Double perovskite oxides Sr_2Mg_(1-x)Fe_xMoO(6-δ) for catalytic oxidation of methane

The double perovskite oxides Sr2Mg1-xF exMoO6-δ were investigated as catalysts for the methane oxidation.The structural properties of catalysts were characterized in detail by X-ray diffraction,X-ray photoelectron spectroscopy and X-ray absorption spectroscopy.The catalytic property was strongly influenced by the Fe substitution.The relation between catalytic performance and the degree of Fe substitution was examined with regard to the structure and surface characteristics of the mixed oxides.The Fe-containing catalysts exhibited higher activity attributable to the possible(Fe2+,Mo6+) and (Fe3+,Mo5+)valency pairs,and the highest activity was observed for Sr2Mg0.2Fe0.8MoO6-δ.The enhancement of the catalytic activity may be correlated with the Fe-relating surface lattice oxygen species and was discussed in view of the presence of oxygen vacancies.     

电化学溶解金属铜制备纳米CuO

有机电解合成;铜电极;水解;电化学溶解金属铜制备纳米CuO     

The influence of the sacrificial anode nature on the mechanism of electrochemical arylation and alkylation of white phosphorus

The material of the sacrificial anode has a substantial effect on the nature and yield of the target products of electrochemical phosphorylation of organic halides by white phosphorus in the presence of the nickel complexes with 2,2"-bipyridine. The use of the zinc anode results in the products with tricoordinated phosphorus, viz., triorganylphosphines, the reaction on the aluminum anode affords triorganylphosphine oxides, and the presence of Mg²⁺ ions in the reaction mixture provides the transformation of white phosphorus into cyclic phosphines (PhP)₅.     

C K‐edge NEXAFS study of fluorocarbon formation on carbon anodes in molten NaF–AlF3–CaF2

Operational instability from processes occurring at the anode during the production of aluminum in the commercial Hall‐Héroult process may lead to an increase in undesirable fluorocarbon emissions, higher energy use, and shorter plant life. One contribution to this instability may be the possible formation of a fluorocarbon film at the electrode interface. Here, the surface composition of graphite anodes after electrolysis in molten NaF–AlF₃–CaF₂ at 990 °C is investigated for evidence of fluorocarbon formation using C K‐edge near edge X‐ray absorption fine structure. Fluorocarbon is identified on an anode surface after prolonged anode effect (very high overpotential with increased cell resistance) and also on an anode surface after normal electrolysis without anode effect. This provides evidence that fluorocarbon formation may occur prior to anode effect lowering the surface tension of the anode and therefore resulting in dewetting to contribute to the onset of the anode effect. Confirmation that such compounds form furthers our understanding of electrochemical reactions of graphite with fluoride and of the fundamental processes that occur in an aluminum smelter cell. Copyright © 2013 John Wiley & Sons, Ltd.     

锂离子二次电池碳负极材料的改性

作为锂离子二次电池的碳负极材料，其改性方面的研究内容主要有：引入非金属元素，引入金属元素，处理表面及其它方面。纺入的非金属元素有硼，硅，氮，磷和硫。引入的金属元素有钾，铝，镓和钒，镍，钴，铜，铁等过渡金属元素。表面处理的方法包括氧化，形成表面层等。     

电沉积Al/Pb-Ag阳极在电积锌过程中的耐腐蚀性

采用电沉积的方法在甲基磺酸镀液中制备了一种新型的锌电积Al/Pb-0.23%Ag阳极。 腐蚀实验和电化学分析显示,Al/Pb-0.23％Ag阳极与传统Pb-0.25％Ag阳极相比,具有较低的腐蚀速率,较高的腐蚀电位和较低的腐蚀电流密度,较高的电催化活性;金相显微镜、扫描电子显微镜和X射线衍射分析显示,Al/Pb-0.23％Ag阳极的晶粒细小、致密,极化48 h后有PbSO4、α-PbO2和β-PbO2生成。     

Anode Magnetron Enhanced DC Glow Discharge Processes for Plasma Surface Cleaning and Polymerization

The objective of this study was to examine some fundamental factors involved in the design and construction of the anode magnetron dc glow discharge processes as well as its performance in plasma cleaning and polymerization. Those advantages of anode magnetron include the capability of the magnetron to operate at low pressure, as well as decreasing the thickness of cathode dark space, i.e., the negative glow which contains a higher concentration of ions and active species was more closely to the cathode surface, which makes the plasma surface cleaning and polymerization an effective and uniform processes. The deposition rate at a given discharge power is increased by the presence of anode magnetrons, and is also much higher relative to rf and af. The refractive index of dc plasma film at a given polymer thickness (such as TMS, 70 nm, RI: 2.4) is higher than rf, af, and cascade arc plasma (RI: 1.6–1.7).     

电化学合成镍配合物的研究

采用金属镍为“牺牲”阳极，首次在无隔膜电解槽中，电化学溶解金属镍一步 制备了纳米NiO前驱体Ni(Oet)2,Ni(Obu)2,Ni(Oet)2(acac)2，Ni(Obu)2(acac)2 [acac为乙酰丙酮基].产物通过红外光谱（FT-IR）、拉曼光谱（Raman spectrum） 进行表征。同时讨论了影响电合成镍醇盐及其配合物的关键因素。实验表明，防止 阳极钝化，温度控制在30-40℃，采用有机胺溴化物为导电盐，可以提高电合成效 率。     

磷的掺杂对碳负极材料性能的影响

研究了磷酸的引入对以聚丙烯腈为基体碳负极材料性能的影响．元素分析、ＸＰＳ及ＸＲＤ分析结果表明，磷在碳材料中与碳及氧原子相结合．磷酸的引入在较低的温度（６００℃）下有利于聚丙烯腈－ＣＮ基的环化、脱氢碳化过程，使氮的含量及ｇｒａｐｈｅｎｅ氮的相对含量增加，磷的键合使碳材料的层间距反而增加，因此位于０．９Ｖ以上及以下的可逆容量均随磷酸的加入量的增加而增加，总的可逆容量高达５２４ｍＡｈ／ｇ．而在较高的温度（１０００℃）下，碳化程度变化不大，主要表现为磷原子的掺杂效果，其引入使位于１．０Ｖ左右的可逆容量增加     

Cellulose-precursor synthesis of nanocrystalline Ce<Subscript>0.8</Subscript>Gd<Subscript>0.2</Subscript>O<Subscript>2−δ</Subscript> for SOFC anodes

Developments of intermediate-temperature solid oxide fuel cells (IT SOFCs) require novel anode materials with a high electrochemical activity at 800–1070 K. The polarization of cermet anodes, made of nickel, ceria and yttria-stabilized zirconia (YSZ) and applied onto a YSZ solid electrolyte, can be significantly reduced by catalytically active ceria additions, the relative role of which increases with decreasing temperature. Further improvement is observed when using Ce_0.8Gd_0.2O_2– (CGO) having a high oxygen ionic conductivity instead of undoped ceria, owing to enlargement of the electrochemical reaction zone. Nanocrystalline CGO powders with grain sizes of 8–35 nm were thus synthesized via the cellulose-precursor technique and introduced into Ni–CGO–YSZ cermets, and tested in contact with a (La_0.9Sr_0.1)_0.98Ga_0.8Mg_0.2O_3– (LSGM) electrolyte at 873–1073 K. The results showed that the anode performance can be enhanced by additional surface activation, in particular by impregnation with a Ce-containing solution, and also by incorporation of YSZ, which probably acts as a cermet-stabilizing component. The overpotential of the surface-modified Ni–CGO (25 wt%–75 wt%) anode in a 10% H₂/90% N₂ atmosphere was approximately 110 mV at 1073 K with a current density of 200 mA/cm².Presented at the OSSEP Workshop Ionic and Mixed Conductors: Methods and Processes, Aveiro, Portugal, 10–12 April 2003