) and (18) inferior cerebellar peduncle (ICP). Diffusion tensor imaging (DTI)-derived fractional anisotropy (FA) and the principal eigenvector field have been used to create the SFM consisting of a collection of linear voxel structures which are grouped together by color-coding them into seven natural classes to provide PEVFS signature segments which greatly facilitate the selection of regions of interest (ROIs) for fiber tractography using just a single mouse click, as compared with a manual drawing of ROIs in the classical approach. All the 18 fiber bundles have been successfully reconstructed, in all the subjects, using the single ROIs provided by the SFM approach, with their reproducibility characterized by the fact that the ROI selection is user independent. The essentially automatic PEVFS method is robust, efficient and compares favorably with the classical ROI methods for diffusion tensor tractography (DTT).     

测定啤酒和白葡萄酒中有机酸的离子排斥色谱法

研究了离子排斥色谱法分离测定啤酒和白葡萄酒中有机酸；选用常见的盐酸溶液作淋洗液，以四丁基氢氧化铵为再生液，考察了淋洗液浓度、流量等因素对分离和测定的影响，对啤酒和白葡萄酒中常见有机酸在阴离子排斥色谱柱上的保留行为进行了系统的研究；通过试验确定最佳的色谱条件为盐酸浓度1．10mmol/L，流量0．80mL/min；四丁基氢氧化铵浓度5.0mmol/L，流量1.10mL/min；并在该条件下，测定了啤酒和白葡萄酒中的有机酸。     

高质量CdTe量子点的水相快速合成

系统考察了水相合成CdTe量子点的主要影响因素, 通过改变无水乙醇-水体系的体积, 提高NaHTe的合成质量, 并调整反应温度, 改变反应的初始pH值, 在水相中快速合成了量子产率高、粒径分布范围窄的CdTe量子点, 实现了对量子点发光性质的调控, 在最佳条件(无水乙醇3 mL, 水1 mL, 反应初始pH 8.0, 反应温度40 ℃)下, 最高量子产率达68%. 量子点胶体溶液在回流过程中有时产生白色沉淀, 放置7 d后, 未过滤白色沉淀的量子点比过滤后的量子点荧光强度提高15%, 白色沉淀还有减小粒径分布的作用.     

白色荧光粉NaGd（MoO4）2:Dy3+,Eu3+的水热合成及发光性能

采用谷氨酸辅助水热法合成了八面体形NaGd(MoO4)2:Dy3+,Eu3+白色荧光粉.X射线衍射结果表明,合成的样品为四方晶系的NaGd(MoO4)2纯相.扫描电子显微镜照片显示所制备的粒子为八面体形,各边长约为2μm.荧光光谱结果表明,在NaGd(MoO4)2:4%Dy3+,yEu3+(y=0,0.5%,0.6%,0.7%,0.8%,0.9%,1.0%)样品中,随着Eu3+掺入量的增加,Dy3+的发射峰逐渐减弱,而Eu3+的发射峰逐渐增强,说明Dy3+-Eu3+之间存在能量传递.通过色坐标图可知,当Eu3+掺杂量y=0.9%时,荧光粉的色坐标(0.338,0.281)与标准的白光色坐标(0.33,0.33)接近,表明NaGd(MoO4)2:4%Dy3+,0.9%Eu3+是很好的近紫外光激发下的白色荧光粉.     

Characteristics of cobalt-based alloy coating on tool steel prepared by powder feeding laser cladding

Co-based alloy coating was deposited on tool steel by powder feeding laser cladding. Sections of such coatings were examined to reveal their microstructures and phases using scanning electron microscope (SEM) and X-ray diffractometer (XRD). The results showed that the prime phase (γ-Co dendrite) and other phases, including Cr₂₃C₆, Co₇W₆, and CrNi existed in the coatings. Some different solidification morphologies, such as planar (at the interface), cellular and dendrite formed, varying from the interface to the surface. Fine microstructures of γ-Co dendrite and lamellar eutectic in dendritical regions strengthened the coatings. Besides, the effects of aged treatment on the microstructure and microhardness of the surface coating were studied. Aged treatment led to the precipitations of some carbide particles (Cr₇C₃ and Co₃C) and boride particles (Co₄B) from the cladded coating, causing an increase in microhardness in the laser-cladded coating.     

感应叠加过程行波分析和模拟

 采用变换矩阵为研究工具对感应叠加过程中行波的传播、透射、反射进行了分析，得到了和集中参数分析一致的稳定解，给出了电压随时间变化的细节。建立了3.5 MeV注入器脉冲功率源和感应叠加结构的电路模型，得到的感应腔压模拟波形和实验波形基本一致，结合行波分析法基本解释了腔压波形和Blumlein线输出波形之间较大差异的成因，阴极叠加电压的模拟也反映了实验中主脉冲后的反射波形。     

Physically based molecular device model in a transient circuit simulator

Two efficient, physically based models for the real-time simulation of molecular device characteristics of single molecules are developed. These models assume that through-molecule tunnelling creates a steady-state Lorentzian distribution of excess electron density on the molecule and provides for smooth transitions for the electronic degrees of freedom between the tunnelling, molecular-excitation, and charge-hopping transport regimes. They are implemented in the fREEDA™ transient circuit simulator to allow for the full integration of nanoscopic molecular devices in standard packages that simulate entire devices including CMOS circuitry. Methods are presented to estimate the parameters used in the models via either direct experimental measurement or density-functional calculations. The models require 6–8 orders of magnitude less computer time than do full a priori simulations of the properties of molecular components. Consequently, molecular components can be efficiently implemented in circuit simulators. The molecular-component models are tested by comparison with experimental results reported for 1,4-benzenedithiol.     

Experimental study on laser cleaning of paint layer on white marble surface北大核心CSCD

In order to effectively remove the surface paint of the cultural relic of white marble, the area extrapolation method and laser-induced plasma spectroscopy (LIPS) method were used to obtain the ablation threshold power of the gold, silver paint layer and white marble surface. On the basis of this, the optimal laser power for removing paint without damaging the white marble substrate was determined. The image processing method was used to study the cleaning degree and variation trend of cleaning rate of the gold and silver paint on the surface of 10 mm×10 mm white marble by laser cleaning, and the optimal laser spot overlap rate and the optimal cleaning times were obtained. Finally, the image processing method was used to evaluate the cleaning effect of laser cleaning of paint layer on the white marble surface. More than 93% of the cleaning degree shows that the synergistic use of the area extrapolation method, LIPS method and image processing method can effectively improve the laser cleaning efficiency of the paint layer on white marble surface. Copyright ©2022 Journal of Applied Optics. All rights reserved.     

单一基质白光荧光粉Na3Sc2(PO4)3∶Tm3+,Dy3+的合成及发光性质

采用高温固相法成功制备了Na₃Sc_2-x-y(PO₄)₃∶xTm³⁺,yDy³⁺荧光粉,利用X射线衍射仪、扫描电子显微镜和荧光光谱仪对荧光粉进行了物相、形貌和发光性能进行了表征。 在Na₃Sc₂(PO₄)₃∶0.06Tm³⁺,yDy³⁺荧光粉中,物质的量分数6%的Tm³⁺和6%的Dy³⁺在360 nm激发下呈现出白光发射,其发射光谱在460~685 nm范围内存在Tm³⁺位于457 nm的特征发射峰,对应于Tm³⁺的³H₆→¹D₂跃迁,以及Dy³⁺位于483、577和672 nm处的3个特征发射峰,分别对应于Dy³⁺的⁴F_9/2→⁶H_15/2、⁴F_9/2→⁶H_13/2和⁴F_9/2→⁶H_11/2的跃迁。 观测到Na₃Sc₂(PO₄)₃∶Tm³⁺荧光粉的发射光谱与Na₃Sc₂(PO₄)₃∶Dy³⁺的激发光谱有较好的重叠,且Tm³⁺的荧光寿命随Dy³⁺浓度的增加逐渐降低,因此在Na₃Sc₂(PO₄)₃∶Tm³⁺,Dy³⁺荧光粉中存在Tm³⁺向Dy³⁺的能量传递。 利用Dexter和Reisfeld近似分析了能量转移机制,发现从Tm³⁺到Dy³⁺的能量传递临界距离为1.6 nm,能量传递过程是通过偶极-偶极相互作用进行的。 Na₃Sc₂(PO₄)₃∶0.06Tm³⁺,0.06Dy³⁺荧光粉具有较好的耐受热猝灭性能,在423、473和523 K时的发射强度分别为298 K时发射强度的97.6%、89.2%和78.6%。 随着Dy³⁺浓度的增加,Na₃Sc₂(PO₄)₃∶0.06Tm³⁺,yDy³⁺荧光粉的发光颜色由蓝色转变为白色,再由白色变黄色。 Na₃Sc₂(PO₄)₃∶Tm³⁺,Dy³⁺荧光粉作为一种可调色或单相白光荧光粉在发光二极管上具有潜在的应用前景。