总延误问题顺时安排法的性能比

给定一组工件的加工时间与工期，要求确定这些工件在一台机器上的加．工排列，使相应的总延误达到最小，这就是总延误问题．该问题在近年已被证明是NP困难的．由Wilkermn和Irwin（1971），林勋（1983）等所研究的顺时安排法能得到相邻交换意义下的局部解．在本文中，我们进一步证明该算法能得到前移邻域意义下的局部解，并确定了该算法的性能比．     

矿渣粉加固粉土的理论分析及路用性能研究

提出了矿渣粉加固粉土的相关理论。将矿渣粉在加固土中的作用归结为火山灰胶凝效应和微集料填充效应,而火山灰胶凝效应又可进一步归结为水化作用、激发作用和离子交换作用;认为微集料填充效应与矿渣粉细度极为相关;用框图归纳了矿渣粉加固土的两种作用效应。进行了矿渣粉、石灰粉加固土无侧限饱水抗压强度、水稳定性、冻稳定性、温度收缩和干燥收缩等路用性能试验,并进行比较。结果表明,矿渣粉加固土所测路用性能指标优于石灰粉加固土。为工程应用提供了试验依据。     

我国AB股双重上市公司经营业绩变化的实证分析

本文以46家在上海和深圳同时上市AB股的公司的样本,分析了公司实行双重上市前1年及其后4年的经营业绩的变化趋势以及股权结构和上市顺序对它的影响。研究表明,双重上市当年及其后4年经营业绩显著下降;股权结构和上市顺序对公司经营业绩影响明显。最后,文章提出了改善AB股公司经营业绩的对策建议。     

Complications of collagen injection of the vocal fold: report of several unusual cases and review of the literature

Injection laryngoplasty is one of the most frequently performed procedures in patients with voice complaints. Various biomaterials have been used to medialize vocal folds or to treat symptoms of vocal fold scar. The ideal biomaterial would be easily injected through a fine-gauge needle, well tolerated, and long lasting. Injectable collagen preparations fulfill at least two of these criteria, and collagen has been used widely for vocal fold injections. MATERIALS AND METHODS: We present a retrospective review of two unusual complications of collagen injection and a review of the relevant literature on the complications of medical use of collagen compounds. RESULTS: Two patients in whom collagen was injected formed firm submucosal deposits that interrupted the normal mucosal wave and produced significant dysphonia. Surgical removal of these deposits restored the mucosal wave and improved voice quality. Management of this unusual complication of human collagen injection in the vocal fold has not been reported previously. Other complications of collagen injection include hypersensitivity reactions to bovine collagen, local abscess formation at injection sites, and possibly induction of collagen vascular disease in some patients. CONCLUSIONS: Although collagen injections of the vocal fold rarely result in complications, physicians using collagen must be familiar with the types of complications that can occur. Proper diagnosis and prompt management of complications can result in good outcomes.     

Synthesis of self‐photosensitizing polyesters containing donor–acceptor norbornadiene moieties and benzophenone groups and their photochemical reactions

The ring‐opening copolymerization of a glycidyl ester derivative having a benzophenone group and the donor–acceptor norbornadiene (D‐A NBD) dicarboxylic acid, 5‐(4‐methoxyphenyl)‐1,4,6,7,7‐pentamethyl‐2,5‐norbornadiene‐2,3‐dicarboxylic acid, monoglycidyl ester derivatives with D‐A NBD dicarboxylic anhydride using tetraphenylphosphonium bromide as a catalyst proceeded smoothly to give novel self‐photosensitizing NBD polymers in good yields. The molecular weight of these polyesters was about 4,000, and lower than that of analogous NBD polymers having no benzophenone group. All the synthesized NBD polymers isomerized smoothly to the corresponding quadricyclane (QC) polymers upon UV irradiation in tetrahydrofuran (THF) solution and in the film state. The rate of the photoisomerization of the D‐A NBD moieties in these polymers was higher than that of the D‐A NBD moieties in the polymer having no photosensitizing group. Furthermore, the rate of the photoisomerization of the D‐A NBD moieties in these polymers was also higher than that of the NBD polymer with low molecular weight photosensitizer in dilute solution. The photo‐irradiated polymers having QC moieties released thermal energies of 146–180 J/g. The D‐A NBD moieties contained in these NBD polymers possessed fair to good fatigue resistance. The degradation of the NBD moieties in these polymers was 15–30% after 50 repeated cycles of interconversion. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2978–2988, 2007     

Synthesis and characterization of wholly aromatic poly(azomethine)s containing donor–acceptor triphenylamine moieties

N‐(4‐nitrophenyl)‐4′,4″‐bisformyl‐diphenylamine was synthesized from N‐(4‐nitrophenyl)‐diphenylamine by the Vilsmeier‐Haack reaction. Soluble aromatic poly(azomethine)s (PAMs) were prepared by the solution polycondensation of N‐(4‐nitrophenyl)‐4′,4″‐bisformyl‐diphenylamine and aromatic diamine in N‐methyl‐2‐pyrrolidone (NMP) at room temperature under reduced pressure. All the PAMs are highly soluble in various organic solvents, such as N,N‐dimethylacetamide (DMAc), chloroform (CHCl₃), and tetrahydrofuran (THF). Differential scanning calorimetry (DSC) indicated that these PAMs had glass‐transition temperatures (T_gs) in the range of 170–230 °C, and a 10% weight‐loss temperatures in excess of 490 °C with char yield at 800 °C in nitrogen higher than 60%. These PAMs in NMP solution showed UV‐Vis charge‐transfer (CT) absorption at 405–421 nm and photoluminescence peaks around 462–466 nm with fluorescence quantum efficiency (Φ_F) 0.10–0.99%. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of these PAMs can be determined from cyclic voltammograms as 4.86–5.43 and 3.31–3.34 eV, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4921–4932, 2007     

Vessel Arrival Process and Queueing in Marine Ports Handling Bulk Materials

We study the vessel arrival process in bulk ports handling either cargo containers or minerals. Then we introduce the SHIP/G/1 queue to be able to study the queueing behavior at the port. We present approximations for the asymptotic probabilities of delay and the number of vessels at the port. Numerical examples show the accuracy of the approximations. In appendices, we provide details of the analysis of the number of vessels at the port and the correlation properties of the vessel arrival process.     

Analysis of a Multiserver Queue with Setup Times

This paper deals with the analysis of an M/M/c queueing system with setup times. This queueing model captures the major characteristics of phenomena occurring in production when the system consists in a set of machines monitored by a single operator. We carry out an extensive analysis of the system including limiting distribution of the system state, waiting time analysis, busy period and maximum queue length. AMS subject classification: 90B22, 60K25     

Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007