The specific heat of the ferroelectric phase transition in N(CH3)4CdBr3

The specific heat of N(CH₃)₄CdBr₃ from 50 to 300 K has been measured by adiabatic calorimetry, using both static and dynamic methods. The obtained results have permitted a careful study of the ferro-paraelectric phase transition the crystal shows at 160 K. The available spectroscopic data have been used to generate a reliable baseline which accounts for the normal lattice contribution to the specific heat. These results allow for an accurate estimation of the phase transition thermodynamic functions: ΔH=2620 J·mol^?1 and ΔS=18.04 J·(mol°C)^?1. These high values are in agreement with the predictions of the 6 well potential Frenkel model.     

Thermal conductivity of the urea-hexadecane inclusion compound

The thermal conductivity and the heat capacity per unit volumec _p have been measured for the urea-hexadecane inclusion compound using the transient hot-wire method. Measurements were made under isobaric conditions at a pressure of 0.1 GPa and in the temperature range of 100–300 K. There was evidence for a phase transition at a temperature of about 160 K, in reasonable agreement with previous work. For the high-temperature phase was independent of temperature within ±1%. The low-temperature phase showed a weak temperature dependence, with (d In/d InT) _p = –0.13. It was inferred that interaction between acoustic phonons and low-frequency vibrational excitations of the guest molecules made a major contribution to the thermal resistivity. For the quantityc _p a weak maximum was observed in the region of the phase transition temperature.Dedicated to Dr D. W. Davidson in honor of his great contributions to the sciences of inclusion phenomena.     

Thermodynamic properties of lithium chloride ammonia complexes for application inahigh-lifthigh temperature chemical heat pump

Ammonia absorption by and desorption from lithium chloride at different pressures has been studied using high-pressure differential scanning calorimetry, for application in a high-lift high temperature chemical heat pump. The measurements were performed under isobaric as well as under isothermal circumstances. Clausius–Clapeyron plots were constructed and used to calculate the thermodynamic parameters and to determine the stability regions of the different complexes. Controversies in literature as to the real existing phases are resolved.     

Thermogravimetric analysis of the co-combustion of the blends with high ash coal and waste tyres

Incineration methods are becoming increasingly important from the view point of the need to minimize the environmental impact of waste tyre disposal. Combustion of waste tyre, one high ash coal and tyre-coal blends with 10, 30 and 50% waste tyre were investigated by means of thermogravimetric analysis (TGA) carried out at 20 K min⁻¹ in the temperature range from ambient temperature to 1273 K. And effects of the mixed proportion between coal and waste tyre on the combustion process, ignition and burnout characteristics were also studied. The results indicate that the combustion of waste tyre is controlled by the emission of volatile matter, the regions are more complex for waste tyre (three or more peaks) than for coal (one peak). Also as compared with the case of burning only high ash coal, the incorporation of waste tyre can improve the combustion characteristics of high ash coal, especially the ignition performance and the peak weight loss compared with the separate burning of waste tyre and coal. Moreover, comparisons of the TG-DTG profiles between experimental and calculational results, it is indicate that there is a comparatively important difference, the co-combustion characteristics is the coupling effect between waste tyre and coal. The data resulting also showed that the co-combustion of waste tyre and low quanlitied coal as fuel is feasible.     

<Emphasis Type="Italic">L</Emphasis>-Carnitine Supplementation: A New Paradigm for its Role in Exercise

Summary. Early research investigating the effects of L-carnitine supplementation has examined its role in substrate metabolism and in acute exercise performance. These studies have yielded equivocal findings, partially due to difficulties in increasing muscle carnitine concentrations. However, recent studies have proposed that L-carnitine may play a different role in exercise physiology, and preliminary results have been encouraging. Current investigations have theorized that L-carnitine supplementation facilitates exercise recovery. Proposed mechanism is as follows: 1) increased serum carnitine concentration enhances capillary endothelial function; 2) increased blood flow and reduced hypoxia mitigate the cascade of ensuing, destructive chemical events following exercise; 3) thus allowing reduced structural damage of skeletal muscle mediated by more intact receptors in muscle needed for improved protein signaling. This paradigm explains decreased markers of purine catabolism, free radical formation, and muscle tissue disruption after resistance exercise and the increased repair of muscle proteins following long-term L-carnitine supplementation.     

Wärmekapazitätsmessungen Nach Scanning-Methoden Bis Zu Hohen Temperaturen

Scanning calorimetric methods permit determination of heat capacities at high temperatures up to 1600°C. For disk systems with power compensation application limits are in order of 700°C, and for cylindrical systems with electrical calibration up to 1000°C. For the high temperature range above 1000°C DSC plates and a cylindrical calorimetric systems based on the CALVET principle ('MULTI HTC’) are known. For cylindrical calorimetric systems the precision of the Cp data is between 2 and 5% even at high temperatures without any requirements on the kind and shape of samples. These results are better than data provided by DSC plate systems. This revised version was published online in July 2006 with corrections to the Cover Date.     

Ferroelectric phase transitions in Pb2xSn2(1-x)P2Se6 system

Heat capacities of the Pb_2xSn_2(1-x)P₂Se₆ crystals (x=0, 0.098, 0.251, 0.402 and 1.0) were measured using an adiabatic calorimeter at temperatures between 10 and 350 K. In the crystal of x=0, two heat capacity anomalies corresponding to the ferroelectric commensurate - intermediate incommensurate(C-IC) phase transition temperature T _i, and the incommensurate - paraelectric (IC-N) phase transition temperature T _c, were observed at 193.24±0.10 and 220.07±0.15 K, respectively. The phase transition temperatures decreased with an increase in Pb²⁺ concentration. The anomaly at Ti disappeared at x=0.251 in the mixed systems of the Pb_2xSn_2(1-x)P₂Se₆. In the crystal of Pb₂P₂Se₆ (x=1.0), no phase transition was observed. The normal heat capacities for the mixed crystals were determined by least squares fitting of the Debye and Einstein functions to the experimental data. The anomalous heat capacities gave the phase transition entropies of 8.5 and 1.5 J mol^-1 K^-1 for x=0. The large transition entropies are consistent with an order-disorder mechanism in the ferroelectric-paraelectric phase transitions in x=0. This revised version was published online in August 2006 with corrections to the Cover Date.     

The ionization of perchloric and hydrofluoric acids in aqueous solution

Cyclical bifurcated hydrogen bonded structures are proposed for aqueous solutions of hydrofluoric acid and for the bifluoride ion which are consistent with the spectral data. The structure proposed for HF is also applicable to solutions in organic solvents. Raman spectra of tetramethylguanidinium perchlorate suggest that the corresponding Raman spectra of perchloric acid solutions may not be interpreted in terms of a completely dissociated acid. Other evidence including activity coefficient, heat capacity and partial molal volume data suggest that there is some association in relatively dilute perchloric acid solutions between the perchlorate ion and the hydrated proton. This association decreases in concentrated aqueous solutions.     

Volumes,heat capacities and solubilities of amyl compounds in decyltrimethylammonium bromide aqueous solutions

Apparent molar heat capacities and volumes of amylamine (PentNH₂) 0.02m, capronitrile (PentCN) 0.02m and nitropentane (PentNO₂) 0.009m in decyltrimethylammonium bromide (DeTAB) micellar solutions, in water and in octane were measured at 25°C. By assuming that their concentration approaches the standard infinite dilution state, heat capacities and volumes were rationalized by means of previously reported equations following which the distribution constant between the aqueous and the micellar phase and heat capacity and volume of the additives in both phases are simultaneously derived. The present results are compared to those we have previously obtained for pentanol (PentOH). The thermodynamic properties of PentNH₂ in water and in micellar phase are substantially identical to those of PentOH but different from those of PentCN and PentNO₂ whereas the opposite behavior was observed in their pure liquid state and in octane. The nature of the solvent medium seems to affect the thermodynamic behavior of PentNH₂. Also, the study of the apparent molar heat capacities of the amyl compounds investigated here in micellar solutions as a function of surfactant concentration shows evidence of a maximum at about 0.4m DeTAB, which can be attributed to a micellar structural transition. Accordingly, the solubilities of PentCN and PentNO₂ as a function of the DeTAB concentration drop in the neighborhood of the concentration where heat capacities display the maximum.     

Volume and heat capacity of model non-aqueous self-assembly systems

Blends of immiscible polymers are often stabilized by block copolymers which can form non-aqueous micelles and microemulsions in the liquid polymers. The phase diagrans, apparent volumes and apparent heat capacities of model non-aqueous binary and ternary systems were studied in order to investigate the conditions under which such self-assembly systems could form. 1,2-Hexanediol, which can cosolubilize hexane and ethyleneglycol, forms inverse micelles in hexane and weak microaggregates in ethyleneglycol. Genapol X-060, a commercial alcoholic surfactant containing on the average an aliphatic chain of 13 carbons and 6 oxyethylenes (C₁₃E₆), forms microaggregates in poly(ethyleneglycol) 400. These self-assembly systems are strengthen in the presence of a third component which has an affinity for the inner phase.Presented at the Symposium, 76^th CSC Congress, Sherbrooke, Quebec, May 30–June 3, 1993, honoring Professor Donald Patterson on the occasion of his 65^th birthday.