土壤中不同极性污染物的亚临界水选择性萃取

研究了用亚临界水萃取技术选择性萃取土壤中3种不同极性的污染物:2,4-二氯酚(2,4-DCP)、4-氯联苯(4-PCB)和六氯苯(HCB)。研究了在不同温度下亚临界水对分析物的萃取效率。125℃时,萃取物主要是2,4-DCP;250℃时,主要萃取4-PCB和HCB。同时,研究了亚临界水萃取时间、萃取体积对3种物质的萃取效率的影响,确定了土壤中HCB的最佳亚临界水萃取条件为萃取水体积4mL,萃取时间75m in,萃取温度250℃。本方法用于实际样品中的HCB萃取,通过改变萃取温度,可以去除其它污染物对HCB测定的影响,测定结果与索氏提取-GC分析结果吻合较好。与USEPA标准方法8081A相比,本方法可以显著缩短萃取时间、简化净化步骤及减少有机试剂的用量。     

INFLUENCES OF ACID POST-TREATMENT ON THE MORPHOLOGY OF SOAPFREE P（MMA-EA-MAA） PARTICLES PREPARED BY SEEDED EMULSION POLYMERIZATION

Soap-free poly（methyl methacrylate-ethyl acrylate-methacrylic acid） latex particles with narrow size distribution were synthesized by seeded emulsion polymerization, and the porous particles were created by a stepwise alkali/acid treatment method. Effects of acid treatment conditions on the particle morphology were investigated. Results show that one to three pores were formed inside most of particles after post-treatment. At pH 7.0, when the treatment temperature was lower than 70℃, the size of particles and the volume of pores remained almost unchanged, and these two values increased significantly when the temperature was higher than 70℃. Both the particle size and the pore volume decreased with the increase of initial pH value and treatment time in the acid treatment. As the pH was below 4.0 and the treatment time was longer than 180 min, the particles shrunk in size.     

微波诱导Fe2O3/Al2O3催化剂催化氧化处理水中苯酚

 以γ-Al2O3为载体,采用浸渍-焙烧法制备了Fe2O3/Al2O3催化剂,并将其应用于微波诱导催化氧化处理模拟含酚废水. X射线衍射和X射线荧光光谱测试结果表明,活性组分氧化铁在催化剂中以α-Fe2O3的形式存在,其含量为3.71%. 与载体氧化铝相比,Fe2O3/Al2O3催化剂的比表面积和平均孔径及平均孔容略有降低. 对于100 mg/L的模拟含酚废水,最佳的处理工艺条件为: 微波辐照功率400 W,辐照时间5 min,催化剂加入量60 g/L,H2O2浓度600 mg/L,体系pH＞4. 在此工艺条件下,水中苯酚的去除率达97.98%. 催化剂连续使用20次后苯酚去除率仍达96.34%. 表观反应动力学研究表明,在氧化铁催化剂存在的条件下,微波诱导H2O2产生氧化性极强的羟基自由基,整个反应过程可分为微波诱导阶段和催化氧化阶段,两个阶段的氧化过程均符合一级反应动力学规律.     

高铁酸钾与饮用水处理

介绍了高铁酸钾的制备、性质以及在饮用水处理方面的应用。     

固相萃取技术及固定相络合法富集环境水样中微量金属离子的思路

固相萃取（Solid Phase Extraction SPE）是一种处于迅速发展中的样品前处理新技术,SPE技术在液体试样制备中以突出的优点已成为优先考虑的方法。本文旨在介绍SPE技术,并从配合物基本理论出发,首次提出“固定相络合法”富集环境水样中微量金属离子的思路。     

SDS及其与十二烷基三乙基溴化铵混合体系在矿化水中的表面活性

测定了十二烷基硫酸钠(SDS)、十二烷基三乙基溴化铵(DTEAB)单一体系及不同摩尔比的混合体系在矿化水溶液中的表面活性,并与在纯水和NaCl水溶液中的表面活性作了比较．所得结果表明：(1)阴离子表面活性剂SDS在含Ca^2 ,Mg^2 等的矿化水中有比在纯水和NaCl水溶液中更好的表面活性．这一方面是由于矿化水中的Ca^2 ,Mg^2 对负电胶团和表面吸附层的强烈电性作用,另一方面在大量Na^ 存在时,钠钙盐混合表面活性剂Krafft点提高不多;(2)SDS和DTEAB混合物在矿化水中具有很强的增效作用,其表面活性的变化规律与在纯水和NaCl水溶液中基本相同,表明阴阳离子表面活性剂混合体系具有优异的抗矿化水性能．这些结果可用阴、阳表面活性离子的电性作用解释．     

Stability of low levels of perchlorate in drinking water and natural water samples

Perchlorate ion (ClO₄⁻) is an environmental contaminant of growing concern due to its potential human health effects, impact on aquatic and land animals, and widespread occurrence throughout the United States. The determination of perchlorate cannot normally be carried out in the field. As such, water samples for perchlorate analysis are often shipped to a central laboratory, where they may be stored for a significant period before analysis. The stability of perchlorate ion in various types of commonly encountered water samples has not been generally examined—the effect of such storage is thus not known. In the present study, the long-term stability of perchlorate ion in deionized water, tap water, ground water, and surface water was examined. Sample sets containing approximately 1000, 100, 1.0, and 0.5 μg l⁻¹ perchlorate ion in deionized water and also in local tap water were formulated. These samples were analyzed by ion chromatography for perchlorate ion concentration against freshly prepared standards every 24 h for the first 7 days, biweekly for the next 4 weeks, and periodically after that for a total of 400 or 610 days for the two lowest concentrations and a total of 428 or 638 days for the high concentrations. Ground and surface water samples containing perchlorate were collected, held and analyzed for perchlorate concentration periodically over at least 360 days. All samples except for the surface water samples were found to be stable for the duration of the study, allowing for holding times of at least 300 days for ground water samples and at least 90 days for surface water samples.     

离子色谱-电感耦合等离子体质谱联用法测定水中痕量BrO-3及Br-

建立了离子色谱-电感耦合等离子体质谱联用技术(IC-ICP-MS)用于饮用水中的痕量BrO-3及Br-的测量.使用DIONEX Carbopac PA-100(4 mm×250 mm i.d.)在流速1 mL/min及5 mmol/L NH4NO3(pH 5.7)淋洗液下进行BrO-3和Br-的分离.该方法以100 μL进样量对BrO-3的检出限为0.0027 μmol/L(0.22 μg/L);对Br-的检出限为0.0067 μmol/L (0.54 μg/L).对水样的分析结果表明,所测矿泉水中的BrO-3浓度大大超出了世界卫生组织最新<饮用水水质准则>中所规定的溴酸盐的指导值,而所测量的青岛崂山区生活用水则未检出BrO-3.     

8-氨基喹啉-5-磺酸-示波计时电位法快速测定天然水体中锌形态

报道了8-氨基喹啉-5-磺酸(简称8-AQS)-示波计时电位法分别在酸性和碱性条件下测定了天然水样中的锌浓度,发现在酸性下测定的是无机不安定态锌c(Zni),而在碱性下测定的是总溶解态锌c(Zna)。并用该法测定了酸消化水样中的总锌c(ZnT),由c(Zna)-c(Zni)间接得到有机安定态c(Zn0),c(ZnT)-c(Zna)得到颗粒态酸溶态锌c(ZnT),据此可以实现对五种锌形态的区分。测定了10多个实际水样,与经典的离子交换-AES方法进行了对照,结果基本一致。     

State-of-the-art of membrane bioreactors: Worldwide research and commercial applications in North America

Membrane bioreactor (MBR) technology is advancing rapidly around the world both in research and commercial applications. Despite the increasing number of studies and full-scale applications of MBR systems, directions and trends in academic research as well as commercial developments require further analysis. This paper aims to critically characterize and review worldwide academic research efforts in the area of MBRs as well as focus attention to commercial MBR applications in North America. A total of 339 research papers published in peer-reviewed international journals from 1991 to 2004 and a total of 258 full-scale MBR installations in North America were used as the database for the analysis provided in this paper. After a surge of MBR publications in 2002, research appears to have reached a plateau in the last 3 years using both submerged and external MBR units. Although much of the pioneering research occurred in Japan, France and the UK, countries such as South Korea, China and Germany have significantly contributed to the research pool in the last 5 years. The primary research focus has been on water filtration MBRs with limited growth in extractive and gas diffusion MBRs which still hold un-tapped potential. Fundamental aspects studied in academic research predominantly involve issues related to fouling, microbial characterization and optimizing operational performance. Research in North America presents a unique picture as a higher ratio of industrial wastewater treatment and side-stream MBR applications have been studied compared to other parts of the world. For MBR commercial application, the North America installations constitute about 11% of worldwide installations. Zenon occupies the majority of the MBR market in North America, whereas Kubota and Mitsubishi-Rayon have a larger number of installations in other parts of the world. Due to more stringent regulations and water reuse strategies, it is expected that a significant increase in MBR plant capacity and widening of application areas will occur in the future. Potential application areas include nitrate removal in drinking water treatment, removal of endocrine disrupting compounds from water and wastewater streams, enhancing bio-fuels production via membrane assisted fermentation and gas extraction and purification MBRs.