钠离子电池微/纳结构电极材料研究

钠离子电池电极材料资源丰富,价格低廉. 然而,现阶段钠离子电池电极材料的性能还不理想,开发合适的电极材料是实现髙容量、长循环寿命钠离子电池的关键. 本文将以作者近期的研究工作为主,着重讨论几种微/纳米材料作为钠离子电池电极的性能及作用机理,并展望其今后的发展趋势.     

锂-空气电池性能的影响因素及研究进展

锂-空气电池理论比能量高达3622 Wh·kg^-1(设阴极还原产物为Li₂O₂), 远超过目前已有的任何电池, 有希望成为新一代的二次电池. 然而, 目前其实用化研究还处于探索阶段, 在其商用之前还有许多工作要做. 对影响锂-空气电池性能的因素以及近期的研究进展进行综述, 总结了阴极材料的组成和微观结构、电解质的种类及组成、阴极疏水膜、电池结构设计、电池的组装及充、放电的工艺过程等对电池比能量、比容量以及循环性能等的影响, 概述了锂-空气电池的表征手段, 并对锂-空气电池的应用前景进行了展望.     

Simulation and design of an X-band overmoded input cavity

The RF input cavity is an important component for velocity-modulating types of microwave device,providing velocity modulation and density modulation.Conventional RF input cavities,however,encounter the problem of power capacity in the high frequency band due to the scaling law of the working frequency and device size.In this paper,an X-band overmoded input cavity is proposed and investigated.A resonant reflector is employed to reflect the microwave and isolate the input cavity from the diode and RF extractor.The resonant property of the overmoded input cavity is proved by simulations and cold tests,with PIC simulation showing that with a beam voltage of 600 kV and current of 7 kA,an input power of 90 kW is sufficient to modulate the beam with a modulation depth of 3%.     

Novel optical packet with non-return-to-zero label and duobinary carrier-suppressed return-to-zero payload

A novel packet format with non-return-to-zero (NRZ) label and duobinary carrier-suppressed return-to-zero (DCS-RZ) payload is proposed for optical packet switching networks.NRZ label is followed by DCS-RZ payload with a certain guard time.The spectra of the low-rate NRZ label locate around the optical carrier frequency where some parts of the corresponding spectra of the high-rate DCS-RZ payload have been suppressed due to DCS-RZ modulation.At the switching node,the label or payload extraction can be realized simply through an optical bandpass or notch filter respectively.The feasibility of the scheme is verified by the simulation on the famous photonic design platform designed by Virtual Photonics Inc.(VPI).The effects of optical filter bandwidth on the received signal quality are discussed by analyzing bit error rate(BER)and contrast ratio performances.     

非水系锂空气电池的正极材料和电解液研究进展

锂空气电池的能量密度是传统锂离子电池的5~10倍,可与汽油相媲美。近几年来,锂空气电池因此受到了人们的广泛关注。本文概述了锂空气电池正极材料和电解液的最新研究进展。从商业碳、具有特定形态的碳材料、催化剂、导电聚合物等几个方面阐述了正极材料;从物质结构的角度,简要介绍了锂空气电池中常用的酯类、醚类、砜类、胺类和离子液体等电解液。最后指出了目前锂空气电池存在的问题,并对其进行了展望。     

La1-xSrxCu0.9Fe0.1O2.5-δ阴极材料的合成与电导率研究

采用低温燃烧合成技术制备了Lal-xSrxCu0.9Fe0.1O2.5-δ(x=0.1-0.4)粉体。利用X-射线衍射(XRD)和差热分析(DTA)技术对粉体的性能进行了表征。XRD结果表明,经800℃焙烧的La0.9Sr0.1Cu0.9Fe0.1O2.5-δ粉体的对称性较低,未形成钙钛矿结构,其余Lal-xSrxCu0.9Fe0.1O2.5-δ(x=0.2-0.4)粉体为四方钙钛矿结构,晶体结构参数之间满足关系式a=b≈2(2c)~(1/2)。DTA结果证明Lal-xSrxCu0.9Fe0.1O2.5-δ在800℃以下是热力学稳定的,不会发生分解反应。采用直流四电极法测试了Lal-xSrxCu0.9Fe0.1O2.5-δ试样在100—800℃之间的电导率。试样的电导率~(ln(σT)与1/T之间呈很好的线性关系,说明Lal-xSrxCu_(0.9)Fe0.1O2.5-δ在测试温度范围内服从小极化子导电机制。Sr掺杂量对试样的电导率和电导活化能有着明显的影响,当Sr掺杂量为0.3时,Lal-xSrxCu0.9Fe0.1O2.5-δ的电导率最高,电导活化能最小。     

低温固相反应合成Li3V2(PO4)3正极材料及其性能

利用V₂O₅·nH₂O湿凝胶，LiOH·H₂O，NH₄H₂PO₄和C等作原料，通过低温固相还原反应在550 ℃焙烧12 h制备出Li₃V₂(PO₄)₃正极材料。采用XRD，SEM和电化学测试对Li₃V₂(PO₄)₃样品性能进行研究。XRD研究表明本法所合成的Li₃V₂(PO₄)₃同传统的高温固相反应法所合成的Li₃V₂(PO₄)₃一样同属于单斜晶系结构。SEM测试表明所合成的样品平均粒径大小约为0.5 μm且粒径分布较窄。电化学测试表明以0.2 C的倍率放电时，样品的首次放电容量为130 mAh·g^-1，室温下循环30次后其比容量为124 mAh·g^-1。     

Recent Advances in Surface Coatings of Layered Cathode Materials for High-Performance Sodium-Ion Batteries

Layered transition metal oxides (layered materials) have the advantages of simple synthesis methods, high average operating voltages, and good specific capacity, and are therefore promising cathode materials for sodium-ion batteries (SIBs). However, the capacity retention of these materials is poor due to the dissolution of transition metals caused by the detrimental reactions of the electrode with the electrolyte and the rupture of the electrode due to volume expansion during cycling. Studies have discovered that surface modification can effectively improve the aforementioned problems. This paper reviews the effects of different coating materials (e. g., carbon coatings, metal oxide coatings, phosphate coatings, etc.) on the performances of layered cathode materials and analyzes the reasons for the improved performance. In addition, the limitations of different coating materials and coating methods are presented, and future developments are proposed.     

锂离子电池正极材料LiV3O8-xClx的低温固相法合成及电化学性能研究

采用低温固相法成功地合成了锂离子电池正极材料LiV3O8-xClx (x=0.00,0.05,0.10,0.15)。分别用XRD、SEM、充放电实验、循环伏安、交流阻抗等测试方法研究了Cl- 的掺入对LiV3O8结构、形貌及电化学性能的影响。结果表明, Cl-的掺入显著地提高了材料的充放电循环性能。当掺杂量 x=0.10时,材料的循环性能最好, 循环100周后放电容量仍为198.6 mAh/g。     

新方法合成LiFePO4/C

以Fe(NO3)3·9H2O、LiNO3、NH4H2PO4和蔗糖为原料,在超临界CO2流体中反应合成,进而经二次焙烧制得LiFePO4/C。 结果表明,在超临界CO2流体中经50 ℃反应24 h,在350和600 ℃焙烧后制得粒径分布在0.5~1.0 μm的纯LiFePO4/C,该材料作为锂离子电池正极的放电比容量达156.6 mA·h/g,经50次循环后容量几乎没有衰减。