重离子治疗计划系统的构想

对重离子柬治癌的优势进行简要的回顾，并着重介绍了用于重离子放射治疗的治疗计划系统。治疗计划系统是一套软件系统，不同的硬件设施应有与其相匹配的软件系统，即治疗计划系统。在此基础上，针对兰州重离子加速器的特点提出一些关于治疗计划系统方面的构想。After a brief review concerning the advantages of heavy ions in radiotherapy, more interests are concentrated on treatment planning system （TPS） for heavy ion radiotherapy. Compared to the hardware devices such as accelerator and beam delivery system, the TPS is a set of software system, and different therapy facilities require their corresponding TPSs. Based on the specialities of the Heavy Ion Research Facility in Lanzhou （HIIRFL）, some suggestions on the TPS for tumor therapy at HIRFL finally are given.     

Multifunctional ToF-SIMS: combinatorial mapping of gradient energy substrates

We present a simple method for chemical modification of chlorosilane self-assembled monolayers (SAMs) on Si surfaces by exposure to a gradient of UV-ozone radiation to create stable substrates with a range of contact angles (θ_H2O≈5–95°) and surface energies on a single substrate. These gradient energy substrates are developed to potentially generate libraries for combinatorial studies of thin film phenomenology, where a systematic variation of interfacial surface energy represents one of the significant parameters along one axis. The graded oxidation process presents a systematic variation of surface chemical composition. We have utilized contact angle measurements and time-of-flight secondary ion mass spectrometry (ToF-SIMS) to investigate this variation for a series of ions, among which are SiCH₃⁺, SiOH⁺ and COOH⁻. We show that the macroscopic measurements of surface free energy/contact angle correlate with the detailed analysis of surface chemistry (as assessed by ToF-SIMS) on these test substrates.     

Alloy formation in mechanically activated mixtures

The physical mixtures of hydroxocarbonates of Cu and Ni with aluminium were activated using a laboratory planetary mill. The chemical reactions and alloy formations as the effects of grinding were followed by the phase analysis of solid products based on the thermogravimetry and X-ray diffractometry. Experimental evidence indicates that the nature of reactions and products of mechanical activation was dependent on the amount of aluminium and time of grinding. This revised version was published online in July 2006 with corrections to the Cover Date.     

A Scanning Electron Microscopy study of water in soil

Cold stage Scanning Electron Microscopy (SEM) with a rapid cooling technique makes it possible to investigate the water phase within unsaturated porous media. It is thought that this technique preserves the main features of the micromorphology of the water menisci as it exists in the liquid phase in soils. Saddle-shaped elements, as well as pendular rings of water, were observed with concave and convex curvatures of the water-air interface. The hydraulic conductivity of an unsaturated soil may be inferred from SEM photographs. Observations of isolated water menisci indicate the existence of an immobile water domain. The surface geometry of the water menisci was analyzed quantitatively and surface tension and capillary pressure were determined.     

Solubility of carbon dioxide in aqueous solutions of sodium chloride: Experimental results and correlation

The solubility of carbon dioxide in aqueous solutions of sodium chloride was measured in the temperature range from 40 to 160°C, up to 6 mol-kg salt solutions and total pressures up to 10 MPa. Pitzer's⁽¹⁾ equations as well as the Chen and Evans⁽²⁾ model were used to correlate the new data. Results are reported and compared to literature data and correlations.     

Dehydration and dehydroxylation of reduced charge montmorillonite

Reduced charge montmorillonites (RCM) were prepared by the thermal treatment of lithiumsaturated montmorillonite. Samples prepared by mild thermal treatment with lithium contained more water sorbed than the original montmorrilonite. When RCMs were prepared, part of the lithium cations reacted with hydroxyl groups in the octahedral sheet and released protons, which reacted with the structure. Acid treatment probably enhanced the surface area. which was reflected in the amount of water sorbed. Deprotonation of hydroxyl groups was proved by the measurements of the ignition loss. The heating of lithium saturated montmorillonite at higher temperatures brough about the collapse of the interlayers and a decrease in the amount of water sorbed.     

超声波在废橡胶再生中应用的最新进展

全世界每年产生大量废旧橡胶，它们需要很长时间才能降解，这既污染环境，又浪费资源，解决此问题的唯一方法是再生利用。在众多再生方法中，新近出现的超声波脱硫再生法，被认为是最有希望的方法，本文详细地介绍了这方面的最新进展情况。     

采用热处理方法提高MEH-PPV单层聚合物有机发光二极管发光性能的研究

对以MEH－PPV为发光层的单层聚合物有机发光二极管（OLED）器件在最佳条件下进行真空热处理，并用金相显微镜观察施加电压后器件的阴极表面形貌。发现处理后的器件阴极表面的气泡及黑斑明显减少。器件的发光性能显著提高。与未经处理的器件相比，最大相对发光强度提高了一个数量级、启亮电压降低了2．0V，半寿命提高了12．7倍。初步分析表明热处理方法提高器件发光性能的主要原因在于有效地减少了器件在工作过程中由于焦耳热产生的某些气体，从而减少阴极表面气泡及黑斑的出现，另一方面，热处理方法也增强了有机发光层与阴极接触界面的结合力，提高电子注入水平。     

Unexpected end‐groups of poly(acrylic acid) prepared by RAFT polymerization

Low‐molecular‐weight poly(acrylic acid) (PAA) was synthesized by reversible addition fragmentation chain transfer polymerization with a trithiocarbonate as chain‐transfer agent (CTA). With a combination of NMR spectroscopy and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, the PAA end‐groups of the polymer were analyzed before and after neutralization by sodium hydroxide. The polymer prior to neutralization is made up of the expected trithiocarbonate chain‐ends and of the H‐terminated chains issued from a reaction of transfer to solvent. After neutralization, the trithiocarbonates are transformed into thiols, disulfides, thiolactones, and additional H‐terminated chains. By quantifying the different end‐groups, it was possible to demonstrate that fragmentation is the rate limiting step in the transfer reaction. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5439–5462, 2004     

A comparative study of the silent discharge treatment of saturated and unsaturated hydrocarbon polymers

Dielectric barrier air discharge treatment of polyethylene, polypropylene, polyisobutylene, polystyrene, and polyisoprene substrates has been characterized by x-ray photoelectron spectroscopy (XPS). The relative reactivities of these polymers towards silent discharge oxidation are rationalized in terms of ozone molecules interacting with an excited surface. © 1994 John Wiley & Sons, Inc.