透射式跑道能见度激光测量仪的研究

介绍了一种利用激光测量跑道水平及斜视能见度的智能化仪器。该仪器主要由光学系统、信号放大与处理系统及显示系统三部分组成。简要介绍了该仪器的基本结构、工作原理和主要技术指标，讨论了其中的技术难点及其相应的解决办法。     

超快光电测量技术

本文综述了近年来趔快光电测量技术的新进展，其中包括扭快光电材料的特性、高速光电器件的基本原理，着重介绍了若干主要的用快光电测量技术．     

钢卷尺刻度在线测量系

本文介绍了一种钢卷尺刻度在线测量系统 ,它采用了高速摄像及计算机数据处理技术 ,文章阐述了系统的非接触动态测量原理 ,描述了光电信号的处理方法 .     

电子自旋共振准三维图象的重建方法

根据投影切片原理, 设计了一个简单而有效的ESR图象重建算法和程序, 可利用样品的一集ESR谱, 方便地绘制出样品在某截面的自旋密度立体轮廓图、等值图和散点密度分布图等, 为分析和研究自旋密度的分布及其性质, 提供了直观依据。作为应用, 文中给出了石英杜瓦受紫外光辐照后产生的局部晶格缺陷——F心的空间分布图, 图中清楚表明, F心的浓度与辐照方向和辐照强度的密切关系, 与试验结果完全相符。     

Accuracy and long-term reproducibility of lead isotopic measurements by multiple-collector inductively coupled plasma mass spectrometry using an external method for correction of mass discrimination

The precision of isotopic measurements of Pb by thermal ionization mass spectrometry (TIMS) is limited by the fact that this element does not possess an invariant isotope ratio that can be used for the correction of mass fractionation by internal normalization. Multiple-collector inductively coupled plasma mass spectrometry (MC-ICPMS) can overcome this limitation, because with plasma ionization, elements with overlapping mass ranges are thought to display identical mass discrimination. With respect to Pb, this can be exploited by the addition of Tl to the sample solutions; the mass discrimination factor obtained for Tl can then be used for the correction of the measured Pb isotope ratios. In this article we present the results of a detailed study that investigates the accuracy and precision of such an external correction technique for mass discrimination based upon the results of multiple analyses of a mixed standard solution of NIST SRM-981 Pb and SRM-997 Tl. Our data indicate that normalization of the Pb isotope ratios to the certified isotopic composition of SRM-997 Tl produces Pb isotopic results that are significantly lower than recently published reference values by TIMS. This systematic offset can be eliminated by renormalization of the Pb data to a different Tl isotopic composition to obtain an empirically determined mass discrimination factor for Pb that generates accurate results. It is furthermore shown that a linear law is least suited for the correction of mass discrimination, whereas a power or exponential law function provide significantly more accurate and precise results. In detail, it appears that a power law may provide the most appropriate correction procedure, because the corrected Pb isotope ratios display less residual correlations with mass discrimination compared to the exponentially corrected data. Using an exponential or power law correction our results, obtained over a period of over seven months, display a precision (2σ) of better than 60 parts per million (ppm) for ²⁰⁸Pb/²⁰⁶Pb and ²⁰⁷Pb/²⁰⁶Pb and of better than 350 ppm for ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb/²⁰⁴Pb, and ²⁰⁸Pb/²⁰⁴Pb. This represents a significant improvement compared to conventional TIMS techniques and demonstrates the potential of MC-ICPMS for routine, high-precision measurements of Pb isotopic compositions.     

Surface forces in foam films from ABA block copolymer: a dynamic method study

The thinning of foam films from aqueous solutions of an ABA triblock copolymer of polyethylene oxide and polypropylene oxide (average molecular weight 14,000 g/mol) is studied experimentally. The dependence of the surface forces on film thickness is obtained by the dynamic method of Scheludko and Exerowa.The total surface force measured in foam films (radius 60–70 m) from 10^–5 M (0.014 wt%) polymer solution with 0.1 M NaCl is positive at thicknesses from about 800 down to 460 . The electrostatic repulsion is negligible while the contribution of van der Waals attraction is small (within 15%). Therefore a positive surface force component predominates. Most probably it arises from steric interactions between the hydrophilic polyethylene oxide tails of the polymer. The dynamic method appears to be a suitable technique for exploring the stabilization of foam films from ABA copolymers.     

Product or sum: comparative tests of Voigt,and product or sum of Gaussian and Lorentzian functions in the fitting of synthetic Voigt‐based X‐ray photoelectron spectra

A comparative study for the fitting of X‐ray photoelectron spectra (XPS) using different model functions is presented. Synthetically generated test spectra using Gaussian/Lorentzian convolution and a real measured spectrum are fitted with the three commonly used models: product, sum and Gaussian/Lorentzian convolution functions. In these limited tests, it was found that the sum function is superior to the product function, particularly for low‐noise spectra. Copyright © 2007 John Wiley & Sons, Ltd.     

表面热电离质谱的进展

本文评述了表面热电离质谱（ＴＩＭＳ），特别是负离子质谱（ＮＴＩ－ＭＳ）对非金属和具有高电离电位的金属元素的同位素测定的进展，引用文献３４篇。     

冷态德士古气化炉流场与停留时间分布的研究

测定了德士古气化炉的冷态速度分布和停留时间分布。结果表明：德士古气化炉内在轴向２．５～３．０倍直径范围内存在回流，最大回流量为射流量的３．５倍左右；在平均停留时间之前，已有５０％左右的物料逸出炉外。本文指出，德士古气化炉中存在的问题，如结渣、耐火砖寿命短、有效气体成分偏低均与炉内流场有关。