含茂钛低聚物的制备与光谱

文中报道两种新的含茂钛低钛物Cp_2Ti(Cl)-O-[-Ti(Cp)(O_2CCH_4CH-O)-O-]n-H(Ⅰ)与Cp_2Ti(Cl)-O-[-Ti(Cp)(O_2CCH_2CH)-O-]_u-H(Ⅰ)的制备并用元素分析和光谱(IR,1~H NMR,MS)对它们进行了鉴定。     

High-Resolution,Higher-Order UV/VIS Derivative Spectrophotometry

Derivative spectrophotometry has gained increasing importance in the past two years and is currently experiencing vigorous development. Following and introduction the present article provides a review of this extremely effective method. In particular, the advantages of higher-order derivative spectrophotometry (HODS method, n > 2) are discussed on the basis of practical examples from a wide range of analytical fields. The results are achieved with the aid of a newly developed analog computer unit, whereby for the first time readily reproducible, low-noise, on-line spectra can be obtained up to the 7th order and even, in favorable cases, up to the 9th order. In practice it has proved valuable to work with spectra of the 3rd to 5th order; but even higher derivations could be profitable for the separation of strongly superposed signals or for “fingerprinting”.     

Optical Properties of Model Compounds of Polyaniline

The UV and visible spectra of six model compounds were studied. These compounds can be considered as models of polyaniline in the reduced, cation radical, partially oxidized and oxidized forms. After treatment of a mixture of equal molar quantities of the reduced form (DPPD) and the oxidized form (QDIM) with acid, the following reaction was observed: DPPD(I)+QDIM(III)+2H⁺=2DPPD⁺(II) After similar treatment of the partially oxidized form (V) with acid, the radical cation salt formed. The UV and visible spectra of polyaniline in the reduced form, oxidized form and conductive form are similar to the spectra of DPPD, QDIM and DPPD⁺ or radical cation salt of V respectively. We propose that the polyaniline synthesized by chemical oxidation of aniline consists of oxidized and reduced repeat units. Upon protonation a redox reaction (or electron rearrangement) occurs and forms delocalized radical cations (polarons) in the polymer chain which are highly conductive.     

Synthesis, crystal structure and properties of K2Ta2S10: A novel ternary tantalum polysulfide with TaS8 polyhedra forming infinite anionic chains

The new ternary alkali tantalum polysulfide K₂Ta₂S₁₀ has been synthesized by reacting TaS₂ with an in situ formed melt of K₂S₃ and S at 773 K. The compound crystallizes with four formula units in the monoclinic space group P2₁/n (No. 14) with lattice parameters of . The structure contains two different zigzag chain anions [TaS₅]⁻, running parallel to the crystallographic b-axis separated by potassium cations. The two crystallographically independent tantalum atoms are in a distorted bi-capped trigonal prismatic environment of eight sulfur atoms which was never observed before. The TaS₈ polyhedra share three S atoms on each side to form the anionic chains. The compound was characterized with FIR and Raman spectroscopy.     

Vacuum Ultraviolet Photolysis of Polyethylene,Polypropylene, and Polystyrene

Using infrared reflection absorption spectroscopy (IRRAS), quartz crystal microbalance (QMB) measurements, and X-ray photoelectron spectroscopy (XPS) in combination with chemical derivatization techniques the VUV photolysis of polyethylene (PE), polypropylene (PP), and polystyrene (PS) was investigated. A mass balance obtained from the quantification of the data was used to suggest reaction path ways. Although PE and PP behave similar, the mass loss is about 8 times higher in the case of PP. These differences originate from the higher disproportionation to recombination ratio for the branched polymer. Both polymers form double bonds and at extended treatment times they tend to crosslink. PS is rather stable due to the possibility of the energy dissipation by fluorescence.     

Extension of conjugation leading to bathochromic or hypsochromic effects in OPV series

Four OPV series 1-4 (a-d) with a terminal dialkylamino group as electron donor were prepared by Wittig-Horner reactions. To study the influence of the push-pull effect on the long-wavelength absorption, three of the four series contained terminal acceptor groups (CN, CHO, NO(2)). The length of the chromophores strongly affects the intramolecular charge transfer (ICT)-an effect which superimposes upon the extension of the conjugation. Increasing numbers n of repeat units cause an overall bathochromic shift for the purely donor-substituted series 1 a-4 a and the series 1 b-4 b with CN as weak acceptor. The two effects annihilate each other in the series 1 c-4 c with terminal CHO groups, so that the absorption maxima are almost independent of the length of the chromophore. A hypsochromic shift is observed for the series 1 d-4 d, which contains the strong acceptor group NO(2). This anomaly disappears on protonation of the dialkylamino group because the push-pull effect disappears in the ammonium salts. The results can be explained by semiempirical quantum mechanics (AM1, INDO/S). The HOMO-LUMO transition, which is mainly responsible for the ICT, becomes less important in the electron transitions S(0)-->S(1) when the distance between donor and acceptor is increased. The commonly used VB model, which contains an electroneutral and a zwitterionic resonance structure, is contrasted with a MO model with dipole segments at both ends of the OPV chains. The latter model turned out to be more appropriate-at least for donor-acceptor-substituted OPVs with n >/= 2.     

Cadmium colloids from non-aqueous solvents

Cadmium colloids have been prepared by Chemical Liquid Deposition (CLD). The metal is evaporated to yield atoms which are solvated at liquid nitrogen temperature, and upon warming, stable liquid colloids are formed with particle size ranging between 25–100 Å. Zeta potentials were calculated according to the conversion of Hunter and the Hückel equation, for ethanol and dimethyl sulphoxide. UV/VIS measurement of most of the black colloids showed absorption band around 280 nm. For comparison, we prepared CdS colloid with size 400–625 Å. The colloids are stable to oxidation in air and/or oxygen bubbling. The synthesis of colloids and films from Cd with acetone, 2-butanone, ethanol, 2-propanol, 2-methoxyethanol, DMF and DMSO is reported. Transmission Electron Microscopy (TEM) allows us to determine particle size.     

Synthesis, X-ray structure and properties of a new nitrite-bound copper(II) complex with 2-(3,5- dimethylpyrazol-1-ylmethyl)pyridine in a CuN4(O) coordination

Synthesis and characterization of a nitrite-bound copper(II) compound [CuL⁴)₂(ONO)]ClO₄ have been achieved (L⁴ = 2-(3,5-dimethylpyrazol-1-ylmethyl)pyridine]. The bidentate ligand L⁴ provides a pyridine and a pyrazole donor site; however, they are separated by a methylene spacer. The complex has been structurally characterized and it belongs to only a handful of complexes having nitrito-bound mononuclear copper(II) centre. The metal atom has a distorted square pyramidal geometry with the copper atom displaced from the equatorial plane by 0.25 Å. In MeCN solution the green complex exhibits a broad ligand-field transition at 655 nm with a shoulder at 675 nm and in dichloromethane-toluene glass (80 K) it exhibits an EPR spectral feature characteristic of the unpaired electron in the d_x²−y² orbital. Variable-temperature (80–300 K) magnetic susceptibility measurements in the solid state as well as room temperature measurement in MeCN solution reveal mononuclear magnetically dilute copper(II) centre. When examined by cyclic voltammetry (MeCN solution) it displays electrochemically irreversible Cu^II---Cu^I response [cathodic peak potential, E_pc (V vs saturated calomel electrode (SCE)): −0.32]. An oxidative response is observed at 1.14 V, probably due to bound-nitrite oxidation and is partially removed to generate a solvated complex at the electrode surface. The latter species gives rise to reversible Cu^II---Cu^I redox response [ ].     

Azocalixarenes: Synthesis, Characterization, Complexation, Extraction, Absorption Properties and Thermal Behaviours

Azocalixarenes, which have a conjugated chromophore azo (–N=N–) group in p-positions, are synthesized in “one-pot” procedures in satisfactory yields. Their structures in the solid and solution are elucidated by UV–vis, FT-IR, ¹H and ¹³C NMR spectroscopic methods as well as elemental analysis techniques. Some of them are complexed with metal ions (alkali, alkaline-earth and transition metal ions) under neutral conditions. A wide variety of applications is expected by the functionalization of the side arms. The selective liquid–liquid extraction of various alkali, alkaline-earth and transition metal cations from the aqueous phase to the organic phase is carried out by using azocalixarenes. Furthermore, the synthesized azocalixarenes are utilized for selective extraction of Fe³⁺ cations from the aqueous phase to the organic phase. The effects of varying pH and solvent upon the absorption ability of azocalixarenes substituted with electron-donating and electron-withdrawing groups at their o-, m-, p-positions are examined. The thermal behaviours of azocalixarenes containing upper rim functionalized groups are investigated by means of thermogravimetry (TG), differential thermal analysis (DTA) and differential thermogravimetry (DTG).     

The reactions of 2-benzoylpyridine with [RuHCl(CO)(PPh3)3] and [(C6H6)RuCl2]2

The reactions of [RuHCl(CO)(PPh₃)₃] and [(C₆H₆)RuCl₂]₂ with 2-benzoylpyridine have been examined, and two novel ruthenium(II) complexes – [RuCl(CO)(PPh₃)₂(C₅H₄NCOO)] and [RuCl₂(C₁₂H₉NO)₂] – have been obtained. The compounds have been studied by IR and UV–Vis spectroscopy, and X-ray crystallography. The molecular orbital diagrams of the complexes have been calculated with the density functional theory (DFT) method. The spin-allowed singlet–singlet electronic transitions of the compounds have been calculated with the time-dependent DFT method, and the UV–Vis spectra of the compounds have been discussed on this basis.