Extraction and verification of coherent structures in near-wall turbulence

According to the characteristics of coherent structures in near-wall turbulence, an accurate extraction and verification method is developed based on wavelet transform (WT) and correlation analysis in this paper. At first, the fluid field of a turbulent boundary layer is measured precisely in a gravitational low-speed water tunnel. On the basis of the distribution of the coherent structures, velocity data of three test points are selected and analyzed, whose dimensionless heights are 20.8, 33.5, and 42.6. According to the frequency range of power spectrum density (PSD), coherent and incoherent structures are both extracted from the original signals using continuous and orthogonal wavelet transforms. To confirm the validity of the extracted signals, the probability density function (PDF) of each extracted signal is calculated. The result demonstrates that the incoherent structures obey the Gaussian distribution, while the coherent structures deviate from the Gaussian distribution. The PDFs of the coherent structures and the original signals are similar, which shows that the coherent structures make most contributions to the turbulence. For further verification, a correlation parameter between coherent and incoherent structures is defined, which evidently proves the validity of the extraction method in this paper.     

Comparative analysis of the effects of internal lasing oscillation and external light injection on semiconductor optical amplifier performance

One of the key differences of a semiconductor optical amplifier (SOA) with internal lasing oscillation (ILO) from a SOA with external light injection (ELI) lies in a carrier-sharing mechanism. Since the internal lasing mode shares the same pool of carriers with the signals, the carriers (or photons) withdrawn from the circulating laser mode speed up the gain recovery. On the other hand, the external light injected into the SOA shortens the carrier recovery time through optical pumping without any carrier sharing involved. To find out a better scheme, we have made a comparative investigation on the effects of the ILO and ELI on the SOA performance. It turns out by way of simulation that the ELI scheme provides faster gain recovery, shorter carrier lifetime, and higher saturation power when the external injection power is higher than the internal lasing power. The performance enhancement is not so pronounced with the carrier-sharing mechanism, as the internal lasing mode itself gives rise to severe longitudinal spatial hole burning (LSHB). Nevertheless, the ILO scheme is preferable for linear-amplification applications. We also examine the use of the ELI for low-crosstalk optical amplifiers. It is found that the ELI scheme does not bring in a very strong resonance peak in the crosstalk, which appears in a SOA with ILO due to relaxation oscillations of the lasing mode. In comparison to the ILO in SOAs, the ELI into SOAs is likely to leave more optical gain for multi-channel amplification without any sacrifice on the crosstalk.     

Effect of Ga doping on magneto-transport properties in colossal magnetoresistive La0.7Ca0.3Mn1−xGaxO3 (0<x<0.1)

Samples of La_0.7Ca_0.3Mn_1−xGa_xO₃ with x=0, 0.025, 0.05 and 0.10 were prepared by standard solid-state reaction. They were first characterized chemically, including the microstructure. The magnetic properties and various transport properties, i.e. the electrical resistivity, magnetoresistivity (for a field below 8 T), thermoelectric power and thermal conductivity measured each time on the same sample, are reported. The markedly different behaviour of the x=0.1 sample from those with a smaller Ga content, is discussed. The dilution of the Mn³⁺/Mn⁴⁺ interactions with Ga doping considerably reduces the ferromagnetic double exchange interaction within the manganese lattice leading to a decrease of the Curie temperature. The polaron binding energy varies from 224 to 243 meV with increased Ga doping.     

LCC谐振变换器的优化设计与实现

LCC谐振变换器是电除尘高频高压电源的核心器件,十分适用于高压大功率场合,针对连续模式应用于电除尘高频高压电源的不足,采用LCC谐振变换器断续模式进行优化设计。分析了带RC负载的LCC谐振变换器断续模式(简称DCM)的工作原理及拓扑结构,采用状态空间法推导了其数学模型,研究并建立了新颖的LCC谐振变换器断续模式下的损耗模型。在此基础上提出了一种基于遗传粒子群算法的LCC谐振变换器优化设计方法,该方法直观并且准确,实现了软开关技术,提高了电源的工作效率。并在现场通过一台72KV/85KW的电除尘高频高压电源样机验证了本文的正确性。     

用于长城等古建筑探测的NMR探测器的磁体设计

以万里长城为代表的古建筑是世界瑰宝,更是中华民族的象征和骄傲.本文提出利用便携式核磁共振（NMR）装置来探测研究这类古建筑的建筑材料,在不对其造成损伤的基础上,发掘其隐含的科学、技术和工程相关的丰富信息.为此,作为第一步,设计了适合于探测这类古建筑的便携式单边NMR探测器组合式磁体.该探测器的磁体结构以semi-Halbach为基础,通过不同磁体模块间的组合得到对应移动探测模式、长距离探测模式和均匀磁场探测模式的磁体结构.随后根据优化结果,设计加工了磁体组件,并采用该磁体进行了流体、长城城砖和现代红砖的NMR实验,实测结果与模拟一致.该组合式磁体的优点在于通过不同磁体模块组合,实现了多种探测方式,适用于探测长城等这类古建筑物需要多种探测模式的科学研究.     

第Ⅱ种强度不等的非对称两态叠加多模叠加态光场的偶数阶等阶N次方Y压缩

本文构造了由多模复共轭相干态的相反态|{-Z_j^(a)*}>_q与多模虚共轭相干态的相反态|{-iZ_j^(b)*}>_q这两者的线性叠加所组成的第Ⅱ种强度不等的非对称两态叠加多模叠加态光场|Ψ_Ⅱ^(ab)>_q,利用多模压缩态理论研究了态|Ψ_Ⅱ^(ab)>_q的任意偶数阶等阶N次方Y压缩特性.结果发现:1)在压缩阶数N取偶数,即N=2p的条件下,无论p=2m(m=1,2,3,…,…),还是p=2m+1(m=0,1,2,3,…,…),只要构成态|Ψ_Ⅱ^(ab)>_q的两个不同的量子光场态中各对应模的强度(即平均光子数)和初始相位都不相等,亦即R_j^(a)≠R_j^(b)和φ_j^(a)≠φ_j^(b)(j=1,2,3,…,q),并且 ,则当满足一定的量子化条件(或者在一些闭区间内连续取值)时,态|Ψ_Ⅱ^(ab)>_q总可呈现出周期性变化的、任意偶数阶的等阶N次方Y压缩效应.2)在N=2p且p=2m+1(m=0,1,2,3,…,…)的条件下,若R_j^(a)=R_j^(b)和φ_j^(a)=φ_j^(b)(j=1,2,3,…,q),态|Ψ_Ⅱ^(ab)>_q则可呈现出等阶N次方Y压缩简并现象.     

态|Ψ(3)〉q中广义磁场的不等幂次高次振幅压缩

利用多模压缩态理论,研究了一种新型的三态叠加多模叠加态光场|Ψ⁽³⁾〉_q中广义磁场分量(即第一正交相位分量)的不等幂次高次振幅压缩特性.结果表明:态|Ψ⁽³⁾〉_q是一种典型的三态叠加多模非经典光场,其广义磁场分量在一定条件下可呈现出周期性变化的、偶数次的不等幂次高次振幅压缩效应.     

高功率高增益大直径相对论返波管

对大直径同轴相对论返波管采用双板波纹波导模型结合电子运动的罗伦兹力方程、电荷连续性方程和电磁波麦克斯韦方程建立了系统的线性流体理论.使用该理论详细地研究了器件的各系统参数对束波相互作用,特别是对微波指数增长率的影响.给出了3cm波段的大直径同轴相对论返波管实验装置的系统参数.     

磁性材料进展

本文介绍了磁性材料近年来的进展及应用，主要是在高技术领域的发展和在提高性能、扩大应用范围中有那些技术加工手段及其所起的作用。     

溅射功率对多层膜质量的影响

用磁控溅射技术制备薄膜，用X射线衍射研究在基片和靶间距离固定的情况下不同的溅射功率对薄膜结构的影响。结果表明：过低的溅射功率下淀积的薄膜有畸变的X射线衍射特征峰，特征峰强度小，半峰全宽大。而比较高溅射功率得到的薄膜有比较尖锐的X射线衍射特征峰，强度高和半峰全宽非常窄。研究表明，X射线衍射特征峰强度小和半峰全宽大的薄膜结构疏松，而强度高和半峰全宽非常窄的薄膜结构致密。