Characteristics of deep penetration laser welding of dissimilar metal Ni-based cast superalloy K418 and alloy steel 42CrMo

Experimental trials of autogenous deep penetration welding between dissimilar cast Ni-based superalloy K418 and alloy steel 42CrMo flat plates with 5.0 mm thickness were conducted using a 3 kW continuous wave (CW) Nd:YAG laser. The influences of laser output power, welding velocity and defocusing distance on the morphology, welding depth and width as well as quality of the welded seam were investigated. Results show that full keyhole welding is not formed on both K418 and 42CrMo side, simultaneously, due to the relatively low output power. Partial fusion is observed on the welded seam near 42CrMo side because of the large disparity of thermal–physical and high-temperature mechanical properties of these two materials. The microhardness of the laser-welded joint was also examined and analyzed. It is suggested that applying negative defocusing in the range of Raylei length can increase the welding depth and improve the coupling efficiency of the laser materials interaction.     

络合滴定法测定低压流体输送用镀锌焊接钢管镀锌层重量

介绍了利用络合滴定法测定低压流体输送用镀锌焊风管镀锌层重量的方法，试样用稀硫酸溶解，在ＰＨ１．５￣２．０的弱酸性介质中，以磺基水杨酸钠为指标剂，用ＥＤＴＡ滴定铁，调ＰＨ为５．５，以ＰＡＮ为指示剂，用ＥＤＴＡ滴定锌，由ＥＤＴＡ用量求出锌的重量，用ＧＢ／Ｔ３０９１－９３方法比较，试验结果满意。     

管流系统的可控扰动装置及其应用

阐述了具有可控人工扰动装置的低背景湍动液体管流系统的研制和评价要点在及在高分子减阻液研究中的应用，并指出了这种实验系统在液体内流研究中的重要意义。     

Effective flow of a viscous liquid through a helical pipe

We study the flow of a viscous fluid through a pipe with helical shape parameterized with , where the small parameter stands for the distance between two coils of the helix. The pipe has small cross-section of size . Using the asymptotic analysis of the microscopic flow described by the Navier–Stokes system, with respect to the small parameter that tends to zero, we find the effective fluid flow described by an explicit formula of the Poisseuile type including a small distorsion due to the particular geometry of the pipe. To cite this article: E. Marušić-Paloka, I. Pažanin, C. R. Mecanique 332 (2004).

Résumé

On considère un écoulement dans un tube de section circulaire et de forme hélicoïdale paramétré par , où est la distance entre deux tours de la spirale. Le rayon de la section du tube est lui aussi supposé égal à . A partir de l'écoulement microscopique décrit par le système de Navier–Stokes et en utilisant l'analyse asymptotique par rapport à ce petit paramètre on obtient l'écoulemment effectif décrit par une formule explicite de type Poiseuille associée à une petite déviation due à la géometrie du tube. Pour citer cet article : E. Marušić-Paloka, I. Pažanin, C. R. Mecanique 332 (2004).     

Maxwell流体管内起动流的研究

对Maxwell流体流体管内起动流的振荡特性进行研究，得到了描述振荡特性的解析解。研究了黏弹性参数对各时刻速度剖面的影响，获得了轴心速度，平均速度和壁面摩擦力随时间的变化规律以及它们的频率特征。结果表明振荡的基频成分决定了流动的主要特性，给出了并分析了基频频率与振幅和黏弹性参数之间的关系。     

A variant of the low-Reynolds-number two-equation turbulence model applied to variable property mixed convection flows

Previous work has demonstrated that the low-Reynolds-number model of Launder and Sharma (1974) offers significant advantages over other two-equation turbulence models in the computation of highly non-universal buoyancy-influenced (or “mixed convection”) pipe flows. It is known, however, that the Launder and Sharma model does not possess high quantitative accuracy in regard to simpler forced convection flows. A variant of the low-Reynolds-number scheme is developed here by reference to data for constant property forced convection flows. The re-optimized model and the Launder and Sharma formulation are then examined against experimental measurements for mixed convection flows, including cases in which variable property effects are significant.     

热管冰蓄冷结构设计

从技术角度研究和探讨了热管做为冰蓄冷装置的适用性;对各种热管用金属管材与工质的特性进行了科学比较;从而最终确定了适宜冰蓄冷工作的热管管材、热管工质及其基本尺寸;为热管冰蓄冷装置的深入研究及推广应用,提供了强有力的理论依据。     

振荡流热管可视化实验

本文通过振荡流热管可视化实验,研究热管传热性能与流型的变化。实验中可观察到,振荡热管内工质运动通常处于“间歇-振荡”交替运行的状态。随加热功率的增大,间歇时间所占比例逐步减小。随着加热功率的增大,热管内的流型也发生相应变化,实验中主要观察到了泡状流、塞状流、环状流、局部波状流等多种流型。汽泡的生成、长大、聚合、分离和湮...     

阿尔法磁谱仪配电系统的热控系统设计及实验研究

本文以阿尔法磁谱仪中的配电系统为研究对象,阐述了利用热管解决配电系统局部温度过高的热控问题。通过数值模拟,采用体点散热问题的仿生优化方法,获得了高导热性的热管在母板中的人工构造,构建了一种有效的热控系统。数值模拟和实验结果对比验证了数值模拟模型的可靠性和仿生优化方法的可行性,也说明了热管在均温和传热方面的优良作用。     

新型平板热管换热器热回收效率特性实验研究

本文针对普通住宅房间设计了一台新型平板式热管换热器,该换热器结构紧凑、体积小巧。为研究该换热器的使用条件,本文开展了不同工质(R113、R141b以及这两种工质的混合物)对该热管换热器换热效率影响的实验研究。整个实验在夏季工况下进行,热管真空度为1×10~(-3)Pa,充液量(灌入热管换热器内的工质体积与热管换热器体积之比)为1/3。实验结果表明:该热管换热器热回收效率较高。在整个风量范围内,R141b作为工质的热管换热器换热效果最好,最高效率达到了58.2%。