Water wave radiation by a sphere submerged in water with an ice-cover

Using the multipoles method, we formulate the problems of radiation (both heave and sway) of water waves by a submerged sphere in deep as well as in uniform finite depth water with an ice-cover, with the ice-cover being modelled as an elastic plate of very small thickness. In each case this leads to an infinite system of linear equations which are solved numerically by standard techniques. The added-mass and damping coefficients for a heaving and swaying sphere are obtained and depicted graphically against the wave number for various values of the radius of the submerged sphere and flexural rigidity of the ice-cover to show the effect of the presence of ice-cover on these quantities. When the flexural rigidity is taken to be zero, the numerical results for the added-mass and damping coefficient for water with a free surface are recovered.     

An enantioselective Michael addition of malonate to nitroalkenes catalyzed by low loading demethylquinine salts in water

An enantioselective Michael addition of malonate to nitroalkenes is efficiently catalyzed by low loading demethylquinine salts in water; the yield range from 49% to 93% and the ee up to 90%.     

F－L模型的状态方程与退禁闭相变图象

用温度场论方法计算了Ｆ－Ｌ模型在有限温度和密度下的状态方程，分析了压强对净重子数密度的等温线．结果表明，在平均场近似下，Ｆ－Ｌ模型所给出的退禁闭相变为一级相变．     

PARTIAL VERSUS GENERAL STORAGE POLICY: COMMODITIES AND RESOURCES

This paper examines joint storage considerations when both commodities and resources can be stored, e.g., grain and water for irrigation. Results suggest that when separate agencies control public resource and commodity storage, suboptimal storage rules occur unless (i) each agency is sensitive to the policies of the other, (ii) commodity inventories are adjusted in response to prices, and (iii) resource inventories are adjusted in response to both commodity demand and resource supply conditions. For example, the common case where water storage depends on weather and reservoir conditions alone is not sufficiently general. The results imply that water management agencies that tend to be dominated by engineers and hydrological considerations need to incorporate economic considerations into decision processes.     

Three-dimensional structure of the calcite-water interface by surface X-ray scattering

The three-dimensional structure of the calcite (104)-water interface has been determined with surface X-ray scattering. Nine crystal truncation rods (including specular and non-specular rods) were measured providing both vertical and lateral sensitivity to the interfacial structure. The results reveal that calcite is nearly ideally terminated with a single surface hydration layer that includes two inequivalent water molecules having distinct heights of 2.3 ± 0.1 and 3.5 ± 0.2 Å, each with a well-defined lateral registry with respect to the calcite surface. No additional layering of water is observed beyond this surface hydration layer. Small displacements in the outer two calcium carbonate layers were also observed. These results are compared with previous experimental and computational results.     

Potential-dependent structure of the interfacial water on the gold electrode

Doubly tunable sum frequency generation (SFG) spectra demonstrate that the water molecules at gold/electrolyte interface change their orientation with applied potential. At negative potentials, water molecules in the double layer align with their oxygen atom pointing to the solution. As potential became positive to be close to the potential of zero charge (PZC), the SFG signal decreased, suggesting the OH groups of the water molecule are either in random orientation or parallel to the electrode. As potential became more positive than the PZC, the SFG signal increased again with the oxygen-up orientation as same as in the negative potential region, indicating that water molecules interact with the adsorbed sulfate anions. The peak position of the SFG spectra indicates a relatively disordered state of water molecules at the gold electrode surface, in contrast to the previously observed ice-like structure of water at electrolyte/oxide interfaces.     

Automated derivatization for on-line solid-phase extraction-gas chromatography; phenolic compounds

An automated system for derivaatization was coupled on-line with solid-phase extraction-gas-chromatography (SPE-GC). The system was optimized for the determination of phenol and chlorinated phenols in aqueous samples. The test analytes were acetylated with acetic anhydride; proper buffering of the sample was a critical factor. Next, the phenol acetates were enriched on a SPE cartridge and transferred to a GC; two appraoaches were studied. In the first approach, the derivatives were enriched on disposable C18 cartridges (ASPEC type) and desorbed with methylacetate. Aan aliquot of the final eluate was injected on-line the GC by means of a loop-type interface. In the second approach, trace enrichment was performed on 10 × 2 mm i.d. LC-type precolumn packed with polystyrenedivinylbenzene copolymer (PLRP-S) this precolumn was dried with a mitrogen purge and the phenol acetates were desorbed with ethyl acetate which was injectedon-line into the retention gap of the GC under partially concurrent solvent evaporation (PCSE) conditions. The Derivatization-SPE-GC system which was based on the loop-type interface has the advantage of simplicity and easy operation, the main drawback is the impossibility to determine phenol acetates which elute prior to trichlorophenol acetates. With the derivatization-SPE-GC approach using PCSE-based desorption, even the most volatile analyte of the test series, phenol acetate, can be determined successfully. The entire procedure, including the derivatization step, was fully automated and integrated in one set-up. The precision data for the integrated on-line derivatization-SP-FID system were fully satisfactory, with RSD values of 1–12 % at the 1 μg/1 level. When a sample volume of 2.2 ml was analyzed, The detection limits for the chlorinated phenol acetates were in the 0.1–0.3 μg/1 range.     

Determination of anions in rainwater by capillary electrophoresis with conductivity detection

A routine method for the determination of chloride, nitrate and sulfate anions in rainwater by capillary electrophoresis was developed. The system uses an end-column non-suppressed conductivity detector. Linear calibration plots were generated from 0.050 to 20 mg/l, which is the range generally found in wet depositions. Accuracy and precision were evaluated by analyzing certified standards of simulated rainwater and environmental samples, or by comparing CE results with those obtained by IC, the reference technique for anion analysis in wet deposition. The reproducibility of the method was satisfactory except at the lower and upper limits of the analytical range. Sensitivity lay in the range of few μg/l.     

一种自制的蒸馏水器保护装置

本装置由检测、控制、执行、报警和电源五部分组成。检测部分采用了靠正常水位导通的两根信号线。当蒸馏水器在正常运行时遇停水,本装置可立即实现断电保护,同时发出声光报警,有效防止干烧,杜绝事故发生。本装置制作简便,元器件均为市售,成本低廉,性能可靠。